√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@Mushroomhaus00016 ай бұрын
Thanks for the video. I should’ve had it done in 30 minutes but it never goes that way. Took me about 3 hours total. Some tips for anyone tackling this: - the punch and hammer is very useful. Spend the $10 on a large brass punch from Harbor Freight or something. Trust me. - even with a punch it might be difficult to get the ring off. Just keep trying. Hit it on the shoulder with the punch and hammer, not the longer part on the ring. You’ll be able to make more force by hitting it on the shoulder. Hitting it on the longer part pointing backwards will bend it but you can just bend it back when you get it off. - Pulling out the pump is frustrating. At some point after trying for 30 minutes, I just decided to pull up very hard and it finally came out. Spilled a bunch of fuel but mine did not come out as easily as the video. The replacement pump is much easier to put in. - yes, needing to push down on the pump to install is normal. You’ll need to use some amount of force to push the spring down. - reinstalling the ring: apply some silicone grease to the contact points of the metal ring, top and bottom. Just use a very thin layer all around. Makes reinstall of the ring a breeze as it slides right on with each tap. Wipe the silicone off the top once you’re finished so it doesn’t attract dirt. But there should still be some silicone under the tab itself, which means if you ever need to take the ring off again, it’ll be way easier than this time! Good luck!
@jeffreybraley7294 Жыл бұрын
Fixed my daughters FP in about 20 minutes because of this video. Thank you for posting!
@maggieward89133 жыл бұрын
I don't need a man when I have youtube, thanks brother!
@papitas28434 жыл бұрын
Nice explanation and great camera work! One suggestion: how about taking a vacuum and some rags to the surrounding area(s) prior to removing the lock plate to limit the amount of grit & grime that could potentially fall into the fuel tank and create more work for the filter? Just a suggestion.
@6543213894 жыл бұрын
Exactly..blow out all the dirt and clean it up before you take anything apart.
@Cola644 жыл бұрын
Let me just say You made that look easy ! i was going to rent a jackhammer at one point than a miracle happened right after I finished rolling around in my driveway crying like a 3 year old on the play ground I figured one last tap before i call the tow company to take it to the junk yard and Bam ring came loose 🍼🍻 now onto the compressor 😫
@vincentcoelho2 жыл бұрын
Very professional. Every detail was covered on a well done video. Thanks
@sylvainguinepain56246 ай бұрын
Great video! Very clear. The price estimates online for this job vary widely from $150 to $1.500. Given than the part costs about $50, there is no way the whole process should take more than 2 hours and cost more than $200.
@fallofthezombies13794 жыл бұрын
The way he says vehicle totally kills me. Good job guy.
@MegaHugro4 жыл бұрын
Well done and excellent suggestion to use a brass punch to avoid sparking.
@edwinsmith66909 ай бұрын
I liked your video. You spoke plain english which made it very easy to understand. I also liked the way you would say hookey do's
@Jsart872 жыл бұрын
Great video. This doesn’t seem crazy intense. Why does Nissan want to charge me $900 for a 30-40 minute job?
@Tommy_Mac2 жыл бұрын
Great video! This video also applies to the 2010 Maxima (7th gen). I used a spray bottle with a little soap mixed in water and a shop vac to clean up the area around the sender. I also disconnected the fuel pump electrical connector, started the engine until it stalled. I sprayed some wd40 on the lock ring for disassembly, used a bit of silicone grease on the seal (to keep it positioned) and lock ring tabs when reassembling to make it easier. Ezy peazy.
@TRQ2 жыл бұрын
+TommyMacDaddy1 Thanks for the feedback! 1aau.to/m/Shop-TRQ
@AutoMotivate3 жыл бұрын
Hey! you are from 1AAuto! Im glad you decided to do this on your own!
@Mikhail.B.Sidorov2 жыл бұрын
Nice, clever, step by step clear explanation - the best what i could see!!! thanks, good luck!
@abeltarango5832 жыл бұрын
Learned a new mechanic term, hookydoo. This is a great video. Saved me a ton of money and time.
@kaddis013 жыл бұрын
Bigger punch and bigger hammer. Got it. Many thanks!!
