HOW TO REPLACE A WATER PUMP ON ANY AUDI RS3 OR TTRS!

[@lukebaldan]

You absolute legend Hayden. Just successfully completed a water pump replacement on my RS3 following your video. Thank you for putting this content together, you have saved me a lot of money and time.

[@Haydenschreiermk2]

I’m so very glad I could help! I really wanted this video to be more than just content. I wanted it to be a step by step guide to help someone with the same problem! So I’m glad it helped!!!!!!

[@johnj1763]

Please make more rs3 videos, very few out there. Appreciate it, subscribed.

[@Haydenschreiermk2]

any suggestions?

[@derekmartz4320]

Just want to say "THANK YOU" for making this video. The video and information re spot on. Just finished my water pump swap on my 2018 TTRS and the process went just like your video! I even went and bought the $10 kit at Walmart. LOL Definitely straight forward and lots of steps, but not technically difficult. 10/10 and ⭐⭐⭐⭐ stars! for your video of swapping water pump and nothing left out.

[@Haydenschreiermk2]

Dude this means a lot! I’m so glad I was able to help you! That $10 kit HELPS!!!! I wish I had a swivel or flex head 1/4 inch ratchet. Probably would have made the process a lot easier! Did the Walmart kit work for you? And I tried to be as HOW TO as possible! I was looking for a video like this when I wanted to do my water pump couldn’t find any so I decided to make one.

[@mohlomphehi]

YOu sir are doing the Lord's work. Subbed. I hope you still have the car and will be dropping more video's in the RS3 playlist.

[@Jamal.89]

😅😅😅😅I feel your pain because I replaced the water pump in a 2018 Honda Civic LX. I added a 3 minute video and used several for tight spaces.🔥

[@BrianWalker-w7o]

Good job, Hayden. Not straight forward or easy, but very fiddly. Very informative and helpful. Well done.

[@Haydenschreiermk2]

Thank you!

[@acpck]

Thank you so much for posting this up! Much alike that torx from Wallmart was a life saver, your video is a gem for those of us that like to DIY the maintance on those cars. Also, that cardboard bolt planner thingy is quite nify; first time I'm seing this king of approach and I find it really smart and simple.

[@Haydenschreiermk2]

wow! thank you for all the compliments, i appreciate it!

[@raabycraab]

Very good snd informative video !

[@Haydenschreiermk2]

Thank you!

[@BENJAMIN_TTRS]

Great video. Think I might leave the job for an Audi specialist for when my time comes

[@Haydenschreiermk2]

Yeah def avoid the dealer it’s about half the price at an Audi specialist. But if you’re willing to do the work, you’ll get all the tools you see in the video pretty much free. Thats the trade off

[@BENJAMIN_TTRS]

@@Haydenschreiermk2 Completely understand, my worst thought is if the engine drops to the floor then I'm in an even worse situation. Great job though. you must be well chuffed with yourself now its complete.

[@Haydenschreiermk2]

@@BENJAMIN_TTRS yes I’m ecstatic! Not only can you do this with jacks you can also use an engine hoist that mounts on top of the engine bay. $80 at harbor freight. You can also put wood or a jack stand as a safety. In case it drops!

[@BENJAMIN_TTRS]

@@Haydenschreiermk2 Very true. I based in the UK, but I’m sure they have something similar for sale over here. Will have to take a look.

[@TheAustrum15]

Hey I used this video to replace the coolant pump my 2019 TTRS by myself. You saved me a lot of money, thank you!

[@Haydenschreiermk2]

thats why i made it! to help others save money! glad it worked out for you!

[@Coopjab]

With all of this work you might as well get upgraded mounts and a new dogbone. This is definitely a helpful and in depth video.

