How to Replace Front Lower Control Arms 1999-2004 Jeep Grand Cherokee

Buy Now!
New Control Arm from 1AAuto.com 1aau.to/ia/1ASLF00126
This video shows you how to install new front lower control arms from TRQ on your 1999-2004 Jeep Grand Cherokee. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
This process should be similar on the following vehicles:
1999 Jeep Grand Cherokee
2000 Jeep Grand Cherokee
2001 Jeep Grand Cherokee
2002 Jeep Grand Cherokee
2003 Jeep Grand Cherokee
2004 Jeep Grand Cherokee
Tools you will need:
• 21mm wrench
• 19mm Socket 1aau.to/oasQ/1AXAA00043
• 21mm Socket 1aau.to/oasQ/1AXAA00043
• Torque Wrench 1aau.to/oaUj/1AXAA00044
• Anti-Seize Grease
• Gloves 1aau.to/oazu/1AXSS00048
• Rust Penetrant
• Safety Glasses
• Floor Jack 1aau.to/oaig/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o6B/1AXAA00065
• Ratchet Strap
• Wheel Chocks
• Wire Brush 1aau.to/ovH/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@diekatzefliegt]

Hi thanks for this video. Can I just drop my jeep onto the ground to tighten the bolts to spec rather than jacking it up off the stands?