How to Replace Flyscreen Mesh - DIY

[@sanchezlouie777]

I own a window cleaning business in Palm Springs California, everything that you do in your business I do as well, with the exception of gutter cleaning. It doesn't really rain in Palm Springs because I live in a desert. Your videos are very professional looking. Keep up the good work. Thanks for sharing your videos. I'm looking forward to seeing more.

[@MrCraiglicious]

Thanks so much!!! I didn’t see this video until AFTER I had tried to attempt it my way,what a disaster that was,just ask my wife!😆 Since I watched your video,what took me 2 hours before,took me only 30 minutes after watching your video. You saved me a lot of time,grief,money n my marriage!!😂🙏

[@alice_dd_0392]

Thank you for your easy explanations and demo, completed my first fly screen🙏

[@CathWoodVideos]

Super clear instructions, thank you! I was wondering how much overhang to cut, and how I should trim it, so I appreciate your tips.

[@stuartpx1]

Seek Adventure dude. Man I miss you making your other videos.

[@WouterCordewiner]

Thank you for this clear instruction video! It allowed me to replace my fly screens.

[@Prizm44]

Thanks for this 👍Got a bathroom flyscreen done in under an hour once I picked up a couple tools. First time. Not perfect, but certainly good enough for a bathroom. Thanks

[@dorisdavid0]

Thank you for a great video. I feel quite confident now. Will replace mesh myself.

[@BrassLock]

From one Aussie to another, Thanks Mate!

[@vickoutsoufis8329]

Thank you for this video, we were able to change our fly screens independently.

[@andycrispin6752]

Face down on concrete?

[@BrianJohnson-eu2on]

😊where do the rollers go on the screen.

[@JustBeYouooh]

Where did you get your Stanley knife that closes up?

[@senorkapowssite]

What your video, got on with the job and worked beautifully.. Thank you.

[@johnbattaglia5350]

Very clear and relevant instructions. Thanks mate.

[@RexyFan]

What mesh do you recommend that be more durable for cats trying to climb it or kids trying to poke their fingers through making a hole ? Crimsafe is expensive.

[@Gkisok]

Legend, great clear instructions and easy to follow. Thanks mate

[@darrenjwaters]

It's the Seek Adventure dude! 👋

[@subtalent]

Thanks mate from across the pond.

[@gracehc9356]

This video was very helpful. Thanks for sharing !

[@adelinapica8992]

Thank you for the informative video. I bought the screen, tried to push mesh with scissors and rubber on top without success! Obviously I need the roller the do the job correctly! Thank you again.

[@wimm1392]

Very good instructions. Thanks very much Mr.

[@Narayanan5]

My concern is that I may tear the screen when I push it in with the roller. I.e., that the roller edge (being metal) would tear the screen. Should this be a concern?

[@tobiasampersand]

HOW DO YOU PUT IT BACK IN THE FRAME?!?

[@Cesar-xy6fd]

May I ask what size of mesh size suitable for insect window screen ? Thanks

[@mariasur360]

Thank you for your video, very clear instructions 😀

[@cre8hive1]

lay a suitable mat on the ground or bring a portable table to work on, so as not to scratch the customers frame, then continue as per video above. good job mate!

[@bradthurkle7217]

Thanks for that. Done plenty but looking for little tricks of the cheers 🍻 mate.

[@mcshmoe1143]

Nice and concise. Thank you

[@chadmck71]

Good work I feel confident enough to do it now. Thanks.

[@vadam4956]

The great job was done. Thank you.👍

[@ivenchan4692]

The gap for the rubber strips at flame is 0.5MM...so what is the diameter of rubber I should I use? 0.4MM, 0.45MM or 0.5MM?!?!

[@Ert604]

I’ve forked mine every time! Cutting the mesh with the roller!

[@AJ-kv1po]

Are you holding the mesh too tight when you roll? when you push it in it tightens up as it goes in.

[@dontswin]

Thanks my man I think I can handle this. I only have about 6 to do!

[@tihkal2106]

Friendly, informative video. Cheers mate

[@dsawebb1]

Well done young fella.

[@ryandahari3195]

Thank you. I'm going to use your instructions to replace my patio mesh.

[@williamwang5830]

Nice job 👍

[@1Toonie]

Great explanation and demo. Thanks!

[@maciejwronski8321]

great stuff, thanks bud!

[@pauldubar6014]

Great job

[@SharpeSound]

Thank you for your video

[@arashhashemi8108]

easy to follow. well done!

[@avidutubewatcher]

Great video, thanks

[@ahn1073]

Awesome experience

[@locust7777]

Mine is always too loose

[@farookruth]

I surprised to see you here I thought you teach us only about 4x4

[@fahadalbusaidy7182]

Thanks good information

[@leesmartin]

Nice one mate

[@schauhan2198]

From fly screen installation to 4wd and camping tips ..

[@peachygotit]

Thankyou will give it a go

[@stevejohanson8023]

Thanks Mate.

[@iluvsnowball1]

Nice job, wheres the 4wd lol

[@phiromtauch6059]

Laughing out loud I knew I remembered him from somewhere

[@DoyaknowwhatImean]

@@phiromtauch6059 yes, Seek Adventure, great channel but unfortunately he doesn’t make videos anymore but he did do one more since the last time I looked and I must say I’d forgotten just how genuine this guy is compared to a lot of the other garbage on the tube. Thanks for reminding me👍

[@Dessert_x_Tat]

Thank you.

[@MadPenguin911]

Great Video mate!

[@jonnywaselectric]

I recognise this bloke, he makes 4wd videos too

[@anamaldonado8261]

Didn't show hot to put it back 🙄😳😭😭😭

[@aralevonian8391]

Thanks that was good

[@v4yt126]

great

[@vg7735]

Has anyone else changed the mesh while the frame is in the window? lol This is how I had been doing it.

[@jusefmadhloum9252]

Instructions unclear. I've cut myself.

[@Adgum1]

Holy shit, its SeekAdventure!

[@antzznz]

I came here to say this also haha

[@simonpiper6997]

Nice and parrarerl? All sweet bro good vid it nice easy to understand

[@newport5504]

Seek adventure!

[@bobwang8903]

Easy(little bit)

[@liamscw]

Bruh seek adventure 🤙

[@liamscw]

@@gofigure_1 lmao you don't understand idiot

[@ZoomStranger]

@@liamscw sadly, injecting "bruh" into any communication immediately voids your credibility. Yes, it seems to be our fine Seek Adventure friend - good to see him again!

[@anthonycondon9663]

Terrific little video thank you.

[@marcom6947]

Thanks very much 😃