How to Replace Engine Oil Pan 2009-2014 Ford F-150 (5.4L)

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@glennm7492]

Great video. Very in depth! I watched another video from makuloco that claimed it was for a 2004 thru 2014 and it must have been an early model because my 2010 was way different than what he was showing. Also Makuloco removed the stabilizer/sway bar and I noticed you didn't. It seems it might have made your removal a little easier but you made it happen without doing so. Thank you so much for this!

[@ryanlion8848]

If I had all the tools I would try my best. Thank you for your time and showing! Appreciate it good sir!👍🏽

[@plantbasedprepper]

Dag nab it!!! I followed your torque specs and broke a bolt. Then looked up my 2013 f150 5.0 and it says the oil pan bolt torque is 8ft lbs..not 14.7ft lbs. That's almost double and I tightened them all to 14.7ft lbs. I only broke one but it's the stud bolt behind the differential that is hard to get to and drill out. Please warn your followers to always check the torque specs themselves. I didn't even realize you were working on a 5.4l and now I've got to figure out how to remove a broken bolt behind the differential. I was almost done with this thing.

[@jamesmartin5445]

I had my oil pan replaced yesterday on my 2012 F 150. The shop told me it was fixed. Is it normal to have some oil that maybe wasn’t cleaned off or drip from the previous leak? I noticed a small puddle today after it was parked for a while.

[@icyhotmike]

A leaky oil pan can only help that rusted frame 😂

[@Jorge-m2t3]

Nice video 🎉 thanks for the info

[@plantbasedprepper]

I have a smaller 150psi air compressor and impact wrench and I cannot get the bolts off the differential. What size do you have or recommend for us diy home repairs?

[@Pr.2104]

Do you by any chance have a part number for the oil tube O'ring? Doing this on a 2010 5.4

[@AngelR1987]

Fx4 models are different. Any suggestions?

[@coreycrosswhite8890]

Hi can you tell me if the 10-14 5.4 3v f150 revised oil pan will fit a 04-08 f150 5.4 3v. I notice the 10-14 revised pan has better oil scrapers and windege. Can you confirm if I can use the newer style 5.4 pan on my 07 f150 4x4 5.4 3v

[@835YT]

THOSE TORQUE TO YIELD BOLTS SHOULD BE REPLACED!!!! OR THEY MIGHT BREAK !!! BE CAREFUL!!!!

[@RealEstateJake]

At 24 minutes, who else thought the bolt head snapped off? We've all done that one😒