How to Remove Windshield Washer Pumps 07-14 Chevy Suburban

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@Kungfujoe1110]

Just followed this tutorial - worked great. Just a heads up though, you preeeetty much have to take the wheel off - Unless you're running rather small wheels, I kind of doubt you'll be able to get the fender liner far enough out of the way to re-install. Getting the bottle in there sideways so you can hook up the front motor wiring and fluid line is...I don't want to say "impossible", but lord knows I couldn't do it, and I ended up taking the wheel off and that made all the difference - still difficult, but doable. Also, if you want to verify this is the issue before going through the hassle, there are two motors there, the black one is for the rear and the white one is for the front - stick the probes of a multimeter into the plug and set it to 12V and make sure you're getting 12V read out when somebody pushes the front/rear windshield washer buttons. For me, I was getting 12V to the front, but the motor was dead, so I replaced it and now it all works good. Also also, drain the fluid bottle before removing the bolts - the thing is kind of heavy and I think I had it hanging by the harness wires while it drained, which is...not ideal. To drain it, pull one of the lines (which you have to do anyway), stick something under it (or don't, up to you), and go have a sandwich. The video kind of shows that though, but these fancy pantses have a lift, so it's a bit different for them.

[@chrisgunn9054]

Great video ❤❤❤. Very easy to remove

[@frankie3591]

Crap man. Excellent 👌 video. Mine front just stopped working. I am hoping it's only the fuse, going to go check. I don't want to do all this work, it's freezing out there 🥶 Update: So went to take off the battery plate but could not. I have propane tank on my suburban (dual Fuel, still have gas) and so there was equipment there like pump etc. My fuel mileage is like a Honda Civic, but that's a whole different topic. So I opened the wheel well and tried to reach the electrical wire. Luckily that came off easy (hopefully it wasn't disconnected or I threw away a good pump.) Anyways, once wire was off, I managed to get the pump out and new one in and Magic....I have front windshield washer working. Now if your's is back, you definitely need to take the whole thing down cause that is not reachable. Anyways, thanks for Video and the part. All good now. Now only if you can make it stop snowing 😁

[@1AAuto]

+ROGER Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@ahmedalkareemi816]

Thank you so much it was helpful but ....it will be better if explain which pump if front and which is rear

[@1AAuto]

+Ahmed alkareemi Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

[@notthebees69]

I think the top one is the rear pump so the rear doesn't use all the fluid, since the front is more important to clean.

[@hawkmasters11]

What causes the motor for the windshield washer to run while the lights are on? I'm at a loss on this.

[@stevennicola1655]

My trucks washer fluid runs on its own randomly to the point where it burnt out. What could be causing this.

[@frankie3591]

20999342 - Front Pump 20999343 - Back Pump Or 1AWWR00180 A1 Auto has whole reservoir with both pumps for a good price. Thanks 👍