√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@christianguajardo61383 жыл бұрын
My fuel pump didn't co.e with a harness
@harleydavis40632 жыл бұрын
I was told I had a filter with the fuel pump is the screen supposed to be the filter or what and $200 is a little high what is your price
@harleydavis40632 жыл бұрын
If I buy the fuel pump from you how much would it be? Reply please
@jordanteraza9174 ай бұрын
Just did this and it worked great! Symptoms I had: Long crank eventual start on 2nd or 3rd try Loss of power Loss of acceleration Intermittent fuel loss Crackle/pops After new pump installed: Fires up right away first try every time Truck drives like a dream Quick fast acceleration I dropped the tank from the ground but my truck does have a 5 inch lift and 35 inch tires on it. If you have an extra hand it will definitely come in handy. I used my jack to relieve pressure on the tank to get the straps off
@christopherrobinson2962 жыл бұрын
Thank you so much for actually taking the time to show us how to do it from start to finish, Very much appreciated bro!! Your one of the good guys👍🏻
@steadyeddie74532 жыл бұрын
More on Dodge Rams- Take note of the position of the old fuel pump before removing, and install the new one in same position so the gauge float doesn't hang up. With the old pump out, empty the tank. It may have water and sediment left in it that can ruin the new pump. If the plastic fuel line has a foam wrapping be sure to reuse or replace it otherwise the fuel line may rub on the frame rail or the underside of the bed. The black valve is a vent/rollover valve. It vents the tank to the evap canister through the black hose. The smaller black hose on the metal filler neck aids in filling the tank. It acts like a vacuum break. The metal filler neck also has a rollover/anti-siphon valve in it. Don't overfill the tank when refueling. You can cause raw fuel to travel through the vent valve and saturate the evap canister, which will lead to the charcoal in the canister to be sucked into the purge valve near the engine. Tanks for the video.
@matthewlytle7753 Жыл бұрын
I've seen alot of maintenance videos on KZbin and you nailed it! This video is extremely informative and in-depth, not to mention the little tips here and there to make it easier
@grantmcinnes1176Ай бұрын
So satisfying to see someone work underneath a car the way they actually look :)
@MrAcer4 Жыл бұрын
The way I do this is. I loosen the four bed bolts. And Jack the bed up from the front end. Gives enough room and easier in my opinion
@eugenemay23702 жыл бұрын
Thank you brother this is what I needed I just got the tank dropped and I using your video for reference the entire time! UPDATE: Got it fixed and now she's purring Thanks again brother.
@TRQ2 жыл бұрын
+Byrl May Thanks for watching our video! 1aau.to/m/Shop-TRQ
@rickeyyunk71172 жыл бұрын
Can you show me how the fuel pump goes together
@rickeyyunk71172 жыл бұрын
Can you show me how the fuel pump goes together
@rickeyyunk71172 жыл бұрын
I fuel pump is all apart can you show me how it goes together
@MohamedANegm8 ай бұрын
I’m doing this as soon as your part arrives. I’m going to be honest your part was about $80 cheaper than autozone and comes with this video! What a deal! Luckily for me I took my bed off. All I got to do is follow this to install the new one in and then figure out how to put the bed back lol. Wish me luck!
@wasillastacker5 ай бұрын
Thank you for the info dude I'm fixing to put a fuel pump in my truck this morning
@bigemarin92713 жыл бұрын
I'm doing this on the ground with a regular car jack wish me luck I'm having trouble lifting it up so here goes
@ShermX69X3 жыл бұрын
It's been 4 days so we're guessing it fell on you... R.I.P.
@damiengarrett7691 Жыл бұрын
How did it go I’m about to do the same thing
@teriyakigod25272 жыл бұрын
always posting amazing videos TRQ you have helped me and my 2nd gen ram 1500 for the last two years!
@vernonfields4182 жыл бұрын
Hey when I put my tank back up, I can't find the evap hose. Anyone have this issue?
@energymd2 жыл бұрын
Dude you make this look so Easy,I will be doing mine on a 2002 Dodge ram 1500 after watching this video 👍
@dmontrose74462 жыл бұрын
Always a concise to the point yet thorough video. Nice job! Thank you!
@larryhyatt16763 жыл бұрын
This is one of the best instruction vidios out there Thanks.
@marconavarro28033 жыл бұрын
Best video I’ve seen for installation!!!! 🤟🏽👍🏽
@firearm.obsessed81423 жыл бұрын
A mechanic that sounds like a chef
@patcastaldo39898 ай бұрын
wow in these videos they do a nice job , and also they make things look sooo easy , these videos are sooo very very very useful , thank you .
@MeloneKidd2 ай бұрын
Absolutely beautiful video great job explaining abd showing step by step and explaining why as you go according to efficiency and safety
@Voiceman1113 жыл бұрын
When you put the new locknut on (manufacturers highly recommend replacing the locknut and gasket), you'll want to use a spanner wrench, then you won't have to bash it on. You can borrow one from an auto parts store.