@805fishing94 жыл бұрын
Good video simple and to the point
@kimberlyevans76622 жыл бұрын
You are absolutely awesome !! Thank you so very much! I couldn't have done it without you !!!
@cocolokcocolo1363 жыл бұрын
Your are a great teacher sir
@TRQ3 жыл бұрын
+Cocolok Cocolo Thanks for watching our video! 1aau.to/m/Shop-TRQ
@joserivera-vs7kw Жыл бұрын
Great exponatikn how to do it...this how many need to start a video going to the point ..good job..God bless you..
@joserivera-vs7kw Жыл бұрын
great way to explain how to do it,god bless you
@ravileos12 жыл бұрын
I followed your instructions and after installing, it cranks very long and never starts. Can suggestions greatly appreciated, right now cannot do anything. FIX: I used Delphi FG0986 for Altima 2011, the plug and connector didn't snap in completely I have to push it hard. Thanks to one reviewer in Amazon. However check engine light is still on, will drive some miles and update again
@brandiw7522 жыл бұрын
How’s it going now?
@prestonreynolds46049 ай бұрын
I bought your brand of fuel pump for my vehicle and it didn’t work, I have tried 1 other aswell and they both haven’t worked, I didn’t everything in this video and yet it always fails to start after a replacement. Do I need to prime the pump at all? Or is there anything I could be missing?
@prestonreynolds46049 ай бұрын
When I put the original pump back in, it runs but not well
@selfdefender8609 Жыл бұрын
Thank you for the time I saved!
@randymarsh7233 жыл бұрын
Loved the video, Just replaced mine, but not it’s not starting or cranking
@TRQ3 жыл бұрын
+randymarsh723 Thanks for checking us out!
@shamrock323 жыл бұрын
Did you go figure it out?
@blacknightassassin542 жыл бұрын
Lmfao they gave no fuks
@edwinjacobo41122 жыл бұрын
Relearn reset procedure
@thomasmoreland5749 Жыл бұрын
Loved your video. Without it,I would have tried to drop the tank.😂
@jamesgodde21452 жыл бұрын
Excellent video.
@ethanburr943 Жыл бұрын
The fuel filter is also in that fuel pump kit correct??
@andredobbs5390 Жыл бұрын
Very educational and informative. Thank you. I think I'll subscribe now
@ThomasDeLello7 ай бұрын
Question: Is the Fuel Filter built into my fuel pump of external to it...? 2008 Nissan Altima.
@renegarcia65694 жыл бұрын
Lol my boy jumped ship from 1A Auto 😂
@weirdplasticlabsАй бұрын
Lolololololol. I said the same thing when i started this video
@axelbalderrama1415 ай бұрын
Do those fuels lines have a gasket in them because mine is leaking from the one with a blue clip
@macetherebel7337 ай бұрын
Now what if you did everything step by step. But your gas light comes on when it's gas in the car? What would cause that error?
@AntonioMartinez-du8ps3 жыл бұрын
Do you know where the pump is on a 2010 altima coupe?
@24KGoldbackGorilla7 ай бұрын
Do you have to relearn the computer after disconnecting the battery?
@WV591 Жыл бұрын
Are these TRQ pumps reliable?
@dannyzoto15313 жыл бұрын
What is theres a slight whistle sound after turning car on ?
@Cola644 жыл бұрын
Great videos Very informative 🤙🏻🍻
@apostasiaelegcho56122 жыл бұрын
Is the fuel filter inside the fuel pump assembly? I can't find a fuel filter anywhere on this car, and I'm getting a message on my screen that I need to change the fuel filter.
@asgharkhan54014 жыл бұрын
Excellent job
@billyraysmithuploadyours7514 Жыл бұрын
that was good with no playing & bull shat thank you sor in jesus name a men
@joshuapyfer66162 жыл бұрын
So I got some dirt and stuff in my gas tank when I took out the fuel pump, should I be fine?
