How to remove write protection from sd card

[@jamismirs8353]

wow cool post, thanks for sharing

[@ITMagics]

Welcome and stay with us

[@ahmadchheena378]

Ĺklm loop on a Sunday 🌃 I 95 ooooooo on a Sunday 🌃 I love the new house in order and one other time to do that again please open up

[@KhantiLocal]

Thanks

[@houssemsaidaoui2143]

the ready only state was already "no" so all what you did was fake

[@VanKliess]

Hey bro, It worked for me! Maybe you were facing a different issue??

[@alexmercer6585]

@@VanKliess nah he just extra smart

[@VanKliess]

@@alexmercer6585 exactly, lol

[@citysupplies]

Worked fine, first time didn't work then used upper case. Unfortunately he typed attributes as attribites.

[@Ataxanrakhminov]

my sd card is white protected too when i go to properties it's says this sd card is white protected and read only but when i go to cmd/bootdisk or whatever that is it's says read only (NO)

[@danielalexandre89]

Your read-only attribute was already off And you missed type attributes (attribites) in the last part so it shows unrelated text at the end

[@elnin16]

yes, not successful operation

[@samuelwhyte5361]

The point where you entered " attributes disk clean read-only" did not work on mine. But rather "attributes disk clear readonly" . If anyone has a problem when they entered the former command, they can try the latter. Thanks

[@dariusmurimi1803]

thankz

[@sheller94]

Thanks ma-man .....I would never have been able to work THAT out. Well done !!

[@westcoastsigns9675]

Your method worked for me as well - at least in the DOS screen. Tried to format card after and still says write protected 😢 so close….

[@apexmuzik]

thanks allot

[@Kamesuko]

My man 💪

[@shubhaayande6247]

2:29 mine shows "Current Read-Only State : Yes" and yours it's "No" And after completing the process it didn't work

[@engr.aianjay]

same

[@melorhadebe8929]

Same

[@aungminhein246]

Same here

[@sifatmahmud6347]

Same

[@rounakbanerjee5615]

Yes I can't figure out how to solve it

[@hellotorin]

*SOLVED* This may not apply to your specific situation. I was using a SD card adapter, connected to an SD port USB adapter, because the info was stored on a microSD. The culprit was the SD card adapter. I noticed that the SD port USB adapter also had a slot for microSD cards. So I took the microSD card out of the SD card adapter and just slid it directly into the microSD slot of the USB adapter and it worked! The SD card adapter must have put up some sort of barrier or prevented efficient re-formatting. Note that the SD card adapter was NOT in the physical 'locked' mode AND that I had done what all these other websites and videos had told me to do (CMD prompt, regedit, etc).

[@masterjao1546]

Thanks Mate now I realize that the sd card has no issue actually. The cause why my sd card is write protected because the small selector set to write protected. After I adjust, the write protected info has gone. Thanks mate.

[@ossytrikz2413]

I think I'm in the exact same issue. I've tried everything to remove write protection but it's not working. Could you elaborate more on your experience?

[@DS.Debabrata_Saha]

@@ossytrikz2413 same problem I'm facing

[@ossytrikz2413]

@@DS.Debabrata_Saha 3 months later and I'm still stuck with a write protected sd card.

[@DS.Debabrata_Saha]

@@ossytrikz2413 me too

[@jerrycampbell9376]

Didn't work, even when I DIDN'T mis-spell "attributes". Also, it's suspicious that the disk you "fixed" displayed as not write-protected to begin with.

[@jerrycampbell9376]

Additional note: I DID manage to unlock the Micro SD card I had, by simply putting it in an adapter that had a switch on it (like a full-sized SD card does). With that, the micro card promptly started to behave and accept formatting.

[@passion5356]

wow man thanks haha

[@oyenen]

Clear not clean...

[@theamer-rican6865]

Those adapters with the switch don’t really help all the switch does is engage the switch either on the computer or disable writing. There is a switch inside the pc that the switch hits disabling write protection if you open the sub with a write lock witch you will see it actually doesn’t have anything to do with the inside of the chip itself. It’s basically a bypass switch

[@TheYogina]

@@jerrycampbell9376 Thanks man, that made it work!! God bless, you rock!!

[@Darkside23123]

If you are having a similar problem eject the sd card move the lock position to the other side. Thank me later😂

[@moises_corona]

Thanks bro fucking quick step

[@dianaxrose9]

I felt like such an idiot I was worried that my SD card on my homebrewed 3DS wasn’t working and that all the games I downloaded were gone until I saw your comment thank you 😅😂

[@Enzania]

Waw, its work man thanks

[@chousam7848]

non pas "attributes disk clean readonly" mais "attributes disk clear readonly"

[@montassardridi5380]

Merci

[@mshivakumar3301]

If you're using a sd card with the adapter (which we use in camera) then see if you have switched to lock on the physical adapter. If yes then unlock it and you're good to go

[@tomtam2152]

Dude, you just scored!!! It didn't wotk for me, but when i changed the card reader, everything is fine... Thank you bro

[@kumarsaurabh1034]

I am also facing the same problem....now i will change the card reader....after that i will post my review...

