How to Replace a Lavazza Espresso Point Button Board

www.ice-dr.com
This video shows the diagnosis and replacement of a defective Lavazza Espresso Point button panel.
For parts, repairs and maintenance, send us an email at [e-mail]

[@mxxmikexx1]

Buttons can sometimes not work because of the connectors on the ribbon cable having a bad connection. My buttons started working again by simply unplugging the ribbon cable from the keypad going to the main control board and plugging it back in. Fixed my 2 buttons that weren't working. Hope this helps someone! These machines are very old now and sometimes they just need the ol' Fonzie touch of a good swift slap

[@stephensteinheimer7962]

The "medium button" didn't work because once you insert the capsule, it triggers the switch and will allow you to choose any of the brewing options.. however, you pressed the hot water button... The hot water and the steam function will work without inserting a capsule, but the other 4 buttons will only work after a capsule is inserted and no other button is pressed before whichever length you choose... The keypad for this machine in the video was working perfectly fine.

[@zilla8232]

This is the correct answer.

[@mertmertcik7879]

Hey can i See where ich must put the two cabke of the Button in the Motherboard. There is 2 pins too many? Thx

[@blkonblk17]

Hi, is this machine worth purchasing used in 2020 for $200? Thanks

[@joselatorre8140]

Hi, I have a brewer just like that one and it won’t turn on, do you know what do I need to turn it back on

[@rayorosz4350]

Did you check the two fuses right next to the a/c cable jack in the machine?

[@Sorted6996]

Hi there, where did you order a new button board from? Cheers for the vid!

[@IceDrChicago]

I have the button panels in stock. They cost $45.00 plus shipping. If you would like one send an email to [e-mail]

[@clabruno]

@@IceDrChicago are you still selling these button boards?

[@clabruno]

I have sent you few emails looking to but this part and no response?

[@shtfool]

My Lavazza makes noise but no water. Probably a pump, where can I buy one to replace? Thank you.

[@damarisvaldez6514]

chris russo Did you get your machine to work? Mine does the same just noise no water

[@andysung1026]

What can I do if he water button is flashing despite water in the bucket?

[@golfgeorge1500]

the floater holder in your water tank is broken. So the machine is thinking there is no water inside. Check this out.