How to Repair Miele Dishwasher with F24 Error Code

In this episode we show you how we replaced a heater relay on a Miele dishwasher Model G 4203SC after getting the fault code F24.
If you attempt to do this, be careful. Ensure the power and water are turned off before commencing any work.
We purchased the new heater relay/PCB from Statewide Appliance Spares. Part Number: 09053390. This was not sponsored, but we were really happy with the purchase.
Thanks for watching and if you want to support the channel, please like and subscribe.
#MieleDishwasher #ErrorF24 #MieleRepair

[@rockylincoln8418]

Thanks mate for a very informative, easy to understand video. Ordered the part online here in Australia, got it for $130, popped it as you directed and we are back in business. Massive thanks again, last callout cost me $450, part and labour.

[@edwardandgauriholloway4351]

Hi thanks for your video. We owe you a beer. The dishwasher stopped working Christmas week, couldn’t get a service person until 2nd week of Jan. It was great to be able to call statewide with a part number, they had it in stock and picked it up the same day. The replacement went smoothly and we are up and running again. Cheers!!

[@hwangdenny2575]

Thanks a lot. I had my dishwasher fixed immediately after watching this video. Got the relay from eBay with $120 plus postage.

[@stjezzer]

Thanks so much for this! Love the Aussie can-do attitude :-) I located the relay board on my dishwasher as per your video, and discovered the blade contacts were corroded. I managed to clean them up carefully with a small file, and bingo, dishwasher is working again. Very grateful!

[@countrylifeonthecoast4167]

Fantastic! Glad the video helped and well done on your fix!

[@killablooz]

Very helpful. Thanks mate

[@markradford6856]

Thank you. Changed the Relay. Working well so far. Mark (Electrician)

[@tchavdartodorov5613]

Thanks! The video helped me a lot by guiding me where to look for the problem. Instead of buying a new relay, I cleaned its terminals and reinstalled it. The dishwasher works like new ;)

[@gb9987]

Fantastic vid thanks - just one for the fellow home handyman - the screws are a torx type head

[@55Staffan]

Thanks a lot for a valuable demonstration

[@cwoble]

thank you was able to fix my dishwasher greetings from Belgium

[@jonathankanat6970]

Thank you. Gave the relay a tap and removed /refit contacts and now working normally.

[@countrylifeonthecoast4167]

Nice work!

[@Gcorev]

Thank you! Saved me a lot of time and effort!

[@sheepfilms]

Thanks for the video, I had this error and your steps helped me fix it easily!

[@JMidasz]

Great video thank you!

[@user-xf8to3oc3v]

Thanks - Very useful!

[@Unbreakable_user]

Merci pour ton aide 👍

[@acobraco9027]

Fixing error F24 - Just disconnect the dishwasher power cord from the power point overnight and reconnect next day. Start the dishwasher and Voilà :) Worked for us 7-8 times.

[@countrylifeonthecoast4167]

This is the best fix I have heard of, great job! I had done that once or twice with ours, but then the F24 code wouldn't go away.

[@sunnyxroblox0]

Just had the error message wouldn't work at all turned it off at the PowerPoint turn it back on again working a treat

[@ryanmckay9773]

Thank you !

[@joannarichardson3696]

Thank you so much, fixed!! Noosa electric had the part so fixed in 24 hours 😁😁😁😁😁😁

[@countrylifeonthecoast4167]

Great to hear! Good to support local businesses too!

[@fiatfuzzi3083]

Verry good video. Thank you verry mach.

[@agwoml]

Our machine has a leakage somewhere (F70 i think), we got rid of that but a few drops of water managed to leak into the relai. We took it apart and dried it but that didn't do the trick, so we're waiting till tomorrow. Hope it works. Thank you for the video👍

[@funnysupergau7417]

Thank for that, I'll try that later

[@ericchevalier2747]

Thanks !!!!😊

[@MatthewTyler_life]

Helpful! And not one single curse word during the repairs, and with a smile. I have not begun the repair, we got flooded and hoping the relay is just wet and not fried. Update: after airing out for 24 hours the F24 error did not come up, thankfully!

[@whodat9198]

I thought Miele claimed to have double leak protection. How did it flood??

[@fandomTarantinoandCo]

Thanks for video! And for cat :)

[@mattwarner8273]

just fixed mine, was as easy as it is in this video, for 2 of the side screws I needed to take the 2 legs off first as I did not have a ratchet.

[@abdulkhadar_sa]

Hi, Thanks for the video. Do you know where to find heat relay component for G1272 SCVI dishwasher. i too have F24 error seens from last two days. Thanks

[@BugWalk]

Thank you very much. I replaced the part. Now when I switch on the error does not appear. When it stops filling the water it blows the main fuse of the house. Is it the heater now, what do you think?

[@frankvosnidis8216]

Legend

[@papuas5]

Спасибо друг, помог!!!

[@PomFrit-tl1xv]

Top vid Sean - tomorrow's Saturday morning job for me. Already got local Meile page open on the replacement relay part, if I need to order a new one. Some interesting previous replies in respect of turn it off for 24hrs or tap the relay...interesting to see if that works, or whether its delaying the inevitable replacement of the relay. All The Best, G

[@countrylifeonthecoast4167]

Hope it went well! The relays are normally what needs to be replaced or repaired. Turning it off for a short period of time can work but in my experience, not for very long.

