How to Replace Exterior Door Handle 01-05 Honda Civic

Buy Now!
New Exterior Door Handle from 1AAuto.com 1aau.to/ia/1ADH...
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped off Exterior / Outside door handle. This video is applicable to 01, 02, 03, 04, 05 Honda Civic
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oWS/1AX...
• Phillips Head Screwdriver 1aau.to/oWS/1AX...
• 10mm Wrench 1aau.to/ojP/1AX...
• 10mm Socket 1aau.to/oHw/1AX...
• Needle nose pliers 1aau.to/ohI/1AX...
• Needle nose pliers 1aau.to/ohI/1AX...
• Ratchet 1aau.to/oXH/1AX...
• Socket Extensions 1aau.to/oMC/1AX...
• Pick 1aau.to/ofs/1AX...
For More Info visit us at 1aau.to/h/aFL/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@cskoseki]

Finally a no frills video that properly teaches how to remove and install these door handles. I imagined I had to remove the door glass, but I didn't know it would be crucial. That snap ring is quite challenging to remove. Thanks so much. I did a lock cylinder replacement on my 2003 Civic

[@johnbroussard9480]

First I like to say thank you very much for making these videos. I absolutely depend on them to keep my three old 20 something old cars going. Second, this is not any easy repair. One has to be a little crazy to pursue this do it yourself repair. The main difficulty is that hard to see and remove "Omega" clip, called such due to its resemblance to the Greek letter Omega. What finally helped me was the encouragement given from these videos and viewer comments. Close the driver door and view the clip from outside the car, hunched over the wide open or missing window. Also study the replacement handle and installed shiny new Omega clip. From outside the closed door with ample illumination the offending clip is much easier to remove. I also used a small pair Irwin Vice Grip channelocks to gently squeeze the old lock cylinder into the replacement handle assy. At first I thought they send a defective part. In summary, hang in there stick with it, take a few breaks to cool off and watch 3 or 4 you tube repair videos with comments in order to convince yourself the Omega clip will eventually come out! Worked for me.

[@DIYDaveOK]

Hi! I just completed this very repair on a 2001 Civic 4-door, and the driver door is slightly different from that depicted. The access hole for the leftmost bracket nut is blocked by a plastic bracket that I believe connects the lock solenoid mechanism in the base of the door. Releasing the clip that frees the lock tumbler is also a bit more difficult in that configuration. You need plenty of light to see what you're doing, too! Thanks for the video.

[@cupofcoffee2914]

Or a snake camera works well

[@jimmyjack35]

So why did you mention in above comments that you don't need to remove window? You a car repair troll??

[@cupofcoffee2914]

Just restore classics for 20 years.

[@samerickson89]

I'd love to see a video of that, but I can't seem to find one anywhere!

[@yz125ryder]

Yeah my handles staying broken.

[@recheveste31]

LOL

[@1fuze920]

Lmao

[@am4230]

I was thinking, "wow, okay the door handle is the LAST piece!" Nope, it's the first piece lol

[@murky2502]

I watched this whole video and I don't have, nor do I plan to have a Civic. But thank you. I like how you pretend the battery was disconnected, but you did a function test on the window during re-assembly ;)

[@1AAuto]

+murky Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

[@WolfManJammer]

Great concise video. Especially the 'clip' zoom in and coverage. Thanks.

[@1AAuto]

+Christopher Greene We're happy to hear that it was helpful for you! Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com/2001-05-honda-civic-exterior-door-handle/i/1adhe00770?KZbin&CTA%20Comment&ATony

[@ThomasMcClaughry]

This video was SO helpful for me! The step by step directions worked perfectly, although I did have trouble with the lock C clip. A huge time saver - thank-you!!

[@ezgruv]

Thanks for this video. Everything went smoothly using these instructions!

[@Mrpoker-hr1ud]

Gotta replace my driver door tomorrow morning, this part is gonna be a pain in the butt

[@1AAuto]

+Billy The Kid Thanks for checking us out, we wish you the best of luck and hope everything goes smoothly! 1aauto.com

[@jenniferculp1643]

Do you have a video for the rear door on a 2004 4-door civic?

[@bestillandknow3939]

At 4:15 of the video, you are undoing the clip on the "latch rod". You eventually pop it out with a screwdriver somewhat effortlessly. I am trying to remove the same clip on a 2005 Acura EL, which should be the same thing. My latch rod will not pop out. I can see the other side (not shown in your video) and the plastic clip has four fingers that appear to lock on to the head of the rod. He harder I pry, the more the fingers clap down on the head. Any ideas? Anyone?

[@JohnRyanYourHavertownRealtor]

Thanks. My 2003 was slightly different but this video helped immensely!

[@1AAuto]

+John Ryan Thank you for your feedback!

[@mkprr]

Thank you!!! Mine was a different year so a little different layout but this made it all workout. I had to have the window rolled down in the exact perfect spot to remove it so I had to reconnect and and unconnect the power to adjust it but eventually got there.

