Thanks. Exactly what I needed to know with a concise description.
@mrfxr16952 жыл бұрын
Thanks John, All the best
@thecurrantbun6 ай бұрын
Thanks, might be a few years ago, but just the info I needed 👍🏻
@mrfxr16956 ай бұрын
Thanks 👍
@FrenchConnectie2 жыл бұрын
Just what I needed! The grey clips 😉... Thanks Brother!
@mrfxr16952 жыл бұрын
You're welcome All the best👍
@time4change878 Жыл бұрын
Hi New filter and o ring fitted with no leaks. My method was as follows. first hand tighten filter nut. Then mark housing, top and nut for reference. Now remove nut and smear inside of nut and outside of lid where they will connect with a little petroleum jelly, only a smear. Now tighten until all lines are aligned then with the filter protected from a hard floor ( i used a bit of carpet) I then held it down and tapped around on one of the ridges on the plastic nut with a small cold chisel until the line on the nut had passed the other markings by about 1.5 inches. Seems to have worked
@mrfxr1695 Жыл бұрын
I like your way, it will clearly prevent overtightening 👍🙂
@arpadhenrikgabrisdaddy3159 Жыл бұрын
That electric connection metal wire just need to push in a bit and you are able to disconnect it! (And you will not loose it)
@mrfxr1695 Жыл бұрын
Thanks, it is true, your right I've tried that but it didn't want to come out so I opted to pull it out. Luckily I have found the clip
@davidhitchen7122 Жыл бұрын
Great that thanks, had 3 mechanics try to change the filter but looks like the housing is bust.
@mrfxr1695 Жыл бұрын
I hope it helps👍
@johnclarke6542 Жыл бұрын
It's people that over tighten the body trying to remove the ring making it oval , vauxhall fitted a very similar filter housing that similar it's the same paper filter, never heard of much problem with that filter housing
@mrfxr1695 Жыл бұрын
You're right about overtightening issue Thanks for sharing your experience 👍🙂
@guidovandenbalck Жыл бұрын
Whats the part number of this complete filter housing please?
@mrfxr1695 Жыл бұрын
Here is the info 🙂 Fits Citroen and Peugeot as well, see below For Fiat Ducato 06-18 Fuel Filter Housing Product Specification Full Set: Outer diameter [mm]: 114,4 Outlet Diameter [mm]: 10 Height [mm]: 233 Reference OE/OEM Number CITROEN: 1606450480, CITROEN: 190189, CITROEN: 190198, FIAT: 1362976080, FIAT: 1346387080, FIAT: 1352490080, PEUGEOT: 190189, PEUGEOT: 1606450480, PEUGEOT: 190198 Buyer Guide Fiat Ducato 130 Multijet 2.3 D 250_, 290_ Box 2287ccm 126HP 93KW (Diesel) 06-18 Fiat Ducato 130 Multijet 2.3 D 250_, 290_ Box 2287ccm 131HP 96KW (Diesel) 11-18 Fiat Ducato 130 Multijet 2.3 D 250_, 290_ Platform/Chassis 2287ccm 131HP 96KW (Diesel) 06-18 Fiat Ducato 130 Multijet 2.3 D 250_, 290_ Bus 2287ccm 131HP 96KW (Diesel) 11-18 Fiat Ducato 160 Multijet 3.0 D 250_, 290_ Bus 2999ccm 156HP 115KW (Diesel) 06-18 Fiat Ducato 120 Multijet 2.3 D 250 Bus 2287ccm 120HP 88KW (Diesel) 06-11 Fiat Ducato 120 Multijet 2.3 D 250 Platform/Chassis 2287ccm 120HP 88KW (Diesel) 06-11 Fiat Ducato 120 Multijet 2.3 D 4x4 250 Platform/Chassis 2287ccm 120HP 88KW (Diesel) 10-13 Fiat Ducato 120 Multijet 2.3 D 4x4 250 Box 2287ccm 120HP 88KW (Diesel) 10-13 Fiat Ducato 120 Multijet 2.3 D 250 Box 2287ccm 120HP 88KW (Diesel) 06-18 Fiat Ducato 150 Multijet 3.0 D 250 Bus 2999ccm 146HP 107KW (Diesel) 10-13 Fiat Ducato 160 Multijet 3.0 D 250 Bus 2999ccm 158HP 116KW (Diesel) 06-11 Fiat Ducato 160 Multijet 3.0 D 250 Box 2999ccm 158HP 116KW (Diesel) 06-11 Fiat Ducato 160 Multijet 3.0 D 250 Platform/Chassis 2999ccm 158HP 116KW (Diesel) 06-11
@angelaboddington34692 жыл бұрын
My husband has attempted to change this filter himself this time after watching your video. Like you his bottom clip sprung out and he has lost it! Would you know where we can get another. 🤣
@mrfxr16952 жыл бұрын
try online (ebay perhaps) or contact fiat dealer, being a small wire clip I can't imagine to be expensive
@matsekberg Жыл бұрын
You are supposed to push the clip towards the connector, not break it away
@jonnyenglish365 ай бұрын
Thank you 👍
@mrfxr16955 ай бұрын
Thanks 🙂👍
@brightgreencarrot Жыл бұрын
Thanks
@mrfxr1695 Жыл бұрын
Cheers👍
@studezzaАй бұрын
Try pushing the metal clip in on the bottom housing as that's how in works to remove and not by taking it off😂
@mrfxr1695Ай бұрын
Thanks
@michaelfraser5723 Жыл бұрын
awesome
@mrfxr1695 Жыл бұрын
Thanks👍
@freewheelinfranklynАй бұрын
I wasn't sure how to release the fuel lines and everything's so fragile. It worked like a charm thanks for your well explained video. To remove the top without a special tool I wrapped an old drive belt around it and clamped it tight with a vice grips. It gave enough leverage to unscrew it without breaking anything
@mrfxr1695Ай бұрын
Many thanks for positive comment . I'm glad the video helped. The old drive belt trick is a good one 👍
@offshoretomorrow33469 ай бұрын
The top fuel pipe will NOT disconnect, dammit!