[@akinwoyeoluwatosin9467]

Thanks it worked fot me..u save me alot of trouble

[@ray2976]

thank you so much 😭 I'm glad I read the comments

[@AnushtupGhosh_AG]

You're from West Bengal ?

[@paundemba9433]

These kinda gave me hope coz everything was just goin fine but in the end nothin worked

[@mycreations4527]

On the sd card there is a switch if it’s flipped down it’s write protected if it’s flipped up then it’s not Flip it up and It shouldn’t be right protected anymore

[@SprinX69]

@@mycreations4527 it won't work

[@SprinX69]

@@mycreations4527 hmm., I will try it

[@mushna13]

@@mycreations4527 thank u so much u saved my life

[@DTD110865]

@@mycreations4527 If that really worked, there wouldn't be a need for more complex methods like the one in this video. And even that doesn't work.

[@teonneebetheaa8885]

Some windows you have to put "ATTRIBUTES DISK CLEAR READONLY".

[@ranjeetkumarjha5060]

When I follow all steps Still my SD card not in list . I tried too much still not sd card option came. I think this work only for pendrive not for sd card Please help

[@NaveenKumar-bc3ry]

this is incredible, you friends are posting like its working but in real it doesnt work.. really pissed off from your videos....

[@TonySkittleAlive184]

same here....just gotta buy another sd card!!! grrrrr!!!

[@muhanadk2910]

because he did it wrong mate,,, he wrote Attribites instead of Attributes in the last command

[@citysupplies]

After correct spelling use uppercase.. Worked 100pc unlocked card

[@codedynamics1]

doesn't work for me. After typing "attributes disk CLEAR readonly" ... It's says "sd card successfully formatted" but the sd card is still full of data lol

[@chandrairawan8677]

yes

[@snipera39]

same here

[@elizabethanastasia8038]

Me too

[@NostraGamingYT0883]

Bro did u fix this prblm

[@bhavishyayadav4934]

Bro he told to write attributes disk clear readonly but he wrote attribites disk clear readonly watch video carefully

[@aryankharinta460]

Changed the Pendrive at 4:20. Nice Job.

[@StarTrail-jx7yu]

Itx a fake video

[@timeclickerstudio]

thank for information its worked , but one correction is there command you mention is wrong (attributes disk clear readonly) clean replace with clear

[@Xenos_Bee21]

Its not attributes its attribites that is for the second part 3:18

[@soahammallik7685]

To all those having trouble Type attributes disk clear readonly in upper case

[@Nithin_M17]

It was so much helpful for me thank you even it was a five year back uploaded video now it helped me alot

[@ITMagics]

Glad it helped!

[@officialsambrown95]

did not work but when i unlocked the sd chip it worked big thank you my boy subscriber earned and my trust

[@ITMagics]

Congress and stay with us

[@officialsambrown95]

@@ITMagics I will

[@ITMagics]

Thanks

[@officialsambrown95]

@@ITMagics no problem

[@jovannietalangan4947]

Thaank u much! Now my sd card is working. Keep it up sir and that makes me ur subscriber. 🤗👍👍

[@ITMagics]

Thanks

[@PankajKumar-i9v1y]

Outstanding video,... It helps a lot to me.... Love you bro... keep it up,...

[@ITMagics]

It's my pleasure

[@gulammustafanayem2629]

I got my memory damaged after following your steps

[@Mast-k9t]

😂

[@clinton08]

😂😂😂

[@renebea9]

the command is "clear". not "clean".

[@isaactech121]

New sub added bro your legit it worked very well thanks to you my 1TB is now back😱🤩

[@shaikhfawad9530]

After doing all this its still coming write protected

[@gouravtiwari2848]

Same 🥴

[@comensal]

It worked. Finally, I can put music into my SD card (It is a buletooth player which supprt SD key as well).

[@leekycharms]

your a legend. thank god. mine was loading for a while in the beggining with the "diskpart" command but it eventually worked

[@Lycansrule]

Or just move the little white thing on the side of the big sd card Down . Move it Down. It works

[@josephparsons9732]

Lol although I have to say I tried that and it didn't work

[@josephparsons9732]

You know what actually I just realised I moved it down not up thank you so much you actually don't know how much you helped me😂

[@Lycansrule]

@@josephparsons9732 ok . 😅 glad it worked for u . Ama edit the comment to "MOVE IT DOWN . DOWN"

[@josephparsons9732]

@@Lycansrule haha ok😂

[@gooddaymedia9910]

This did not work for me. It is 6 years later, so the software could have changed. Everything looked the same on my screen up until I typed "Attribute disk clean readonly." I only got a couple lines in response to that rather than the long response you received. I'm curious if you or anyone else can offer some insight.