[@Haydenschreiermk2]

Haha if I did the dogbone mount I’d have to loosen the subframe. From the videos I’ve seen upgraded mounts are a lot stiffer and you’ll feel the engine at idle and when driving. Lots of vibration

[@davej.6290]

Engine and gearbox mounts are not necessary unless they are worn. Dogbone mount is highly recommended, but no need to change the whole mount. You can get inserts which fit from top and bottom to fill the open spots in the oem mount. Therefor you don't need to drop the subframe.

[@BENJAMIN_TTRS]

@@Haydenschreiermk2 I have the racingline doggone mount inserts installed on my MK3 TTRS. The increase in NVH is hardly noticeable. Only very slight increase in NVH and only noticeable if trying to look for it. I've also installed their propshaft bearing alignment kit as well.

[@Haydenschreiermk2]

@@BENJAMIN_TTRS did you just replace the insert or did you remove the circular bushing in the subframe? Is their much difference just replacing the dogbone mount shaft?

[@derekmartz4320]

Unitronic or old ECE dog bone mounts are minimal NVH but definitely tighten things up when running a tuned car. Worth the cost, plus very minimal NVH. Also, 034 subframe sub frame collar mounts and rear sub frame mounts do stiffen car up some more without taking comfort from the car. They really help when cornering...just a bit tighter. A rear 034 sway bar helps with our cars understeer, but be careful to tight can make car oversteer a bit in some cases. I own a TTRS and those items definitely helped when running Stage 1+ e85 tune. Funny I watched video and below my water pump area it looks just like yours. Time to swap my water pump...nice video!! Keep going......

[@derrickgarcia303]

Gotta love German Engineering! Thanks for sharing.

[@Haydenschreiermk2]

My pleasure!

[@nelsonsantana6778]

ty for this. i currently have the same problem but at 45k miles. If only pump had gone out when i upgraded to 034 mounts a while back.. it probably would have saved me having to take them off twice lmao. thanks for the pump link also because everywhere i had looked they were between 700-800$ for a rs3 pump.

[@Haydenschreiermk2]

You are very welcome! I couldn’t find a good video for the FL rs3 so I decided I’d make one. Yeah def would have saved a little time. Remember you need new hardware. The local Audi wanted $1200 for me, everywhere online is $700+ lol. This guy I met in a FB group has a link on eBay for the pump so it’s legit. He sells a ton on eBay and it’s a NEW superseded pump, like the “revised” pump. (New part number) which should mean Audi fixed the previous versions problem.

[@BENJAMIN_TTRS]

@@Haydenschreiermk2 What year is your RS3?

[@Haydenschreiermk2]

@@BENJAMIN_TTRSlook at the title of the video🤪

[@MarkSchreierLongIslandRealtor]

Very informative labor intensive job, well done…

[@Haydenschreiermk2]

Glad it’s over with!

[@jeanfrancoismenard705]

Good job it seems you study everything before doing the job. That's smart. For your torx bit it exists every kind of length and size on 1/4 and 3/8 drive a good kit of those and a kit of triple square are needed on any job on VAG car !

[@Haydenschreiermk2]

I try to, don’t wanna go into a project blind. I think I need to add a swivel/flex head 1/4 inch ratchet to the collection. Some how didn’t have to use a triple square for this project, although funny enough I bought a shallow head set just in case.

[@ajeetm]

Thanks so much for sharing your pain and success! Mine is leaking at 42K, and your video has convinced me to have a shop take care of it :)

[@Haydenschreiermk2]

LMFAO that was funny somehow i thought you were going to say you were going to give it a try. i have the tools, so it made sense for me to try it myself. but if you give it a go you could pretty much purchase all the tools i have in the video, keep them for life and still save money vs having a shop do it! But i agree its no easy task

[@user-yc7zb4cj4x]

How much did they charge

[@brianbove4413]

Great video. Any updated links to the water pump you purchased?

