How to replace fuel filters on a Nissan Titan diesel

[@leoncasey9803]

Thank you for the info!

[@lifeoft-jay3226]

For sure thanks for watching

[@seanrhone5306]

What did he use to spray out the lower filter housing?

[@lifeoft-jay3226]

Brake cleaner

[@raildog21]

Do you know what the torque specs where for when he tighter back the fuel filter caps?

[@lifeoft-jay3226]

Not sure would have to find out

[@ericrivera219]

Stage 1 is 21lbs stage 2 18lbs

[@robertgabb1416]

What Micron are these filters that you are using.

[@zephyrguzman6462]

Why dont you take the gas cap off to relieve pressure from said 2nd fuel filter opening???

[@ryanphillips3533]

I'm sorry, but did I hear you correctly when dude said roughly $500 for both??????😮 Man, I've owned 2 titan xd 5.0 trucks since 2016, and I've never paid more than $267 for fuel filters, separator, air filter, cabin filter, oil filter and 3 gal of oil! People be price gouging or what, lol!? Best thing I ever could've done for both trucks is buy aftermarket like amsoil products, rotella t6 15w40 synthetic and I change my oil every 5,000 and fuel filters at 10,000. Trucks have never let me down aside from both needed swingvalve actuators replaced.

[@olddirtyburt7522]

Yeah, 550 for my diesel Nissan. I’ll be doing the rest of them from now on

[@RAR472]

29,000 psi? And that plastic cap holds that kind of pressure?

[@olddirtyburt7522]

That plastic only has lift pump pressure, not rail pressure. It could be 50 pounds. Rail pressure is after this filter.

[@traviscampbell7455]

This is cringe...putting the new filter face down in dirty drain pan and then not even wiping it clean before installing.

[@DoubleTap702]

My thoughts exactly

[@raymondquave2843]

I've never seen one come off that easy, I use a cheater bar an filter wrench to remove mine the socket never works just strips on primary an secondary filter

[@aubreyddavis]

Trying to order the cap for the top fuel filter but can’t find it. Any suggestion?

[@joshuamahan3403]

Nissan no longer sells the cap separately. Z1 off-road has made a billet replacement, that is your only available option other than buying a new high pressure fuel filter housing complete from Nissan

[@DoubleTap702]

The filters don’t get 29,000 psi. Plastic would not hold that. The fuel rail sees those pressures, which happens after the filters.

[@typafford1896]

Top filter doesn’t have a sensor?

[@YankeeinSC1]

29,000 PSI. That would be a cool trick.

[@Leti86]

What size is the socket?

[@kingperfection1868]

29mm

[@joenissan]

Regular oil in an XD? No way!

[@dbel723333]

Amsoil 10w 30 diesal oil all the way. Same with the filter. One more thing I'd add to this video is to lube the new o-rings before you put them on. You can roll them and get air in the system if you don't and the truck won't start for shit. Ask me how I know :)

[@ronkopf7797]

or 1 1/8 inch, same

[@oswaldorangel4676]

You missing more oil buddy

[@oswaldorangel4676]

Oil is almost 3 gallon You're put in 2

[@fattireale75]

2.5 gallons is 10 quarts, he said it right.

[@raymondquave2843]

This video is bull it doesn't work that easy belive me everything is plastic an sucks

[@Hollywoodeatsordrinksit]

How do you prime the fuel filters without starting the truck?

[@zephyrguzman6462]

Turn the truck to ignition II, about 5 times

[@Mretinum]

Just did it - don't be afraid if it warns you about low fuel pressure - just cycle through 5 times and you should be good to go!