[@1AAuto]

+Michael Perry Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@jenniemendrezsoto5521]

Good job . Hi there I bought the new handle Honda 2005 how ever the lock is to big for that hole , am I doing something wrong ? Thanks once again .

[@tanjawiinusa4611]

did this job today. It was hard enough to feel proud of it.

[@1AAuto]

+Tanjawi in Usa Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@tengdayz2]

Thank you for a great professional video on how to do this!

[@carlosmoreno2387]

Excellent video very helpful thanks guys A1 auto parts 👍👍👍

[@rodolforeyes8374]

Great video. Helped me tremendously.

[@1AAuto]

Thanks for watching. 1aauto.com

[@ermac9647]

Great Job sir!! Still a lot for one exterior door handle 😓

[@fahdsamad2874]

do you have a video for the rear door on 2010 honda civic ?

[@hurtfulls4560]

Anybody else having problems with getting that clip holding the lock In place????

[@BigGmantis]

Great Video! Thanks!

[@JonathanV07]

Do I need to take the window out to complete the job cuz I'm having trouble locating and removing the nut? since its not in place at the hole I believe

[@am4230]

I was narrating in my mind the whole time like, "now, these bolts'll be rusted out..." "next, the water barrier should rip and crumble," "this piece probably won't re-seat properly and will kind of jiggle." "finally, re-remove the interior panel because you forgot to attach the..." lol

[@1AAuto]

+W Goods Thanks for checking us out! Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@MrTerry89100]

Q bien explicas pero lo mas importante no se ve !!!

[@7fisherman7]

Amazing video! Good job!

[@1AAuto]

+Danny Char Thank you for the feedback!

[@BlueOriginAire]

Thanks, l will now be the Hero again for my gf. 🤗🙋🏻‍♀️ It’s my first time... What can go wrong , right ?🤔🥴😳

[@DIYDaveOK]

Hi! Great video - have one question. It looks like there is room to work on the handle without removing the glass *if* the window is completely closed (full up position). Is that correct? That is, must the window be removed?

[@brucea550]

Window does NOT need to be removed. However, you have to be a little more creative in getting to the latch.

[@DIYDaveOK]

@@brucea550 Thanks for the reply! Actually I undertook this repair on a friend's car (4- door version) about a month ago and your are right - I didn't have to remove the window, but I ended up removing it due to the very issue you mention - getting to the latch. It *could* have been done, but it would have been decidedly trickier!! I suspect the four-door configuration makes it just subtly different enough to make it a bit more difficult.

[@thaik56]

I have my rear driver side outer door handle that fell off through the outside when I pulled on it, can't I just drop the new one through the outside?

[@dominicbuisson8754]

merci

[@robertzavala5067]

Does the window have to be open?

[@sandyaviles9019]

Where can I buy a - left front door upper door seal rubber 2004 Honda Civic?

[@1AAuto]

+Sandy Aviles Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@Benjamin_Bratten]

Will this fit on the 2002 Acura 1.7 EL? I know that the EL and the Civic are very similar in a lot of ways.

[@NovaZocket52]

Yes the Acura EL is the United States Civic EX trim

[@hollowmoon7355]

would’ve been helpful for the rear doors they’re twice as hard to get to

[@7fisherman7]

Amasimg!

[@1AAuto]

+Danny Char Thank you!

[@junellealvarez586]

very nice

[@deannayip1983]

How much would it cost to replace the exterior door handle for 2004 civic

[@1AAuto]

+Deanna Yip Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/search?q=exterior+door+handle&year=2004&model=375

[@michaelg6641]

Umm..think ld rather simply pay someone.. mine just need tightening it seems like

[@415salud]

Thank

[@15DurangoRT]

No need to remove the window

[@ceciliacarmona4208]

Great video but Geeze, this is gonna get hard. 😭

[@otisemch3070]

Will this work on a 4 door 2005 civic?

[@1AAuto]

+Otis Emch Great question. These steps should be similar enough to complete this task:

[@rep1451]

YES ! I did it 2h ago, without this video I would just kill myself. thx 4 video!

[@lkgaming6902]

What clip is removed at 5:00 ?

[@1AAuto]

+LK Gaming Thanks for checking us out. This is the clip that secures the lock provision in place. See kzbin.info/www/bejne/pWazhZynq5iXoJY for some more information on that clip and how it works!

[@andrewmorales7647]

how much for the original handle

[@1AAuto]

+Andrew Morales Thanks for checking us out. The handle shown in this video can be purchased here! www.1aauto.com/2001-05-honda-civic-exterior-door-handle/i/1adhe00770?KZbin&CTA+Comment&PTiqv3dj4 1aauto.com

[@NinjaTrackProductions]

You missed a step. After 4:35 there's another rod (connected to the lock?) similar to the one you just removed which is somewhat smaller and positioned on the left side of the handle. In this video you never remove it.

[@omarct]

Jesus Christ, could they have made this any harder? Why not just dismantle the whole vehicle while am at it.

[@MrSidney9]

Lol I agree

[@jimmyjack35]

They don't want "US" to work on our own vehicles! $$$$