How To Replace Axle And Bearings On The Rear Wheel Hub With Freewheel

I made this video for subscriber request, in the video, I show you how to replace bearings and axle on a bike rear wheel. I use lithium-based grease. I hope this video will be helpful for you.
Check us on Facebook at / kabumbikelab
Don't forget to SUBSCRIBE and THANK YOU.
Link for removal tool (UK): ebay.us/pPTDOj
Link for removal tool(USA): ebay.us/s6NpQG
Link for chain whip (UK): ebay.us/vsj8oj
Link for chain whip (USA): ebay.us/xCm0Ap

[@dynoshane2651]

I was struggling to take old axel out and this video showed that the sprocket has to come off. Saved me big headaches brother Thanks for easy step by step process of your video..

[@johnstrawb3521]

This is how it's done---thorough, from the angles you need to see the tools and parts and the whole correctly, and in good lighting without shadow. Many thanks,

[@theredtexan]

This is a great video by the way. Before i watched it i tought the bearings went inside the hub. But now i know the cone was destroyed and push them in. I will sub.

[@TheKabumcek]

Thank you for watching :D

[@ivankooo84]

Svaka čast za video! Jbt ceo dan tražim detaljno objašnjenje, pošto nikad ovo nisam radio i konačno sve po PS-u 💪🏻😎

[@TheKabumcek]

Drago mi je da vam je video pomogao 😁

[@nickh7929]

thank you so much for this, I am currently renovating an old 90's bike I got for dirt cheap. Replacing the free wheel hub and axle was part of it and this saved me so much time!

[@grzegorzskalski8235]

Bardzo dziękuję - w końcu znalazłem porządny film o zdejmowaniu i konserwacji wolnobiegu.

[@DemonAstaScary]

man thank you! you have some sort of different accent but you still explained it good to me.

[@Hitch179]

Perfect video for helping me carry out this job on an old Claude Butler Dutch bike. Thank you. 👍🏻

[@TheKabumcek]

Thank you for watching :)

[@savipv8491]

@@TheKabumcek how u clean it?

[@myvicariouslife4012]

I like to keep the drive side axle assembly not broken down. I'm glad to see the freewheel came off easy.

[@20EUR20]

💚 Excellent. Exactly what I was looking for.

[@kwakokkian4826]

Thank you I finally found the solution.

[@SuperHyperExtra]

Excellent video! Thank You!

[@kevkev2320]

Best video on doing this. Thanks

[@harry125110]

Great video. Thanks for the help 👍

[@TheKabumcek]

Thank you for watching :)

[@xytkhi]

thank you sir it's very good explanation how to do it

[@Pavan-jf4fg]

Absolutely fantastic. Thank you so much for the video. One question, I have removed all the screws without measuring the length as you did in the video. I now have a problem slotting the wheel in. Please help.

[@tujozz]

Thanks for this video!

[@TheKabumcek]

Thank you for watching :D

[@nystromadam]

good stuff man. Thank you

[@TheKabumcek]

Thank you man :)

[@blogerbobo]

Great video, this helped me a lot

[@TheKabumcek]

Thank you for watching :D

[@blogerbobo]

One stupid question - best place to buy bearings?

[@TheKabumcek]

@@blogerbobo bike shops, ebay.. you can find them in lot of places. Just be carefull with size of them

[@lucasgarvey2264]

Nice socks, informative video

[@nigeln9697]

Thank you so much

[@VEENOMPK]

Thanks! ^^

[@flatearther7013]

Very good my friend

[@TheKabumcek]

Thank you for watching :)

[@CREAMY132]

How do I find out the length of my rear axle on my 21 speed mongoose XR-75 mountain bike if the rear axle broke into two pieces?

[@davesmith3884]

Never use a torque wrench as a breaker bar you will damage the torque ratings of the wrench.

[@TheKabumcek]

This wrench is just for this use :) Thank you for watching :D

[@anthonyhettinger9702]

Hint, never use a torque wrench as a breaker bar if you wish it to stay accurate when torque bolts to proper specs.

[@fritzfromswitzerland]

Thank you, tomorrow it's my turn

[@TheKabumcek]

Thank you for watching, Let me know how it went :)

[@matijamodric1435]

Can u makea video how to swap free wheel with freehub

[@TheKabumcek]

Yes I can, but now I'm very busy, but as soon as possible I will make it :)

[@HORNET6]

Use a ratchet handle or breaker bar or you will goose your torque wrench 👍

[@keithbrueton]

Did you get it for Christmas ?

[@shohanrahman7066]

Why my axle is cracking again and again after few days????

[@kulantro6576]

*_Cone wrench size?_*

[@TheKabumcek]

Usually it's 14 or 15, but it can be 13 or 16 too

[@slodziak222222]

5:47 DD-40

[@marlaer]

can i contact with you via mail? i have problem with my bike i mean i do not know in what order I should put the caps on the axle, I'll might to send you photos

[@TheKabumcek]

Ok, you can send me photos, I will be able to look at it in 9 hours, becouse Im on work right now 😖 [e-mail]

[@marlaer]

@@TheKabumcek ok thank you

[@matijamodric1435]

Are you from balkan?

[@TheKabumcek]

Jesam, Hrvatska

[@chrissjohnsson]

Gooö

[@anthonyhotchkiss2335]

76

[@beargibson3100]

Kids, never ever use a torque wrench as a breaker bar. These tools are calibrated an this can upset the calibration.

[@Jeff-zc6rr]

i admire the work but replacing the sprocket is as far as i go. once the bearing breaks just buy a new wheel.. $20

[@sajidrafique375]

whats wrong with Audio

[@theredtexan]

Don't measure the new axle just try the old nuts on it.

[@roxydog2004]

My man you sound like your whispering talk louder on these videos ,we can't hear you

[@finnperkins7656]

Problem is your hands are all in it it’s like you’re wanting to teach us but you’re not letting us to see each step you’re just doing it