[@tomorrowsTomorrow]

@@countrylifeonthecoast4167 Have to say Miele dishwasher is rubbish tbh - relay switch problem for my third / fourth time now Anyone recommend a better make - thanks

[@user-ps6ms3cx8q]

Thank you! Service tech said cockroaches in the electrics and the dishwasher wasn’t worth fixing. I cleaned the circuit board of cockroaches poop and bingo it’s working again!

[@robertmillar2037]

Hi mate this is very helpful. I had a f14 code which has morphed into an f24 code. Have you ever seen this where the f24 code follows the f14 code?

[@countrylifeonthecoast4167]

No, sorry

[@tschuuuls486]

Just fixed mine, this can be caused if the heater relais coil is open or unplugged. Also worth to check the pressure transducer on the main pump, they may start to leak water and create a resistance between the middle and one of the outer pins.

[@user-wy4ui2tp7j]

I already changed relay but dish washer stopped again having error code F24.

[@cushieaudio]

thanks for pointing us to it. the relay's are no different to ones I have laying around! Also the flow sensor that I paid over $200 for is only a magnetic reed switch that are under $2!!! not a year out of warranty it is a disgrace. my chinese machine before it never cost a cent in repairs. Miele don't even care

[@asafblasbergvideographer]

I have the same issue - sometimes I get the error message and sometimes I don't.

[@fantaliaau3172]

I have this problem on mine. The fact that it only happens on rainy days made me think it's a moisture related problem. So far my fix has been to run a heater fan to blow hot air under and around the dishwasher for an hour or so then F24 goes away. When this trick stops working, I'll try replacing the relay. Problem also started after 12months. I hate how you can't even buy extended warranty from HN or GG - good dishwasher but horrible warranty.

[@countrylifeonthecoast4167]

Yes, I hear you. The dishwasher works well, but we shouldn't have these issues anyway. E

[@alliao82]

probably a good idea to seal the relay with some desiccant in a ziplock bag or something, that thing's designed to catch every bit of splatter raining down from the top and error out so miele can collect their tax

[@mariannehorne7017]

Where did you order the part please We are not handy but Miele want $400 to fix so better to try this

[@countrylifeonthecoast4167]

Hi Marianne, Sorry I meant to put that in the video description. We bought it from Statewide Appliance Spares, it was Part Number: 09053390. Hope that helps. Kind regards Shaun

[@bhudson39]

F24 error. Ran dishwasher using "Energy save" mode instead. I guess it doesn't use the heater. Problem solved, short term at least. 🙂

[@acobraco9027]

Fixing error F24 - Just disconnect the dishwasher power cord from the power point overnight and reconnect next day. Start the dishwasher and Voilà :) Worked for us 7-8 times.

[@bhudson39]

@@acobraco9027 Thanks. Will try that!!

[@bhudson39]

@@acobraco9027We have an F12 error now. I have switched off for 10 minutes, but not overnight. 🙂

[@fluffycandyfloss2740]

So I changed the heater relay but I am still getting F24 error. What now

[@Videos_of_random_things]

Just tried this repair, and the error still comes up :-( The element circuit was fine (near 0 Ohms), so changed the relay part for ~$170 Still get the F24 error on a Miele G6100. Wife is unhappy, please help!

[@fs8976]

near 0 Ohm is not the value he is showing. and this dont make sense... you should measure sth the 20-30 Ohms

[@bannedsays]

L'errore F24 può essere causato anche dall'eccessiva umidità nell'aria.

[@alfaepsilon1]

confermo. Me ne sono accorto quando ho cominciato a montare pressostati e relays vecchi :-( , compreso il primo cambiato da Miele ufficiale. Tu hai esperienza di Miele? Ho un nuovo problema che non trovo codificato

[@fs8976]

repair the relais board: kzbin.info/www/bejne/oXuuZZeBhdKHaZY

[@paulhartman7426]

Mieke sc 1222 demonteren

[@nicofish3100]

Go to Jacar get your own relays .and make up a new board ......BETTER THAN THIS MIELE CRAP!!!!

[@countrylifeonthecoast4167]

Thanks for the comment. I agree replacing the relays would be a great way to do it. Can you advise what model relays to get from Jaycar to help others?

[@johnleo6201]

Mine was a lemon. $2300 dishwasher lasted barely 5 years. The drain motor wouldn’t stop running. Replaced non return valve. Wasn’t the issue. Took out the drain pan. Bone dry. Replaced floater switch. Nope. Opened the controller board - bingo. The board burned out the plug (the 7 connector plug) connected to my drain motor. The motor refused to stop draining. Paid Miele $300 only for them to tell me it’s cost another $1200 to fix. Are you for reals??? They blamed me for user error. What the what??? How on earth do I burn out the controller board? Don’t buy Miele. They claim they have such great reliability but mine didn’t last 5 years. Trash. I threw out that $2300 paper weight and bought an LG.

[@trf9463]

I hope you get spar parts after 2 years from LG. Regards, Tony

[@johnleo6201]

@@trf9463 The brand new LG dishwasher I bought cost $990. The main board part that Miele wanted to repair my 5 year old washer was $770. Labor, sweat, stress, tears not included. If Miele is going to charge nearly as much as a brand new dishwasher for a part, then it really doesn’t matter if they provide parts for years, does it? Cheers.

[@terencecooke3531]

@@johnleo6201 MY MIELE IS 30 YEARS OLD, AND WORKS LIKE A CHARM IT HAS NEVER CAUSED ANY PROBLEMS

[@Susan70003]

@@terencecooke3531 Tell us your model/serial number so I can look for a used one. You never know when someone remodels and they will give them away. tia