[@Haydenschreiermk2]

this should be alright www.ebay.com/itm/176575410483?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ULugTzoeSeO&sssrc=2047675&ssuid=S1E_uNmrSJ-&widget_ver=artemis&media=COPY

[@406mill]

Mechanic 20yrs, doing this job tomorrow and thought i'd have a quick look. I shall report back! :)

[@Haydenschreiermk2]

how did it go????

[@406mill]

@@Haydenschreiermk2 Haha, it was an S3, different engine. Water pump at the front below the intake manifold ran off a little belt. Still a bugger of a job but got it done! 🙂

[@kchan333]

Good stuff... I pretty much had an idea on how to change the water pump from watching VW Rabbit/Golf/Jetta 2.5 videos.

[@derekmartz4320]

Great video! Just ordered the water pump form your link. Does it include gasket with pump in box? Also, If I order all the bolts you have listed does it include every bolt the oem dogbone mount bolts long and short?

[@Haydenschreiermk2]

The pump comes with the new gasket on it as well as the 3 screws that hold the water pump in. It’s brand new oem Audi. You can see in the video the new gasket/O-ring is on the pump. If you order the bolts off FCP euro, just click the link and order all the bolts separate. Yes they include the dog bone mount bolts, there are 3. Those will be new too. It comes with the extra bolt for the center bushing, you don’t need to order it as you don’t have to take the entire mount off. You only need to remove the two bolts that I had in my video not the third. Also make sure you have a 1/4 inch swivel/flex head ratchet. Probably easier than what I did in my video. Feel free to DM me on instagram and I’ll walk you through the process on what you need! My ig is in the description!

[@Nickerone]

Insane video can't thank you enough

[@Haydenschreiermk2]

Glad you enjoyed!

[@Ugo2785]

at how many km did you have to change it?

[@Haydenschreiermk2]

28,000 miles on a 2018 rs3

[@Kevin_MK7RSR]

Awesome video! Thanks 👍🏻 Do you think I could do this in under 8 hours if I have a lift and all the right tools as you have shown? (I'm a moderately experienced DIY'er)

[@Haydenschreiermk2]

Yes you can! if i did it again i could probably do it in under 4 hours. i didnt have a flex head 1/4in. ratchet which delayed me. a engine support bar that goes on the top could work as well

[@Kevin_MK7RSR]

@@Haydenschreiermk2 Awesome, thanks 👍🏻 I'm sure this video will help me get it done much faster!

[@davenelson8187]

At $180 p/hr US, that over 11 hrs labor in their quote!? How long did it take u to do it?

[@Haydenschreiermk2]

ehh 5 or 6 total hours, thats without a lift or ever doing it before, audi dealer near me charges $250 an hour

[@davenelson8187]

​@@Haydenschreiermk2dang, and I thought my Dealers $180 hour was steep 😮

[@obmcdo]

I wonder how the Milwaukee insider ratchet would help in these tight spaces

[@Haydenschreiermk2]

funny you should mention that as i just bought it last week haha. the water pump bolts i recommend a 1/4 flex head. wish i had that at the time

[@obmcdo]

I’m at 63k and I’ve been adding coolant more and more. I hope to save some money and do this job. I’ve been wanting the Insider before I dig into any crazy RS3 service.

[@Haydenschreiermk2]

@@obmcdo yes its an awesome tool, its more of a want than a need. the entire job i tried to use hand tools on the car especially with tightening things just so i had more control over torque and to not cross thread anything. But my reason for getting it was because i wanted an extended ratchet and this is both a 1/4, 3/8, and 1/2. so i was sold on that. look on ebay. i got mine for like $295

[@gerardoespidio9622]

After i change it, im getting the same code as before, machanic failure on water pump, what did i do wrong

[@Haydenschreiermk2]

what code is there??? the pump has no connectors going to it. just 3 bolts that hold it in. Seems like your problem isnt the water pump itself. Are there any other codes with it?

