Рет қаралды 23,794
Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ib/1ASL...
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2009-2014 Honda Fit. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2009 Honda Fit
2010 Honda Fit
2011 Honda Fit
2012 Honda Fit
2013 Honda Fit
2014 Honda Fit
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 19mm Wrench 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• Pickle Fork
• Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
• Jack Stands 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.