[@bushrakhatoon1306]

Thanks for sharing. It worked and my usb is now not readonly. Happy...

[@ITMagics]

💕💕

[@dhavalpandav6592]

I do all the precces which you describe in the video but still my usb is not going to format

[@balamurugansundaravadivel9423]

Same here, how did you fixed it?

[@DearKnowledge]

Hey everyone!!!! I had the same problem and I searched the whole KZbin but nothing worked.... then *"i removed the SD-Card from my mobile and then put it back"* the problem was solve and write protection was removed! So I decided to share with you guys😃

[@DS.Debabrata_Saha]

*What is the meaning of "Put SD card in Back"* Please explain

[@DravenBrian101]

unclear tutorial.... misspelled the command "attributes" to attribites, then system provided a list of proper commands, then the next step performed in the video was to type "exit" which ends the diskpart process. HTF did the SD card got fixed here? very unclear!

[@muhanadk2910]

you just did it wrong by typing the word "Attributes" in wrong way as " Attribites" and you continued without having the messege succesful at the end of command and pretend at the last that you have done it !!!

[@adriankylecarino391]

it worked bro. I think "attribites" is correct. Type attribites instead of attributes at the last part.

[@socialservicesplanetbft]

thank you stay blessed its working for me

[@ITMagics]

Enjoy

[@what22beat]

hey !! are you from Bangladesh ??

[@Just_ghaly]

kosomak nothing solved

[@emmanuelkwesiamoah8056]

Those using sd card adapter. Just make sure it is unlocked and you are good to go.

[@nipunkaushallya4420]

Thnks a lot. I fixed the my sd cards and pen drives.

[@ITMagics]

Glad it helped

[@villano_gringo_negro]

Worked for me... only thing was the last command was "attribites" and not "attributes".😊

[@AkosMusings]

DISKPART> ATTRIBUTES DISK CLEAR READONLY ■ Disk attributes cleared successfully 🙌🏾🙌🏾🙌🏾🙏🏾

[@georgiaobserver]

Diskpart said it cleared it but when I tried copyng a file to the disk the disk was still read only.

[@arslaniqbal653]

I successfully completed the procedure, but it still shows the same error while trying to format? What should I do?

[@Olly630]

Bro thank you so much 😭😭😭 i will subscribe

[@TaylorTimeTv]

Anyone know how to do this for Mac ? 🥴

[@hannahnekelly9236]

YES! Got snap. I'll explain over there. Then you can block me after

[@TaylorTimeTv]

@@hannahnekelly9236 I can download it hold on

[@hannahnekelly9236]

@@TaylorTimeTv Hnekelly is my snapchat. I'll delete it as soon as you add me. So I don't have ransoms messaging me.

[@wolflover0912]

Never mind I found the issue 😅😅😂 my adaptor's thing was on lock so I had to unlock it so 😅😅 but thanks for the tip so next time if it happens I'll know what it might be😂

[@emiwahengbam]

thank you its working so easy n simple explanation

[@AestheticLinesUrdu]

After hitting" Attributes disk clean readonly" , it says "The arguments specified for this command are not valid".

[@twentykhongsit3917]

When I use the clear readonly command it says" the arguments specified for this command are not valid" how to fix it???????

[@gouravdhwn]

This song was like I'm on a side quest

[@XCCON2009]

Why isn't it working for me?? I followed step by step. Wrote attribites like he had, but still write protection.

[@youren8]

I followed this to the T and it still says it is write protected, after removing the card and re-inserting.

[@karuanmax7821]

wil it remove write protection or just formats the sd card ???

[@dblacktamiltech9722]

Thanks sir successful formated very useful video 👏👏👏

[@abiyanbagusbaskoro3288]

you just write "attribites" that's means your sd card is ok from begining, correctly "attributes" because if you write wrong word it doesnt work, be smart please even your wanna help people

[@VermillionStallion]

Mine's failed, how and why is that?

[@Thrilz]

did not work for me. I am using a Micro SD card and it still does not work.

[@DroneCameraAction2021]

THANKS DUDE. PERFECT ANSWER. WORKS EVERYTIME. LEGEND

[@ITMagics]

❤️❤️❤️

[@DroneCameraAction2021]

@@ITMagics I do think that salty potatoes cant follow instructions. My sd card has been in my phone reported as unreadable. I put it in the pc and followed your instruction to the letter and bam. Readable, formatted, renamed and fully working. Thanks again.