@mytomtv35003 жыл бұрын
Excellent video
@TRQ3 жыл бұрын
+thomas mensah Thanks for watching our video! 1aau.to/m/Shop-TRQ
@m4gpex2473 жыл бұрын
That was easy wow i paid 945 on nissan dealer on my 2009 nissan altima yesterday 😭
@jyriancrosby68783 жыл бұрын
What problems were you having with your car?
@erikmaldonado2463 жыл бұрын
Any one know where can I get one of those brass punch? Thanks.
@jorgepizarro33272 жыл бұрын
Try Amazon, Lowe's or home Depot. Honestly, I would just get a copper pipes different widths and lengths and have them cut it to the sizes you need
@davidwalker27813 жыл бұрын
Which hose in the video is the Fuel OUT hose,...and which hose is the vapor hose, back IN.??
@tuco24212 жыл бұрын
Thanks
@JerryGsr2 жыл бұрын
Good video brotha
@bergfeldian3 жыл бұрын
THANK YOU.
@brucemccallister78922 жыл бұрын
Excellent description. Would it hurt anything to spray lubricant like WD 40 on the lock ring to make it easier to remove and reinstall?
@jorgepizarro33272 жыл бұрын
No it wouldn't hurt
@phenkiller17-5dsa9 Жыл бұрын
So what if the car won’t start at all. will the pressure still be released when trying to start the car?
@nathos1344 Жыл бұрын
I'd like an answer to this too
@opaulofranco3 жыл бұрын
How to know if I need to replace the fuel pump? I have a Altima 2010 2.5, and it is making only 5km per litre (like 13 miles per gallon). I am thinking about cleaning the injectors, but I am not sure if it would be enough, as the Altima can't be serviced by changing the fuel filter since it is part of the pump. Opinions? Thanks!
@nihil52222 жыл бұрын
My 2011 2.5 has a bad fuel pump. Usual symptoms are rough idle/hesitation and no power upon acceleration. My car won’t even get up to 20mph with full throttle up a hill and I can hear the pump when I turn the car on. I used a fuel cleaner first and that helped out somewhat but either way that pump needs to be changed. For your case, if you are experiencing any of the problems I listed then a pump it probably required. If not then you may need a tune up or it could be your driving style
@aco34952 жыл бұрын
Hello thank you for the video, would you happen to know why the fuel filters prices range so much? For example for the link and filter you provided it is less than 100 whereas my local autozone told me these filters range to upwards up 600 dollars
@trecef50752 жыл бұрын
Autozone makes their money by overpricing their parts.
@shonahenderson80342 жыл бұрын
Yo! I literally just left AutoZone and was quoted $400 brand-new lifetime warranty or a refurbished one for $185 with 1 year warranty. I'm going to the picknpull
@ilahall5583 жыл бұрын
What size is the brass punch
@olguiq101311 ай бұрын
🤗... I ❤ Lenny
@ChevyC-jo9pw2 жыл бұрын
I can't seem to get my back seat out, I pulled both pull tabs and NOPE will not come out
@gregoryparelli15262 жыл бұрын
I'm having a problem putting the ring back in place
@ilahall5583 жыл бұрын
Where can I get the brass punch?
@surgeyeyo36354 жыл бұрын
Has anyone had a problem with a small air leak?
@Cola644 жыл бұрын
Sergio Hernandez it sounds like mine leaks to but i think its just my aftermarket pump is just more noticeable in sound
@wptyler17 Жыл бұрын
What can I If pump won't come out
@rexeater143 жыл бұрын
He never put the fuse back 😳
@jpproductions12k3 жыл бұрын
He did in the beginning
@clydetrump2654 Жыл бұрын
He put it right back in after he removed it
@JD-bq1vy2 жыл бұрын
5:33 ( installation )
@xyero43993 жыл бұрын
That battery is corroded to hell.
@TRQ3 жыл бұрын
+Xyero Thanks for watching our video! 1aau.to/m/Shop-TRQ
@JawadKhan-hz9sc2 жыл бұрын
It probly cost you less the 5cents to include new fuel line clips but thats too much to ask for
@jean-mariegelineau99863 жыл бұрын
Allo
@OLIVER949OC2 Жыл бұрын
Don't do it on a full tank! And check b3fore you put the cover back on for leaks