How to Replace Front Door Lock Actuator 2000-2006 Chevrolet Tahoe

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@rodrogers6895]

Thanks for keeping everything well lit so we can see what is being done.

[@austinvanschoubroek1712]

Aye, thank you. You made my Sunday a lot easier for sure.

[@naruttaanime9471]

Ty for extra time for step by step detail and camera still-shot check for corrosion. Later we can put dab of silicone grease on each connector and rod slide contact. Without this last greasing, EVERYONE will need another actuator within 5 years. The binding and friction is what made the failure in the first place. The lesser used locks will be next to go.

[@handymonshawn]

Thank you for making video helped alot. Replaced mine today took me a little over an hour I have sausage fingers. Wasn't too bad just took my time not to break anything or bend rods. 🤙

[@handymonshawn]

Also lubed my window tracks while was open.

[@209Stretch]

Would the new door actuator make the door feel a little rougher to close upon contact with the door jamb hooking assembly thing? Mine feels a little rough upon closing with a new actuator🤔

[@gingin1050]

I replaced mine and sometimes the lock binds up, and feels like the bars are not allowing full movement. (Its not the lock cylinder)

[@Terry-i4c]

How do you get the door open mine won't unlock to open

[@donnfl]

After Replacing the door Lock driver side. I get a chattering every time it locks. It works but annoying. Check all your electrical operation before putting your door panel back together.