@marcdorizar57423 жыл бұрын
good videos i like the way you explain every little thing. thanks a lot.
@normhowes2975 Жыл бұрын
I think it's going to be easier to cut a hole in the box than remove the tank. And of course they are calling for 1 - 2 foot of snow tonight. Thanks for the video, l learned more about the pump location on my plow truck.
@Big-Hit2 жыл бұрын
I have a 1992 dodge ram 250 van would this set up work on my van? Thank you so much for taking the time to help us out.
@MaritimeKid3 жыл бұрын
Not sure why you didn't remove any gas that may be in the tank and clean the tank out. Otherwise, great video with complete explaination.
@TRQ3 жыл бұрын
+Phil Neathway Thanks for watching the video! This would be good to do if there is any debris in there or for just a general maintenance procedure. 1aau.to/m/Shop-TRQ
@berad1872 жыл бұрын
I have a 99 dodge ram Laramie SLT with a 5.9L magnum v8 appart from replacing the fuel pump would it or is it ok with replace the fuel pressure regulator instead of replacing the fuel pump?
@olikat83 жыл бұрын
Holy S that thing is crusty! Not an ounce of undercoating on my '95 and it is perfect underneath. Reminds me why I am glad I don't live in the rust belt
@ffhjvbuydb78eb Жыл бұрын
Kinda looks like mine. I think mine is a bit better though
@derrickjohnson4475 Жыл бұрын
I would like to say although my SLT 4.7 Magnum was a little different but man wouldn’t have even got there without ya
@melvinrhinehart7756 Жыл бұрын
Thanks for all the details that you navigated us through. Just a question though. Shouldn't the gas tank be flushed of any trash that may be accumulated inside the tank over years. Thanks.
@slowmotionperformance27442 жыл бұрын
His vids are always A1
@romanprice42235 ай бұрын
So in your video, the connector piece that has the red clip was not damaged, but do any of you have an answer on what to do if it is or how to solve that issue
@gageholmes82662 жыл бұрын
7:22 What if your fuel send unit does not have that hole ?
@abumzbum1869 Жыл бұрын
My fuel economy is really bad and getting worse, would you suggest that by replacing the fuel pump it would help gain fuel economy again? Thanks
@ibrahimalzaabi91183 жыл бұрын
7:17 the part called for this hole is the “Fuel Rollover Valve” right?
@generaltso7623 жыл бұрын
Yes
@bullheadedoldtimer12563 жыл бұрын
I purchased a pump for my 95 dodge dakota, 3.9, its a five"round"pin, I need the 4 flat pin like you have, its identical to the original one that I'm trying to replace.
@TRQ3 жыл бұрын
+bullheadedoldtimer Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ
@samestis6263 Жыл бұрын
Great job very well done. Thanks for the video.
@julienbamba94339 ай бұрын
Nice 👍 easy and simple,
@antoniomeza3957 күн бұрын
I just put a new fuel pump on my 2 gen and it doesnt show how much gas in the gauge. Plz help
@sergiozamora31813 жыл бұрын
Are trq fuel pumps good how long can they last?
@Name_______ Жыл бұрын
So I have a 02 ram 1500 5.9 L. The fuel pump is fine but one of the electric connectors is coming loose causing the fuel pump to stop working. I've heard this is a common issue with these trucks. Do you have any idea of the problem?
@norcalmud3253 Жыл бұрын
What happens if I made eye contact with him while watching his video is he still gonna steal my soul? Asking for a friend
@mikecarr20853 жыл бұрын
I did one on a 92 dodge Dakota and I just took the bed off the truck and changed it in 20 minutes. Can you not do that on a 98 Ram 1500?
@josephtate1683 жыл бұрын
That what i did on my 1999 dodge ram . faster , no crawling around if you don't have lift ,same on 06 Silverado . i have done 6 in day . at 300.00 . at my brothers garage .He got lift but taking bed off is faster , I just raise it enough to work on it , stick the new one in , yes it better and faster
@coconut_milk71678 ай бұрын
I have a problem where I have power at my plug but when I plug in the adapter I lose power and the pump won’t kick on
@mountainwolf1 Жыл бұрын
😆😆 he said hookie doo's. Thank for the advice and the laugh👍
@gott_btheflo89074 ай бұрын
I ordered a fuel pump and it didnt come with the gasket or the plug it just came ith satin paint?
@osiris122cf Жыл бұрын
What is the black thing on the top left of the pump that goes to the EVAP line what's it called
@dewdrop3009 Жыл бұрын
Do the 1994-96 models have roll over valves. Everytime i search for one it says it doesn't fit
@user-mz9sh2bz9h3 жыл бұрын
Good job
@TRQ3 жыл бұрын
+محمود شبيب Thanks for watching our video! 1aau.to/m/Shop-TRQ
@ryanram-10business7811 ай бұрын
Can I use a universal fuel pump
@waiting4aliens3 жыл бұрын
at 3.25 is the black hose removed a vent hose? Or a vent rollover valve?