[@carsonpark14]

How did you know it was the water pump? Mine is using a lot of coolant, coolant is getting on that belt and flinging up on the underside of my hood

[@Haydenschreiermk2]

It is an extremely common failure point on these cars. The signs are all there too, low coolant in reservoir, coolant on belt, coolant on belly pan. You can also take the passenger wheel off and take the liner off like I did in the video and you will see all the dripping coolant.

[@carsonpark14]

@@Haydenschreiermk2 okay thanks man!

[@gosuippy]

what symptoms is a leak? besides leaking coolant

[@Haydenschreiermk2]

That’s the symptom lol.

[@gosuippy]

oh right haha, i had a sweet smell in engine bay but no coolant level going down and a slight whistle it comes and goes@@Haydenschreiermk2

[@Haydenschreiermk2]

@@gosuippy yes sweet smell would be front coolant leaking or spilt somewhere. If the reservoir doesn’t go down then you go no problems

[@derekmartz4320]

Water pump has just an O ring seal and no other gasket? Metal to metal on mounting surface??

[@Haydenschreiermk2]

Yes just a O ring seal where the metal touches and seals. But the outside surface is aluminum to aluminum. I haven’t seen that part fail. It’s usually where the water pump was casted and plugged that leaks

[@kcchai2522]

did you have to subscribe or pay for the OE information u had there?

[@Haydenschreiermk2]

I am very fortunate to have a friend who was able to provide me with some of the all data information to replace the water pump. But All Data itself is a subscription service

[@1hpH6turboSti]

I watched this & had the confidence to replace myself, turns out my leak seems to be coming from the plastic coolant flange on other side of the engine & there's NO info online about it 😢

[@Haydenschreiermk2]

send me a picture to my email!!!!

[@IC3KING_ZN]

My normal Engine temp is around 212 F or 100 Celcius

[@mightymulatto3000]

1:28 I don't even have to watch the rest to know that you were getting hosed by Audi on the parts and labor.

[@Haydenschreiermk2]

oh yeah they wanted to bend me over lol

[@jimyhartley]

A tip with limited space and torx or triple square bits... put a rachet spanner on them. You're welcome.

[@Haydenschreiermk2]

i did that to get one off, the last bolt i struggled with a ratchet spanner wouldnt work. i needed inwards pressure so it wouldnt slip and i couldnt get my finger behind it. Next time i will use a swivel or flex head ratchet

[@tonys2643]

AUDI GANG!

[@Haydenschreiermk2]

YESSIR!

[@kushing8]

I’m a mechanic and I’m not looking forward to repairing my TTRS when it’s time, 110;000km on the clock no problems yet 🤞

[@Haydenschreiermk2]

Well that’s awesome! Hopefully never!

[@issakorean]

why the hell is this job easier than the mk7 gti. I went to war getting my waterpump off

[@Haydenschreiermk2]

easier!?!?!?!

[@javierjimenez3627]

I like this videos of people that think they're technician, anyway, did u get why they're charging you 3,000? People don't understand being a tech is a profesion, knowledge and talent, skills

[@Haydenschreiermk2]

they are charging $3k because they mark up the hell out of everything. every online audi dealer sold the water pump for $650. this Audi dealer near me wants $1300 for the part. as for labor they charge $300 an hour. Any Euro shop would charge half that. And i know that because i called and asked them

[@mwood-k7h]

You know why your channel isn't growing? Your content isn't very good.

[@Haydenschreiermk2]

When did I ask?

[@BENJAMIN_TTRS]

@user-zzz8ft7tc7m I disagree with your statement

[@binyam2010]

Just some jealous hater 😂. Your content is fire! Just needs more videos

[@Haydenschreiermk2]

Thank you bro! I’m curious what color his Audi RS3 is?🤣🤣🤣

[@mwood-k7h]

@@Haydenschreiermk2 You are so rude. If you are going to post videos on KZbin, you are asking for comments. If you can't handle it, then maybe this isn't for you. Doesn't seem like many people want to subscribe.