How to Replace Axle Shaft 99-04 Chevy Silverado

Buy Now!
New Axle Shaft from 1AAuto.com 1aau.to/ia/1AAX...
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating rear axles. This video is applicable to the 00, 01, 02, 03, 04, 05, 06, Chevy Suburban, or Silverado pickup truck; or GMC Yukon, or Sierra.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oamm/1A...
• 12mm Socket 1aau.to/o7z/1AX...
• 13mm Socket 1aau.to/o7z/1AX...
• 18mm Socket 1aau.to/osm/1AX...
• 22mm Socket 1aau.to/ocm/1AX...
• Vacuum
• 3/8 Inch Drive Ratchet 1aau.to/o7z/1AX...
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oanQ/1A...
• Socket Extensions 1aau.to/o7z/1AX...
• Torque Wrench 1aau.to/owh/1AX...
• Cloth Rags 1aau.to/ohS/1AX...
• Gear Oil
• Chisel 1aau.to/ocG/1AX...
• Drain Pan 1aau.to/ohk/1AX...
• Hammer 1aau.to/omz/1AX...
• Jack Stands 1aau.to/ouU/1AX...
• Large C-Clamp
• Magnet - Extendable
• Razor Blade / Gasket Scraper 1aau.to/ob9/1AX...
• Wire Brush 1aau.to/oeH/1AX...
For More Info visit us at 1aau.to/h/bmz/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@kellsarah]

I'm so thankful I live in a state that doesn't salt the roads in the winter.

[@rileylittle3631]

Right and that means we get to have more "fun" 😅

[@sirseanisrobinson1515]

ive been a auto mechanic over 26 years and never taking apart a rear end. this video helped a lot. back in the day I had to go to a book and get frustrated when I couldn't find what I needed to help finish the job. thank you KZbin and folks who leave videos to help a fellow Mechanic

[@randallamps]

I know what you mean man. Rear ends don't go out much because all I have done is pop the diff cover(customer) and replace pads and shoes but my rear end went out recently because I neglected changing the gear oil. Only if I would have changed it in April along with my oil change I might have saved it. It had sludge in it and had no gear oil smell. Changing the gear oil didn`t make the noises go away plus the pinion and axle seals were leaking. Changing the rear end with a used one will be less costly than popping the diff cover and changing gears, bearings and seals.

[@thomasvornweg236]

Very nice and informative explanations. Must see, if you own a Chevy Suburban, Tahoe or something like that !

[@1AAuto]

+Thomas Vornweg Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/axle-shaft/i/1aaxs00028?KZbin&CTA+Comment&AXwD0

[@michaelvaughn2287]

Out of all the videos I've watched yours the best but you have left me no better than any of the others my only question that non of these videos have answered is about "how much ware can be exceptible on the spindle axle where it rides the rear axle bearing ?! Not a single video addressed this issue non and its my only question of course !

[@carlosherrera8541]

If one side of axle was broken off from hub should the other side of truck be replaced or not needed? I lost control of my truck today on a wet road and tapped the curb causing the axle to snap right behind the rim

[@thoremblem4027]

Great video. I like watching professionals work. That is a lot of corrosion on that truck. I guess that is the nature of living in an area where they salt the roads.

[@jrgatza]

ATTENTION: The torque spec is 30 ft/lbs for the rear differential cover bolts NOT 15 as stated in the video. I double checked to verify and in another A1 auto video they state it as the correct 30 ft/lbs. Just FYI, other than that this is a fantastic video!!! Thank you for all of the info A1, you guys are the best!!!

[@1AAuto]

+jrgatza Thanks for the feedback!

[@MrBen527]

Using RTV as the barrier 15 will be fine. OEM spec is probably for a gasket.

[@chall514]

Well done. I am amazed anyone would "thumbs down" this video. It is very informative.

[@1AAuto]

+Charles Hall Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/axle-shaft/i/1aaxs00028?KZbin&CTA+Comment&AXwD0

[@JonathanCarroll3579]

83 mechanics that had customers say they would do it themselves because of the video

[@shoegod2311]

If I have if I want to replace the differentials do I have to go through this same method and if I replace the differentials can I use a used differential and use the same shims

[@chopparoundz]

How much is it to repair this? I got quoted 3800 and my 96 Z71 is going to get totaled as a result.

[@juanzarate2954]

What gear oil weight should i use for a 99 silverado 1500

[@DHandyFamily]

Is there a measurement I need to know when installing a new c clip and axle? I was told by someone that there is a measurement between the end of the axle to the pinion shaft.

[@davebrewer9972]

Great video. Very helpful

[@CesarGarcia-zz2co]

Do you know if all the rear axle shafts are the same from 99-06 or do they differ?

[@SmoovMedia]

why did u change the axle?

