How to Replace Front Struts 2013-2018 Hyundai Santa Fe

Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ic/1ASTS01682
This video shows you how to install new front struts from TRQ on your 2013-2018 Hyundai Santa Fe. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.
Estimated installation time for a professional technician is approximately: 2 hours 36 minutes
This repair was done on a 2016 Hyundai Santa Fe Sport Base 2.4L Sport Utility 4-Door FWD Automatic and the process should be similar on the following vehicles:
2013 Hyundai Santa Fe Sport
2014 Hyundai Santa Fe Sport
2015 Hyundai Santa Fe Sport
2016 Hyundai Santa Fe Sport
2017 Hyundai Santa Fe Sport
2018 Hyundai Santa Fe Sport
Tools you will need:
• 19mm Wrench 1aau.to/oaeW/1AXAA00010
• 12mm Socket 1aau.to/ocb7/1AXAA00015
• 14mm Deep Socket
• 14mm Socket 1aau.to/ocb7/1AXAA00015
• 15mm Socket 1aau.to/ocb7/1AXAA00015
• 17mm Socket 1aau.to/ocb7/1AXAA00015
• 19mm Socket
• 21mm Socket
• 32mm Socket 1aau.to/oen/1AAST00003
• Trim Tool Set 1aau.to/oaz3/1AXXX00006
• Ratchet 1aau.to/ocdf/1AXAA00016
• Torque Wrench 1aau.to/obfC/1AXAA00044
• Gloves 1aau.to/obdo/1AXSS00048
• Safety Glasses
• Chisel 1aau.to/onu/1AXAA00055
• Floor Jack 1aau.to/oaAM/1AXAA00068
• Jack Stands 1aau.to/oanA/1AXAA00065
• Punch
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@garyhemmingstad7409]

I bought these a week ago, but they don't fit. It is impossible to get the knuckle in, the spacing is too tight. I put the old ones on and it slips right in. I see he struggles a bit to get it in during the video, but mine wouldn't go no matter how hard I tried. I changed my Elantra's using TRQ parts and it fit perfectly. Great videos though, they really help!

[@XxRGVHELLxX]

Is it really recommended for the 116 lb torque? What if I don't have the tool and just tighten it?