How to replace a clutch assembly on a STIHL 261 chainsaw

[@JohnWoodbury-xk2cb]

For the most part good information. However, two problems should be addressed. At 5:35 in the video Chief says, “Oh, cool little wire here keeps that from falling out”. The so called little wire is part of the mechanism that drives the oil pump which provides oil for the bar and chain. The second problem is related to the first problem at 8:33 Chief slaps the sprocket drum on the clutch. When you look at the rim on the backside of the sprocket drum you notice a little notch on the edge of the rim. This notch needs to be placed on top of the so called little wire mentioned at 5:35 in the video. A flash light can be helpful to assure alignment when seating the drum in place. When properly reassembled the oil pump works as the clutch engages the sprocket drum hence pumping oil to the bar and chain only when the chain is turning. Hope this provides insight and clarification to any novice backyard mechanics.

[@daniel_xxdannyxx7344]

thanks for the info

[@BelenJimenez-m7u]

Thanks for this tip , I was struggling for the last 2.5 hours , and with this rope trick did it on the first try . Thanks !

[@fyidelis]

How did u loosen the high tension connector to see inside the piston thing? Does it just disconnect cuz I feel like I’m gonna break mine????

[@erikramosandmelody8774]

Why not grease the clutch bearing? I always do wd40 cleans it but grease keeps dirt out while rolling

[@danielpadgett2831]

At bdc with the rope you take a chance on the rope getting caught in the exhaust port wouldn't you? I always make sure I'm past the exhaust port myself

[@doug9793]

Ur 100% right

[@kevinkollman9162]

Grease the bearing in the clutch, the wire has to be lined up with the clutch housing to make the oil pump work. Otherwise good show//

[@shanehamilton9366]

Use an impact

[@oldaz.5094]

Perfect work 👍

[@VickiAnkney]

Lack of up keep.The owner of the saw has no business owning a chainsaw.