@mrfxr16959 ай бұрын
Pay attention to light grey plastic clip. By releasing the clip it should come out
@theangrygingerthebananavan42072 жыл бұрын
Cheaper way, buy the Filter Housing tool. Remove the Housing, mark position on cap and housing to line up after replacing filter. Place housing in the Tool and unscrew the cap using Stilson of oil filter removal chain. Change filter then refit cap, line up the marks you made on Cap & Housing.
@mrfxr16952 жыл бұрын
It is cheaper if it leaks only from lid and housings joint
@theangrygingerthebananavan42072 жыл бұрын
@@mrfxr1695 agree. My friends leaked because it was over tightened.
@mrfxr16952 жыл бұрын
@@theangrygingerthebananavan4207 I had one that leaked from fuel temperature sensor connector(located at top of the lid and can't be replaced on its own)
@bobbyfischer6786 Жыл бұрын
Mine has a very slow leak and i cant see where from, is the sensor at the top a common place to leak?
@esifoner2 жыл бұрын
Thanks bro...is the same procesa to Ducato 2013?
@mrfxr16952 жыл бұрын
Thanks, yes it is It's same on all models since 2006
@Brumie-qq4dc6 ай бұрын
Only on 1.9tdi
@time4change878 Жыл бұрын
When removing filter from housing after the housing has been previously over tightened the o ring becomes oval and will not seal. I have ordered a new filter (not housing) that comes with new o ring so hoping this will stop leak
@mrfxr1695 Жыл бұрын
You're absolutely right there. My first filter housing leaked even after replacing seal. Second one leaked from fuel temperature sensor on the lid, that's why I had to replace it again 😞.
@Rhino111111116 ай бұрын
Tried replacing my fuel filter on Suzuki vitara very similar to this but it’s leaking fuel everywhere now
@mrfxr16956 ай бұрын
Leaking from hoses or filter housing?
@davepilkington82102 жыл бұрын
really helpful to know how to remove the pipe clips, thanks
@mrfxr16952 жыл бұрын
Cheers👍
@luke54362 жыл бұрын
Given the problems reported with this so often they should have been forced to issue a recall.
@mrfxr16952 жыл бұрын
I agree, but manufacturers only recall faults that are endangering life unfortunately
@SunriseSuperThruster3 ай бұрын
Excellent. I could not have done this without this video.
@mrfxr16953 ай бұрын
Many thanks 👍 I'm glad you found this video helpful 🙂
@tombryson72586 ай бұрын
Great video. Thanks for sharing....
@mrfxr16956 ай бұрын
Thanks 👍🙂
@Road.to.recovery2 жыл бұрын
Thanks for this video great help 👍
@mrfxr16952 жыл бұрын
Glad it helped All the best
@hhrfc6712 жыл бұрын
Thanks, great help and will save me a few bucks.
@mrfxr16952 жыл бұрын
Cheers🙂👍
@joesnow7392 жыл бұрын
Hi there, followed the steps, but my van is now stalling after starting the engine. Do you have any advice? Really hope I don't need to take it to a garage!
@mrfxr16952 жыл бұрын
Did you purge the air from the filter. You have to do it by running ignition on for 10 secs and than off and repeat few times as explained. By doing that electric fuel pump forces fuel through the system and pushes the air back to the fuel tank through return hose, you should not start engine during this process. Even if you have started engine after few stalls should be fine. Also did you checked all connections, it is not drawings air in through bad connection somewhere?
@joesnow7392 жыл бұрын
@@mrfxr1695 thanks for your reply. I repeated the first process a few times, still kept stalling. Checked connections everything looked fine, then primed one last time and decided to pump the accelerator a little whilst turning the engine on and it seems to of done the trick for now. Would that of helped force the air through the system? Cheers.
@mrfxr16952 жыл бұрын
@@joesnow739 it could be, it seems you've done it
@joesnow7392 жыл бұрын
@@mrfxr1695 thanks alot for your video, helped to get the job done. Very thorough.
@mrfxr16952 жыл бұрын
@@joesnow739 thank you All the best
@danielreyes-gw3lh2 жыл бұрын
impecable muchas gracias por el video tutorial
@mrfxr16952 жыл бұрын
gracias por las palabras de apoyo
@paulcowd63102 жыл бұрын
Thank you this is a great help
@mrfxr16952 жыл бұрын
Thanks👍
@mitww2 жыл бұрын
Absolute hero
@mrfxr16952 жыл бұрын
Thank you
@alanjames58832 жыл бұрын
No model year in description
@mrfxr16952 жыл бұрын
All X250 diesel models from 2007 onwards, Fiat Peugeot and Citroen
@offshoretomorrow33469 ай бұрын
Latest models have different connector clips, btw.