So glad I found this video. I started leaking oil bad by CCV, then a lot of drivers on trucker report said that oftentimes it is only the gasket when Volvo tries to get you to buy the whole CCV which is $400-$500. I went to Volvo and bought that same square gasket from Volvo for $17. Now I just need to figure out these hard starts I have and the mysterious cold coolant leak.
@Ed-or6mp4 жыл бұрын
Bro im having the same issues its like i wrote this comment
@8526Productions4 жыл бұрын
Robert Payton on the coolant leak I had when sitting and leaking like a stuck pig I pressure tested it and couldn’t see anything. Used dye and was able to find a pin hole crack in the radiator on one and a failing water pump on the other. And as far as hard starts I’ve seen everything from an open primer push button that was sucking in air to cracked injector cups. If you could give specifics I may be able to help you. I have 32 of these Volvo’s and anything that can go wrong has
@RobTheSuave4 жыл бұрын
8526 Productions Hi. I fixed the oil separator leak by replacing square plastic gasket between it and engine. As far as the leaks go with coolant, I may have found the issue with that, as well. The hard start surprisingly hasn’t happened much, but I have found a local mechanic who handles fleets of trucks and does work on mine on the side, and he cleaned the fuel lines, so hopefully that was part of the issue. It might also be kill switch on batteries or ignition switch, loose wire etc. But it has worked fine outside of trying to start in freezing weather after sitting a weekend.
@RobTheSuave4 жыл бұрын
Edo Ahmetovic you ever get it fixed? I did. Simple $17 square plastic gasket from Volvo.
@mortalocean42965 жыл бұрын
Thanks for sharing. Great info great vid keep them coming
@ralphdifabiojr79124 жыл бұрын
anther issue that filter he is working on recycles the oil that it catches and puts it back in the oil pan so all that gum cutter that he is loading up inside that filter will end up in the pan
@ogbuagusinclair73103 жыл бұрын
That's a great work i like that am learning every day thanks man
@MrFrancis2trans3 жыл бұрын
what cleaning solution did you use???
@mjyouletstalk.67244 жыл бұрын
Thank you sir for sharing great 👍🏼 videos
@berniesands62013 жыл бұрын
Did that help at all? I ask because that broken gasket doesn't explain how it got all of that oil in it in the first place all that oil came from the blowby tube.
@ralphdifabiojr79124 жыл бұрын
I would throw one of my guys out of my shop if i saw them using a claw hammer to loosen parts on an engine.
@twistedtrucker77813 жыл бұрын
Yeah that was a pack your crap and get out moment,then that upper housing has a filter in it that should of been change too you rember the one that's full of brake cleaner when he sprayed it into the hose hole???? Lol WOW.
@gopabains29695 жыл бұрын
Good information thanks
@johnshort88 Жыл бұрын
I can't believe you took a hammer was beating on the mating surface!
@floriniancau57663 жыл бұрын
question: if the bearing is broken, is there a way to change him? Thank you!
@8526Productions3 жыл бұрын
It will disassemble yes
@nramroop794 жыл бұрын
Bud how long will it last after cleaning it ..
@8526Productions4 жыл бұрын
not very long, to be honest if you go through all the trouble you might as well replace it.
@22jeepmojave752 жыл бұрын
Do I need to replace whole unit or can I just cleaned and replaced because I’ve the same problems and it cost $1100
@8526Productions2 жыл бұрын
More then likely you just need to replace the gasket, however without seeing I’m not sure. But it is deff cheaper to replace the gasket first
@Dillionp944 жыл бұрын
Was the oil coming out the blow by tube?
@8526Productions4 жыл бұрын
RealAmericanGaming there and where it mounts will be caked in oil
@Dillionp944 жыл бұрын
I ask because I had a real bad oil out the blowby with no loss of power. This is what we figured it out to be
@stargate78412 жыл бұрын
Never ever use metal brush on aluminium parts, specially on gasket seats….
@nramroop794 жыл бұрын
My volvo got 600k mile I bought it with 430k and never change it ..
@8526Productions4 жыл бұрын
nigel ramroop it really just depends, I’ve replaced about 7 so far this year on different trucks but it’s always that gasket that fails. You’ll know if you look on drivers side and it’s a good bit of oil around it
@gutierrezgorila4 жыл бұрын
Another one leaving chemicals on the floor. Then they get cancer and complaint