How to repair inflatable endcone leak.

[@mondango21]

Thank You for sharing, have always wondered how those things are done, very interesting.

[@bobpino3251]

Thanks Alfred. Just what the doctor order.

[@RolloUnden]

Thank you so much for your video you just saved me several thousand pounds and an 8 month wait list.

[@andysimonik6937]

Nice job, please can i ask what is name of that glue?

[@katherineburkey5160]

Great video hopefully we will never have to do that ourselves. Thank you Wally for fixing the boo boo on our tube, I can’t wait for it to get here. So very great full that’s all that’s wrong with it. It’s a good little use tube. 🙏✌️

[@jaidenkalel1312]

Pro trick : watch movies at flixzone. Me and my gf have been using them for watching a lot of movies lately.

[@tatumleonidas1444]

@Jaiden Kalel Yea, been watching on Flixzone} for months myself :)

[@FishingwithCristina]

I really enjoy watching your videos thank you for sharing I really do appreciate it.

[@onemantwohands5224]

You guys are teaching me ❤

[@righteousriverfishinginoregon7]

I wish I saw this video yesterday before I attempted the same repair. I did not sand, so I hope it holds.

[@adew4u2enjoy]

Nice job. Good video, simple quick and done. Quick question if I may. I just bought a porta-bote with a rip in the rear bladder,(rear transom). It is more plastic feeling and smooth. But flexible like rubber. The manufacturer said I "might" be able to use a polypropylene tape. Will the Orca glue with some of the pvc inflatable boat material glued over it work do you guys think? Or what would you guys suggest? I am having a bear of a time trying to find a solution online.

[@ehabmourad2326]

Please, can you send the name of the glue, how to use it, and the company that manufactured the glue?

[@charliedougan1459]

Dude! Good job. What type of heat gun?

[@njseashorechas2698]

What was the name of the glue you used? You guys rock!

[@poppetrurazvan3900]

Thank you very much!

[@jamesmccaughan4243]

What's the name of the glue your using?

[@TheMaxRealEstateGroup]

Hi Alfred Great clip. I wanted to know if can tell me where I can get the adhesive similar to what you use my boys raft happened to a hole.

[@tommymorrison422]

What’s up Alfred Tommy live in Boston I can get a trailer with a 10ft west marine hard bottom for 400 but needs reglued one side by transom what you think looks new

[@UrbanFisherman]

Great job!!! 😎😎😎

[@richiesquest3283]

Nice job what is the name of that tool your using .

[@peter2023]

What glue can i use to glue the transome rubber ears to the pvc zodiac ? Thank you

[@H_B_G.]

Que pegamento usaron??gracias

[@peteramberley9952]

Excellent vid very helpfull

[@dan2soy191]

Hi Mr montaner, how much would you charge to make inflatable for GRAND G580FL model? Do you charge per foot on making inflatables or what? Thanks!

[@AlfredMontaner]

Email me [e-mail]

[@SouthernSierra56]

I usually stick down 1st then heat through the material.

[@nikkithornton2292]

what glue

[@srgcfgroup5929]

Please tell me this paste fabric (gum name please) you are not sealing by hot air machine I'm right and please tell about this paste name please sir???

[@benhechter2929]

great video - thanks!

[@barry3235]

What glue did you use?

[@balkman_4]

I got a hole in my hypalon dinghy at the edge of the rubrail so it is on the seam where the rubrail stops going up the side of the boat and I was wondering if I should patch over the rubrail or if I should take the rubrail off, patch it then put the rubrail back on. If I was to take the rubrail off how would I do so?

[@petermoyes8766]

hi alfred once again i need your advice ,i have a 10ft brig rib f300 i want to put transom wheels on it but the hull inside this rib has just a narrow area to bolt on to ,i am worried the wheels will be to close together ,if i remove the davit hook ups i can make it abit wider ,,just cant handle this ribs weight i am 72 lol.do you suggest a good wheel desighn ......love your show respect your knowledge

[@AlfredMontaner]

Peter you might have to compromise something I don't come across these situations often so I can't really help much. But I do believe that you might have to give up something to get something.so if you have to remove something so that you can install the wheels you want then that what you may have to do. Sometimes there is kayak wheels that people use on dinghies also check those out

[@georgegoldenberg986]

Hi Peter, please see wheels #5 on bcimport.com/launching-wheels.html should be feet to 10f RIB

[@UTDAsia]

What is the tool you use to push the material together?

[@shawngonzales5080]

How much to make a tube for a 11 foot aquapro center console tender? It's a 2001 model .

[@stevenwhittington7085]

Does this work on PVC dingy?

[@peterwilson5528]

Nice job :)

[@amarobarcosboat]

Top bote inflavel, perfeito

[@marcinmakowsky5756]

Hey Alfred, what brand of glue do you use? Best

[@AlfredMontaner]

We use Orca glue

[@marcinmakowsky5756]

+Alfred Montaner model?

[@AlfredMontaner]

Its the Orca glue that used for hypalon

[@marcinmakowsky5756]

@@AlfredMontaner the last question :). For PVC glue?

[@AlfredMontaner]

You can probably use some Clifton's

[@FishingwithCristina]

LOL I'm trying to learn someone gave me one and it has a slow leak and I can't find it.

[@jarnoc1191]

I have a inflateble boat. 1 air chamber is slowly emptying and I can not find a leak. Do you know what i can do?

[@AlfredMontaner]

Inflate it fully until it's hard them put soapy water over the entire tube. Any areas that leak with bubble up. Also open the valve covers and put soapy water on the valves and see if those are leaking

[@jarnoc1191]

Alfred Montaner thx! I’m going to try it

[@benhechter2929]

@@AlfredMontaner Thanks for being so kind and helpful!

[@norcaloutdoor5462]

How long the glue will last with normal use?

[@AlfredMontaner]

10 years

[@norcaloutdoor5462]

@@AlfredMontaner and How long the HYPALON Fabric will last? Thank you for the information.

[@AlfredMontaner]

@@norcaloutdoor5462 more than 10 years

[@mayerflyer7361]

😂😂 parece que la va a romper al final del video

[@walterbattaglia4395]

bene bravo

[@suwirwong]

I still cant understand why people still getting inflatable?? Everywhere i see is puncture, tear,leaks and stuff, please enlighten me, i mean its not cheap, it seem not as durable as regular alumunium, hdpe,or even fiberglass

[@zzz7zzz9]

you'd understand if you owned one. they are literally the safest feeling boat on the water. i've had many arguments with friends, who just don't believe it. i've even had people try to tell me that jon boats are safer. i've been in a jon boat, and it was the LEAST safe feeling boat i have EVER been in. there's a reason that police, coast guard, search and rescue, etc, use inflatables.

[@wallacegrommet9343]

Higher weight capacity for a given length, almost unsinkable

[@donaldrussell8866]

We call that a cone end

[@Lilmanlightz]

I alway fill my pool toys with water incase tgere is leak

[@MiguelPena-y2y]

Hola, necesito el número de teléfono

[@ehabmourad2326]

Please, can you send the name of the glue, how to use it, and the company that manufactured the glue?

[@AlfredMontaner]

Orca glue

[@harrietsnowball4981]

@@AlfredMontaner is it a one or two part glue