How to Replace Fan Clutch 2008-2010 Ford F-250 (6.4L Diesel)

Buy Now!
New Electric Fan Clutch from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new radiator fan clutch in your 2008-2010 Ford F-250 (6.4L Diesel). The radiator fan clutch relies on a temperature sensitive spring and a viscous fluid to operate effectively. When worn, it could stick and spin too fast, or stay loose and not spin enough. If the fan spins too early, or not enough, you could face too low or too high coolant temperatures, which could be problematic.
This repair was done on a 2008 Ford F-250 Super Duty XL 6.4L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty
Tools you will need:
• 10mm Socket trq.video/oaW3...
• 11mm Socket trq.video/obfA...
• 13mm Socket trq.video/obfA...
• 8mm Socket trq.video/oaW3...
• Fan Clutch Wrench
• 3/8 Inch Impact Gun
• Air Chisel
• Ratchet trq.video/obqz...
• Socket Extensions trq.video/obfA...
Subscribe: / @trq
Check out our playlist:
Ford F-250 Super Duty 2nd Generation 2008-2010: • Ford F-250 Super Duty ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@aaronmcnees4011]

How'd u get the fan off magic

[@tonyv33ee]

So to remove you have to airhammer it to the right correct?

[@reytech1786]

First person here! Love your videos ❤❤❤

[@deanmclean2938]

8:29 forgot to tell you that you have to hold the waterpump from turning

[@007squirreldehne2]

On your video you're pulling that fan off clockwise don't believe me watch the videos

[@Sam-x3q3q]

Helpful video except to take it off you said u was spinning it counter clockwise! And to tighten you say the same! Other then that helpful

[@dawsonwood7183]

So the fan just spins off??? I'm currently doing the same and call bs