[@Sharif-ln2qk]

hello, what year is this vehicle and is it 4WD, or RWD? Also, is this a semi-floating or full-floating axle? thanks

[@hernandezorange29]

can I hire one dom to come to my house and fix my truck

[@jordanbelfort5355]

Hey guys. Great video, very informative on the details of the repair. Was the customer concern a grinding noise during turns or something similar? My Tahoe has a grinding noise from the drivers side rear wheel when I turn and I was assuming that it was a bent c-clip in the rear axle. I'd love to know what you guys think it is. Thanks!

[@1AAuto]

+Willy Phisterbottom You may want to inspect the brake pads first to see if they're worn and might be making the grinding noise. If any of our viewers needs to make this repair we carry the part shown in this video on our website, here's a link to them www.1aauto.com/axle-shaft/i/1aaxs00028?KZbin&CTA%20Comment&ATony

[@9overH]

What else would I use to pull the clip if I don’t have a magnet ?

[@14axleman]

Thanks for the help specially on the torque. Great video

[@1AAuto]

Thanks for watching. If any of our viewers needs to make this repair we carry the replacement axle shaft show in this video on our website. Here's a link to them goo.gl/wi2Jn9

[@mudmowerregulators9559]

i would suggest bleeding the breaks lol otherwise great video it helped me a ton on my 00 z71

[@HPX584]

why would you bleed them lol

[@mattwoody1089]

Hi was it a posi rear end

[@jeremylakenes6859]

Was this a limited slip diff rear axle? Do the clips and axles remove the same way??

[@TokinLongIsland]

Do you have a video on swapping the entire rear axle assembly? I need to do it on my 2000 chevy blazer it has the gu6 rear in it. If not even some tips and things to look out for while doing it would be great. Thank you

[@1AAuto]

+john huber Thank you for watching. We don't have a video available at this time, but we will forward the request to our Studio in hopes that they may produce a video in the near future. 1aauto.com

[@loganhenderson235]

1A Auto Parts I also need to see the video on how to do this my rear end imploded shop wants 1600 to fix it and I'd rather do it myself.

[@franciscogomez2565]

Wish I would’ve know this before changing out the whole differential and spending $400 on it

[@buffderick5397]

It’s always a good idea to remove the fill plug first before you drain the fluid. If it doesn’t come off, then you won’t be able to refill the differential.

[@1AAuto]

+Derick Huffman Thank you for the feedback! 1aauto.com

[@StevenLininger]

is there a torque spec for the bolt inside?

[@rohensukkawala6490]

thanks for the great video. I need to do this on my suburban soon. how many miles on your suburban?

[@1AAuto]

+Rohen Sukkawala You're very welcome! Unfortunately I do not remember how many miles were on this truck. Any other viewers interested in purchasing these parts please visit the link below. www.1aauto.com/axle-shaft/i/1aaxs00028?KZbin&CTA%20Comment&

[@danpiwonski907]

i cant get shaft out that holds c clips in for rear axels bolt is out and shaft turns some and comes out about a 1/4 in. and then wont move any help out there on what to do it is on 2000 chev 1500

[@kcwkembm]

i have a 98 k1500. is it pretty much the same for a 98?

[@adrenalinehigh2070]

Is that a Dorman??

[@ThatFooknGuy]

I'm replacing the full rear differential on the 00 Silverado. Does anyone know the Torque Specs on the 4 outer bolts if there is one?

[@ThatFooknGuy]

Found it. Here's if anyone needs it. Ring Gear Bolts torque on 89lb ft. Bearing Cap Bolts torque on 55lb ft. Rear Axle Cover Bolts torque on 30lb. ft

[@DDD45LC]

I think there is a drain plug for 10 bolt rear

[@justinflorek5369]

My Haynes manual says the Diff cover bolts should be torqued to 30 FT lbs (you said 15 ft lbs). Any way to clarify which one?

[@1AAuto]

+Justin Florek Thank you for checking us out! We would say to go with what the manual states as that is specific to your vehicle, this is more of a general how to video. There could be slight differences in torque specs from application to application.

[@fishlifeknives7429]

You dont grease/lube it up at all??

[@kmil1967]

I have a good ideal now what’s happened to my new rear axle on my Chevy equinox that a national chain repair shop did 8 months ago yet I kept hearing a clinging sound and it’s the cap that between rear axle and differential and now my axle is not flush to differential and is hanging out about 3 inches... so it seems the C-clip was not set properly to lock my axle in place...would you not agree? ( Bc I noticed you mentioned in the video as you re-installed axle that to push it all the way back in then replace c clip then pull it back out to set and lock into place )Or would you think there is an issue with the after market axle, and do you have 2005 Chevrolet Equinox Awd right rear passenger side axle ? I garaged my suv 3 months ago...I need it back up and will fix myself if I have too! Btw..great video and I always figure out and troubleshoot with your videos and big help to know I can call or go online to order replacement parts! Thanks for always being there for customers 😍

[@bilfox4907]

Nice video very helpful

[@1AAuto]

+Bil Fox Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@yaboyfranke9370]

My axle shaft didn’t come with the bolts already installed how do I install them

[@db4652]

me podrian decir si le puedo poner un diferencial de una Yukon 03 xl a una suburban 04 z71 plz

[@garylindsey4170]

Why does no one ever show pulling the right rear axle ?

