How to repair K-rend Rendering (monocouche rendering)

By Dan and Kris Smith
Working in Guildford, Surrey and all surrounding areas.
To arrange a free survey, please fill out the Rapid Response customer form by clicking the link and we will get back to you within 24 hours.
Please upload a short video of your job. This will help speed up the quoting process.
form.123formbuilder.com/65628...
Kind Regards.
Dan.
Daniel Lee Plastering & Rendering Ltd. Trading as Guildford Polished Plastering
Smoothing Your Way To The Future
www.bestgpp.com
#plastering #rendering #Diy #redecorating #renovating #diyprep #plasteringprepartion #danielleeplastering #guildfordpolishedplastering #guildfordplastering #plasteringguru #Danielleesmith #dotanddab #plasterboard #danielleerendering

[@CEO786]

Great job Danny boy ❤

[@coxy1984]

Fantastic job Daniel. Being a plasterer myself I know that patching K rend isn't easy.

[@DanLee40]

Thank you very much 👍🏼

[@rockroll456]

Brilliant guys💪🏻👍🔥

[@Joe-jv5mm]

Tasty job

[@DanLee40]

Thanks a lot

[@phils3631]

Nice bit of patching 👌

[@DanLee40]

I appreciate that, all we can do is try our best. 👍🏼

[@lonehoot1566]

Great job,what primer did you use?

[@DanLee40]

Thank you very much. We used Universal Primer from EWI. It can be used to prime all types of render except breathable lime renders. It’s very good stuff. The link is below. ewistore.co.uk/shop/external-wall-insulation/universal-primer-ewi-310-20kg/

[@leegorman3329]

isn’t krend classed as a breathable render?

[@DanLee40]

K-rend does have breathable qualities however it is not very breathable (compared to lime render) and certainly not suitable for heritage work or single skin buildings . Lime render is much more breathable and would be used for single skin buildings normally

[@user-fw6pi2mu5z]

Why didn't you take patch at side of garage down to the joint

[@jameshawe]

Brilliant job pal 👏🏻👏🏻👏🏻 what floor protection do you use

[@DanLee40]

Thanks really kind of you to say. We use a variety of different types of floor protection’s depending on the ground. On this occasion we used a large thick sheet of polyurethane then we taped some new tarpaulins over for extra protection.

[@jameshawe]

@@DanLee40 cheers pal 👍🏻👍🏻

[@dannys7795]

no showing the tool you used to draw the lines in then?

[@DanLee40]

We used a string line to make sure the line matched up both sides then used a spirt level and a margin trowel the exact size of the line. I hope that helps 👍🏼

[@Trowel1892]

Great job top job pal

[@DanLee40]

👍🏼Thank you very much

[@AUranus_urmom]

It's a totally different colour

[@u2kjib4cjkqn]

Nearly impossible to Mach the colour as it depends on drying time .

[@articlered2334]

Takes months to dry out as well