How to Replace Fuel Injectors 2012-2018 Nissan Altima (2.5L)

Buy Now!
New Fuel Injector from 1AAuto.com 1aau.to/ib/1AFI...
This video shows you how to install new fuel injectors from TRQ on your 2012-2018 Nissan Altima (2.5L). Fuel injectors are computer controlled spray nozzles that deliver fuel to your engine in precisely controlled volumes. They are one of the keys to modern efficient and clean engines. If a fuel injector is dirty or failing, it can present symptoms such as rough idle, engine surges, rich or lean conditions, and check engine lights. Replacing a problematic fuel injector with an engineered to fit TRQ replacement part right away is essential to the health of your vehicle’s engine.
This repair was done on a 2016 Nissan Altima Base 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/o3Z/1AX...
• 10mm Wrench 1aau.to/o63/1AX...
• 10mm Socket 1aau.to/obvE/1A...
• Needle nose pliers 1aau.to/oGZ/1AX...
• Needle nose pliers 1aau.to/oGZ/1AX...
• Pliers
• Ratchet 1aau.to/obU4/1A...
• Socket Driver
• Torque Wrench 1aau.to/oaX9/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oJi/1AX...
• Gloves 1aau.to/oaHx/1A...
• PAG Oil
• Painter's Tape
• Safety Glasses
• Pick 1aau.to/oWx/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@MH-15411]

Hey guys! I'm a education film professional. First you guys are amazing! Please keep up the good work! Secondly, just a quick tip on the engine view angle. PLEASE DON'T DO THIS UPSIDE DOWN AS DONE IN THIS VID. You're users are not going to be looking at the engine from this angle when they perform the task and this is not a typical view angle of engine bays so this angle feels disorienting and therefore hard to learn from. If you have to mount the camera upside down for whatever reason just flip it in post production and you're good to go. Your stuff is always amazing so please keep up the good work! I'm excited to see future videos!

[@brunopecego5297]

Wow im a little dizzy after watching this. Brilliant idea turning the video upside down

[@MrRusell86]

I have endeavored to change my fuel injectors in my 2000 Corolla. It has been a wild ride with the injectors leaking due to the injector o-rings tearing or getting chewed up. Thankfully, I have a lot of spares and I have gotten better at inserting and lubricating them. I finally managed to get the injectors to stop leaking but then I was hit with numerous low-300 misfire codes plus P0172 (running too rich). I read up on the misfires and the lower seals needed to be lubricated so I used Vaseline. No more 300 codes but I still have P0172. LTFT goes down to -26%, which is quite ironic considering I've been dealing with P0171 for the longest time. The car idles softly like it may sputter out when I drive slowly or stop I assume this rich condition is from all of the excess fuel that went into the cylinders/engine from dealing with the recurring leaks and lifting the rail up and back so much and gas going into the port holes. It's not like it was a water hose or anything but still a decent amount over time as I couldn't run the engine with the injectors leaking. Will this rich fuel condition work itself out with the engine drying on its own the more I drive or what can I do?

[@eugeniaderice702]

I need this same video of replacing fuel injectors on a 2003 Nissan Altima 2.5s. I'm having issues getting to the fuel rail on the 2003.

[@KJayJr]

If you could do this for the previous gen ( Nissan Altima 2007-2011) that’d be perfect. I thought it would be similar to this but I see Nissan made a few slight alterations to things under the hood

[@russ4550]

What's the point in pulling a fuse and putting it right back in

[@mandadollas5054]

tysm very straight forward!!!

[@TRQ]

+@mandadollas5054 Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@rejurp4278]

I did everything but the rail is not going back properly. Not able to fully push inside. Please help

[@matthewjalbert8099]

Does the Altima share the same engine as the Rogue? I have the 2016 Nissan Rogue looking to change an injector. Would this apply to that as well? Thanks!

[@robotzbuddy3699]

When you remove the hose and say it shouldnt be stiff what do we do if its stiff and cracking