[@bloosfx0]

i followed the exact instructions and it didnt work once

[@Gary-Seven-and-Isis-in-1968]

Useless, others here on KZbin have posted this "method" without the obvious spelling error and in the case of my SD card, it still doesn't work. Refuses to format and says Write protected.

[@apunkigaming2686]

I will try all process but nothing 🥺 they have show this ( the arguments specified for this command are not valid) please help

[@alovenliquigan9650]

BRO ... YOUR A LEGEND I LUB YOU... THANK YOU ❤️💕❤️😘 IM GONNA SHARE THIS VID

[@ITMagics]

💝

[@dakshalKoli-jf7yl]

ATTRIBUTES DISK CLEAN READONLY ❌ ATTRIBUTES DISK CLEAR READONLY ✅

[@Moviesbooksandgames]

Didn’t work, got through it and still reach ‘unable to complete format’

[@neerajnishad512]

not worked showing attributes disk clean readonly The arguments specified for this command are not valid. For more information on the command type: HELP ATTRIBUTES DISK

[@skrabula83]

not woking. on yours after attributes disk current shows No my yes and after clean read only its show arguments not valid. something occurred my last video on the card.

[@Brunonieuwendijk]

For me "clear readyonly" worked, not "clean readonly"

[@TheHaris556]

mine shows "Current Read-Only State : Yes" and yours it's "No" And after completing the process it didn't work

[@Mukeshsoni-og5uo]

You make fool all of us... your attributes spelling was wrong you do a wrong command the right command is attributes disk clear readonly not clean its "clear" totle time waste...

[@rangsabirthmarakm18]

It does not work with Windows 11? could you give another idea

[@steammausss164]

mine still doest work and i cant do anyting i try to repair and it saids there was an error we coudnt resset

[@akashbalasahebawale2222]

In my san disk 16 gb memory card I'm doing this process but not format my card ... Also saying write protected

[@krishsymphonic6175]

didn't work my bros..

[@FinnArneHansen]

After attributes disk clean read only (enter) I get the warning that the command is illegal

[@markangeloelauria6911]

since i done what you said my SD is not reading in my PC what now?

[@skyler.sahon62]

The arguments specified for this command are not valid. For more information on the command type: HELP ATTRIBUTES DISK

[@akasshhasan7811]

Got the same message on mine. What did u do next ? Did u solve the problem ?

[@newsky2087]

This method fix copy? Cause i cannot copy from card adapter

[@simantoroy9607]

Hey bro how can i remove write protection from my hard drive? Pls make a video about it as fast as u can.

[@Randomsbox]

U are a legend thanks bro it worked

[@ITMagics]

No problem 👍

[@ivancabrera3289]

thanks for the solution but unfortunately for me it did not work still is protected

[@aarongrant1184]

CLEAR* not "attributes disk clean readonly" its clear read only.

[@petrosmvimbimthembu5212]

It can't format it write" window was unable to complete the formatting"

[@fridaelee8088]

All if this didnt work on mine. This is the sixth of the videos I watched to see how I can remove write protected foles in my USB flash drive but still nothing works

[@swathisidduri7574]

thanks for sharing. it's working fine even you type attribite.:)

[@funjourney2416]

Thank you so much for upload this video ❤️❤️

[@carnagekills693]

How do I change “current read only state:No” to “yes”?

[@kr11167]

This method not working same problem at this time try another way sir

[@adityaaggarwal3229]

Does this work on sd card because that not working

[@LXTPHOENIX]

what if it show like this then ? DISKPART> attributes disk Current Read-only State : Yes Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No

[@Endoe.McKronic]

Then you FOOOKED!

[@Lyanazn]

Do i have to use card reader or just usb to connect my sd card with pc?

[@donotsubscribe5226]

Card reader

[@DTD110865]

@@donotsubscribe5226 Maybe that's why it doesn't work so well for me. But then again, I can't add my card reader into the USB drive, because when I do it, the card gets obstructed.

[@Bestusername673]

Wow, it didnt work, nothing will ever stop the mighty sd card...

[@maedehbhm]

You saved me man🙂I was going crazy Thank u

[@10RedditStories01]

GUYS THIS IS CLICKBAIT HE HAS WINDOWS 8 INSTALLED AND GOT AN WINDOWS 7 POPUP!

[@Abhishek_rao980]

Your current read-only state was no so your disk was not write protected

[@ITMagics]

hmm

[@SDADanCars]

Great job Thanks !!

[@sohamadhikari5601]

its been 2 yrs though its damn helpful thanks bro

[@eong9692]

The SD in the first place was in the read only No. It was not protected at all. Therefore, by showing the steps you have gone through definitely it can be formated. The video is useless.