How to Replace Front Wheel Hubs and Bearings 2011-2014 Hyundai Sonata

Buy Now!
New Wheel Hub from 1AAuto.com 1aau.to/ia/1ASHF00179
This video shows you how to install new front wheel hubs and bearings from TRQ on your 2011-2014 Hyundai Sonata.
This repair was done on a 2013 Hyundai Sonata GLS 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obAC/1AXAA00013
• Pry Bar 1aau.to/o4T/1AXAA00020
• 18mm Wrench
• 10mm Socket 1aau.to/obxL/1AXAA00017
• 12mm Socket 1aau.to/obUA/1AXAA00015
• 17mm Socket 1aau.to/obUA/1AXAA00015
• 18mm Socket 1aau.to/oaxL/1AXAA00043
• 19mm Socket 1aau.to/oaxL/1AXAA00043
• 24mm Socket
• 32mm Socket 1aau.to/odC/1AAST00003
• Brake Caliper Hanger 1aau.to/omd/1AXAA00439
• Dead Blow Hammer
• Press
• Needle nose pliers 1aau.to/oHi/1AXAA00051
• Needle nose pliers 1aau.to/oHi/1AXAA00052
• Pliers
• Snap Ring Pliers
• Ratchet 1aau.to/obXy/1AXAA00016
• Torque Wrench 1aau.to/oa2o/1AXAA00044
• Bungee Cord
• Cotter Pin
• Gloves 1aau.to/oaLg/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oapA/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oabV/1AXAA00065
• Large Hammer
• Sledge Hammer
• Vise
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Hyundai Sonata 2011-14 6th Gen: • Hyundai Sonata 2011-14...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@ziontziont3106]

This dude made it look easy… just have the tools n parts, do it on a Saturday morning

[@Librarysmith-gk3mk]

i like the how he his camera angles are very clear and visible, most importunely is his step by step start to finish process. thanks

[@AbouTto_]

You... Buy the knuckle complete. Good video.

[@josiahcage6]

Is the press a must in this process?

[@gonzalezgonzalezcollectibl1070]

If I just want to replace the studs is it the same process?