[@amberkline4461]

Do you have a video on how to do this on a 1999 k1500 Chevy suburban LT

[@1AAuto]

We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application. +Amber Kline

[@bwell41]

Why did you leave out unbolting the axel?

[@errolprinz3471]

I cant get the pin out of mine. It looks like someone hammered it in there. How do i get it out PLEASE HELP

[@ModItBetter]

heh.. running into the same problem the damn thing wont come out

[@benjaminromero7138]

do you have a video how replace entire differential ? I have a Chevy Silverado 2002 .

[@1AAuto]

+Benjamin Romero Thank you for watching. Unfortunately, we do not have a video for your application. We will keep this in mind for future repairs. www.1AAuto.com?KZbin&CTA%20Comment& 866-403-3393

[@db4652]

Benjamin Romero tengo una tahoe 02 encontraste cómo cambiar el diferencial

[@woodaddict1]

Do you have a video on a axel shaft on Dodge Ram 1500?

[@1AAuto]

Unfortunately we do not have a video for your application. We will keep this repair in mind for future videos. Thank you for watching! 1aauto.com 888-844-3393

[@Ravenholm337]

Would a '77 Monte Carlo be similar to this?

[@1AAuto]

It would more-than-likely be a different procedure. Thanks for asking. 1aauto.com 866-403-3393

[@techlove67]

what ever happened to the axle shaft simply pulling out when you remove the retaining bolts from the hub. I yearn for the old days

[@jeremylakenes6859]

Jordan Hall That would be from a full floater rear axle. Heavy duty.

[@sirseanisrobinson1515]

thanks !

[@danilonish]

Actually easier removing the linkage bar.

[@mrdilengence6884]

I need the bearing, do you sell that?

[@1AAuto]

We would need your vehicle information to locate the correct bearing for your model. +Mr Dilengence

[@michaelescobar4111]

Where are the rear abs sensors located?

[@1AAuto]

+Michael Escobar We currently do not have an auto repair video that covers this particular topic. Thank you for asking. 1aauto.com

[@michaelescobar4111]

1A Auto Parts should make one I don't think anyone has one for the rear

[@1AAuto]

+Michael Escobar They should be around the backing plate area if the vehicle was equipped with them. You should see a wire leading to them. 1aauto.com

[@shanealarcon7928]

Can u still drive a truck with a ben alxe shaft

[@1AAuto]

+jalal ala It is highly recommended to not drive on any type of bent axle.

[@shanealarcon7928]

@@1AAuto thanks bro

[@shanealarcon7928]

@@1AAuto iam just driveing at 25mph slowly tell my parts reach with it damage anything it short distance iam drivin

[@denzeld46]

Bruh where’s the taking the diff out part you left that out

[@1AAuto]

+denzeld46 Thanks for the tip! We'll pass this info along to our production team.

[@Mr572u]

That was a dangerously rusted brake line, but that's another video.

[@1AAuto]

+Mr572u While you're performing a brake job or even an oil change, you should inspect the brake lines a few times a year. 1aauto.com

[@ThomasDixon-l9f]

Sorry but a 2000 here and completely different

[@carlosemmanuel2009]

Help a washer come off

[@1AAuto]

+carlosemmanuel2009 We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

[@mikewheatley8082]

not on 06 it wont

[@capstarfish]

And then buy some gloves lol

[@Realkarthick94]

I hate this type of calipers.. 😏😏😏

[@mikehostalek6830]

@9:45 - Why would you bother to put that bracket back into place? You know that brake line is going to leak after being moved.

[@AlbertoGarcia-wf9hh]

Does the axle size length change if I have drum brakes

[@1AAuto]

It could depending on your model. If you are unsure of a certain fit of a part we have listed on our site please call us a 888-844-3393 for further assistance! 1aauto.com

[@mobiuskill9298]

My c clip will not come out. It’s like it can’t clear the lip to be pulled out. How can I get it out ?

[@jrm163]

Is it the same for a 2011 suburban?

[@1AAuto]

+Justin This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c

[@DeathrashWhiplash]

I lost a rear tire on the highway in my silverado, no weight in the box but it did clunk down pretty hard, after an alignment and new tires balancing it still shakes, do you think i could have slightly bent this axle

[@1AAuto]

+Cole We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. If it came totally off and the weight of the vehicle came down on it, its very possible that occurred. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@danilonish]

Awesome video by the way..