How to repair Diesel Fuel Feed Pump diesel and oil mix problem solved

[@coachgeo]

you happen to have any info on the "nippled fitting" into this lift pump? Am converting to AN6 fittings and really need this to replace all my horrible fuel lines and leaks. (on a horribly done customized conversion yet.... HAS to be my daily driver ASAP)

[@mukhlisengineering2717]

Yes

[@coachgeo]

@@mukhlisengineering2717 look forward to seeing the information you have. Much appreciate in advanced. Needing size and thread pitch.

[@coachgeo]

@@mukhlisengineering2717 other option . considering cutting off the nipple, drill hole and tap it to NPT. Add npt nipple. Assum I must use a nipple long enough that the volume of fuel the altered fitting can hold.. will be same or greater than the volume of the Original non altered fitting. Saying that because I assume the fitting's volume is an intended size . That size being enough volume of fuel held inside its home area to fill the chamber below it completely, when the head of the check valve lowers, to let fuel into the lower chamber. That is also assuming the head of the valve in chamber below fitting seats against the base of that fitting. I have only seen video... not had one apart so I am unsure of that.

[@Shamskhan702]

Nice sir thanks Alot off 👍

[@mzgsm296]

Great job

[@javedbarak5103]

Niceeee

[@Samiullah-sb9du]

Nice

[@stefanoancona7642]

Da come ha messo la pompetta in morsa ,non e'un professionista ,ma improvvisato ,spiacente