@steadyeddie74532 жыл бұрын
The valve is a rollover valve but it also vents the tank. The hose attached to it connects on the other end to the emissions evap. canister. And btw, there is also another rollover valve located in the filler neck. Some call it an anti-siphon valve.
@chrispeters44052 жыл бұрын
good tutorial
@jtw85162 жыл бұрын
Thank you 😊
@carterhummel95423 жыл бұрын
How do you know if it's your fuel pump or fuel pump module?
@olikat83 жыл бұрын
These Rams are all module
@theratedrtransformer8890 Жыл бұрын
Could someone help me by telling me where i can get the rubber o ring that the fuel rollover valve at 5:20 please
@TbirdThunderHD3 жыл бұрын
7:53 You'll never know your fuel level again because you didn't install the float level indicator?
@user-bm9rb7yk7z3 жыл бұрын
It's at the backside of fuel unit.
@colt8282 Жыл бұрын
It’s easier to take the bed off then drop the tank. But good video
@louisgranado87993 жыл бұрын
what size socket required for the forward knot and bolt
@b2b5452 жыл бұрын
will this work on a 2004 ram
@danielariasola46832 жыл бұрын
Anyone know the location of the fuel filter on the 2002 Dodge Ram 1500 4.7?
@coronapack3 жыл бұрын
jesus the rust
@ryurc30332 жыл бұрын
Thats nothing, every once in a while I run across a tahoe or 4 door chevy truck that rust accumulated in the crossmember that holds the strap, nothing makes you feel more alive than having to cut rusty straps off, and fabricate new attachment points, because you already cant get the tank back in, and your boss told the customer it would be done by noon. 100% why I quit being a mechanic. Book time only works if the car isn't a rusty pile of crap.
@kayastancil86319 ай бұрын
You forgot to mention anything about the fuel level sensor):
@grassfpv18763 жыл бұрын
I just replaced my fuel pump, and it's still not starting, and thr little button to release thr pressure, there's no pressure building
@sergiozamora31813 жыл бұрын
Check your fuses or relay if not then eletrical issue can be a pain to look for
@jordanadamowicz85132 жыл бұрын
hookeydoos.. love it
@tibtb6586 ай бұрын
Looks like that truck ready to break in half
@TravelAnthony2 жыл бұрын
Could I remove the bed?
@indiehandstudios57112 жыл бұрын
i replaced my pump and its still not enganging when i turn my key
@beaznuts2 жыл бұрын
what is the hose @ 3:32
@michaelg.13052 жыл бұрын
can anyone tell me whats the name of the smaller hose at 10:45 .I know the bigger one is filler neck hose. thanks
@dybamx2 жыл бұрын
it is a vent hose
@steadyeddie74532 жыл бұрын
The smaller hose attached to the metal filler neck aids in filling the tank. It is not a vent hose. It works similar to a vacuum break.
@efrencampos94942 жыл бұрын
where is the fuel filter?
@pvb876287 Жыл бұрын
geekeo
@joshuastrong88202 жыл бұрын
So is that the fuel filter I didn't find it outside the tank I am really hate hate hate dodges
@freddyhernandez48493 ай бұрын
Muchas gracias amigo. Tu video fue de gran ayuda!
@luisjorge61572 жыл бұрын
👍
@jimikrentkowski4073 Жыл бұрын
Oops! I broke the fuel line into regulator🤦♂️
@xXDjBlareXx3 жыл бұрын
Couldent you just remove the bed?
@grc56183 жыл бұрын
That's how I did mine
@tylerokrane98323 жыл бұрын
Going to get my truck now I caved and took it in i dont take anything in but iam on the road and been scrrwing arpund with it sometimes 9 hrs a day remember on the road so past couple months its ran good then bad. So I really got to know my 95 ram318 these crooks want To charge me 1200 plus tax so about 1400 to do a fuel pump .i said to the guy 6 fkin hrs to drop a tank. Change. Pump and put it back up what are you guys doing this. Well battling off crocodiles riding sharks with fking swords man o can do it in a parking lot half the time
@jaycast1386 Жыл бұрын
Old rockauto videos
@tylerokrane98323 жыл бұрын
So thats what Iam going to do thats a lot of beer money and more
@taylorwyant77093 жыл бұрын
Quit using chrome on impacts geez
@tylerokrane98323 жыл бұрын
Good video man but is that kinda detail needed or is that protecting your self. Im just thinking anyone tackling a job like this you either are knowledgable or you probably wouldnt be doing this at all i could be wrong to just me being a Dick I guess but well done anyways