How to Replace Front Wheel Bearing & Hub Assemblies 2007-2012 Nissan Versa

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASH...
This video shows you how to install new front wheel bearing and hub assemblies from TRQ on your 2007-2012 Nissan Versa. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2007 Nissan Versa
2008 Nissan Versa
2009 Nissan Versa
2010 Nissan Versa
2011 Nissan Versa
2012 Nissan Versa
Tools you will need:
• Pry Bar 1aau.to/oWc/1AX...
• 10mm Socket 1aau.to/obgu/1A...
• 17mm Socket 1aau.to/obA6/1A...
• 22mm Socket 1aau.to/opi/1AX...
• 30mm Socket
• Brake Caliper Hanger 1aau.to/oju/1AX...
• Pliers
• Ratchet 1aau.to/obFN/1A...
• Socket Extensions 1aau.to/obA6/1A...
• Torque Wrench 1aau.to/oaJR/1A...
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oDV/1AX...
• Copper Anti-Seize
• Cotter Pin
• Gloves 1aau.to/oagV/1A...
• Rust Penetrant
• Safety Glasses 1aau.to/o9R/1AX...
• Sandpaper
• Floor Jack 1aau.to/o9o/1AX...
• Hammer 1aau.to/oV5/1AX...
• Jack Stands 1aau.to/oWD/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@nladyman]

Just got mine done today, thank you for the video instructions were very clear and easy to follow!

[@gregoryrussellakainfinitet6682]

Thank you so much for this detailed video including the torque specs. I did this for both my front wheel today and it went super smoothly!

[@johnwampler629]

Why so few comments? This is a great instructional video including the axle nut torque specs! Well done and great camera work and dialogue.

[@niror8721]

This is great! Thank you for the thorough step by step process.

[@Tactics_Actual]

“Wheel hubs pretty loose “ breathes heavy😂

[@johngibson5406]

This video was awesome. very detailed thank you so much

[@tommiller6580]

I really don't understand why you don't ( I didn't mean you, I meant the car manufacturer ) have a castle nut holding the wheel hub on, that cotter pin is only there to keep that hub nut from coming off down the road . I would rather they put a castle nut there , torque it down then put the cotter pin in. after torqueing if the cotter pin doesn't line up with a notch in the castle nut you can always back off the torque or put a little more foot pounds on that castle nut to get the cotter pin it the notch to prevent it from even loosening a little. Great video by the way, thanks !

[@woes3n692]

life saver

[@frankj19758]

Having an issue getting the abs sensor back in. It goes in, but will not go flush against the knuckle. What do I do?

[@GirthosaurusRex]

Online your part lists to 2011. Struggling to find a 2012 versa sv

[@TRQ]

+@Fence-Dogs-More We are very sorry that you are unable to locate this assembly for your model. Please check back periodically as we are always updating inventory!

[@JLuxx-fe9sy]

That video was fukin dope ass, ur Boss bro, good job.!!!!!!

[@MrShockman10]

You people who work on theses versas are some of the worst hacks to watch. You do the bare mininum to the steering knuckle. As I said your hacks. I would only use OEM parts not after market garbage. The versa you show who own them are a disgrace not taking care of there car.