How to Repair Holes and Cracks with RapidSteel Epoxy Putty

[@ZHILINLYU]

It is a interesting material. And i want to know how the mechanical behavior it is. Like tensile strength , compressive strength and bond strength.

[@shukrimahmood]

Thanks for introducing this "magic thing". I didn't know about the existence of such a thing. The only thing I would have used is the two tubes mixture of epoxy... Many thanks with my best wishes.

[@JacquesAlouan]

Hi, does this material rust, and can it be polished to a high sheen?

[@rockmountwelding]

Great question! There are steel particles that have the potential to rust. It also likely will not achieve a high sheen using polish. It would look more like a shiny gray instead of polished steel.

[@REALLYRANDOMREVIEW5]

i have a tube but would it be strong enough to hold a bolt the bolt eye has snapped im wndering if this could be a temp fix rather than welding or new parts thanks

[@rockmountwelding]

Thanks for asking! This is an interesting case. We would need more information to give a solid recommendation. Shoot us an email at [e-mail]. We'll can chat over the technical side further and help figure out the best solution from there!

[@TXF9a]

Does this adhere well to aluminum? I have a hole in an aluminum PC case which I want to fill.

[@rockmountwelding]

@TXF9a while this isn't a typical application for rapidsteel, it shouldn't have an issue adhering to the aluminum. We would love to hear how it goes!

[@TLCOXOX]

the beer can is aluminum

[@fr3dr02]

I have some here just wondering is it ok to chew like gum in order to mix? Cause I tried now I have rapid steel teeth 😮

[@yourvault1612]

I can’t find it on your website

[@rockmountwelding]

Thanks for the heads up. We’ll get it back online and let you know!

[@yourvault1612]

@@rockmountweldingI see it now! Thanks!

[@rosemcbirney5123]

Can I use this on my oxidised neck on water pump I cleaned all the oxidisation off and there’s pitting can I use this to make a smooth surface again to take the radiator hose

[@MarkWilson-RockmountTech]

Thanks for the question! Mark from Rockmount here. As long as the neck is clean it should work great for that repair! It will fill in the pitting nicely.

[@blakemiller9515]

Will it hold in an oven for powerd

[@rockmountwelding]

Hi @blakemiller9515! Thank you for your question. What type of oven are we talking about and what temperature does it need to withstand? Is there A specific part you need to repair? We can make a recommendation based on what information you can provide.

[@bigkingsha]

I was panicking, because I was worried the beer would go flat before he drank it!

[@Slcsaltcitysteel]

Will it stick to aluminum?

[@donaldbeard6231]

Ever considered a 12 step program 😂