How to Replace Engine Mounts 2011-2021 Jeep Grand Cherokee 3.6L V6

Buy Now!
New Engine Mount from 1AAuto.com 1aau.to/ib/1AEMT00477
This video shows you how to install new engine mounts from TRQ on your 2011-2021 Jeep Grand Cherokee (3.6L V6). A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.
Estimated installation time for a professional technician is approximately: 2 hours 54 minutes
This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Jeep Grand Cherokee
2012 Jeep Grand Cherokee
2013 Jeep Grand Cherokee
2014 Jeep Grand Cherokee
2015 Jeep Grand Cherokee
2016 Jeep Grand Cherokee
2017 Jeep Grand Cherokee
2018 Jeep Grand Cherokee
2019 Jeep Grand Cherokee
2020 Jeep Grand Cherokee
2021 Jeep Grand Cherokee
Tools you will need:
• Pry Bar 1aau.to/o9H/1AXAA00020
• 10mm Socket 1aau.to/obIT/1AXAA00017
• 12mm Socket 1aau.to/ob9U/1AXAA00015
• 13 mm Deep Socket
• 13mm Socket 1aau.to/ob9U/1AXAA00015
• 15mm Socket 1aau.to/ob9U/1AXAA00015
• 22mm Socket 1aau.to/otf/1AXAA00266
• Trim Tool Set 1aau.to/oayS/1AXXX00006
• Pliers
• Ratchet 1aau.to/ocbo/1AXAA00016
• Socket Extensions 1aau.to/ob9U/1AXAA00015
• Swivel
• Block of Wood
• Gloves 1aau.to/oa9F/1AXSS00048
• Rust Penetrant
• Safety Glasses
• Floor Jack 1aau.to/oayU/1AXAA00068
• Jack Stands 1aau.to/oakI/1AXAA00065
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@broncobill3902]

Some of those bolts are much easier to access from the top. Just remove the air box. The air box comes out very easily.

[@jawaunb8405]

I used 2 pole jacks and lifted the engine and lowered the subframe. R&R is fairly simple that way. Didn’t even remove the heat shields.

[@paulshumway5880]

Part of Jeeps 100,000 mile service is changing spark plugs. Dealerships will do engine mounts at that time since the intake manifold has been removed and engine can be jacked up and has access to mounts.

[@sheerwillsurvival2064]

Great video can’t wait for the other side 👍🏻

[@AmerMawla]

thank you very much good job 👍

[@SpokeyDokey__]

Or you can just remove the upper intake manifold, jack up the engine, change both mounts. You don't have to remove the bracket. I found that way much easier.

[@commonsensesenator]

Thanks for the video, please I need some help, can you help me get the motor mount brackets for left and right side? My is broken, I have been tried to get them in my country, but I am unable. Please I will be happy if you can help.

[@dgreen3135]

The 2021 is the new body style. The title of the video says 2011-2021. Is this correct?

[@patricknovoa1367]

Wait you didn't take intake off????

[@Docante1]

Thats a plastic oil pan you are jacking under!