How To Replace Gear Shift Indicator Light 06-11 Ford Explorer

[@HomeownerRepair]

Shop Our Amazon Store: amzn.to/328JhQV

[@erikrathgaber1236]

Thanks for this. Mine has been out for years and I've just lived with it. Got the part and switched it really quickly thanks to you.

[@HomeownerRepair]

Glad it helped

[@mezcaliber1124]

Thanks man. Ford quoted me $250 just to remove the panel and replace the light. Just did it for $5.00 (lights) in 20 minutes.

[@HomeownerRepair]

Glad this helped you out..what a joke.

[@deborahtrapasso5688]

Video was thorough and incredibly helpful to a novice. Successfully replaced the light bulb after a month without it. Kept my laptop on the dash throughout the repair and referred to it multiple times. Listen to all the helpful hints that will avoid any other parts breaking in the repair process. Obviously an expert repairman! Since I plan to keep my 107,000 mile 2008 Explorer as long as possible, I subscribed to this channel. 🙂

[@HomeownerRepair]

Thank you for watching our auto repair video that shows you how to replace the gear shift indicator light on a 2006-2011 Ford Explorer. Have a great day!

[@curtsilva4391]

Appreciate your video! Watched it and then installed the new mini bulb. Your video is spot on, and it does take a little finesse with turning the bulb socket to locked position when installing.....tight quarters. Nice to have the light back on.

[@HomeownerRepair]

Glad it helped

[@isaakbean9101]

Wow I really appreciate this, I had my 06 Eddie B edition shift light go out so I watched your video after fords quoted me $759.78 to repair the light so I took the light out of an 08 xlt explorer sitting in my pasture, again thank you! Saved me almost a thousand dollars !

[@HomeownerRepair]

That is RIDICULOUS! Unreal!

[@dayop.6345]

I just fix this in my car with your video, Ive been using a flashlight for a year now! Thank you very much! ❤😊

[@HomeownerRepair]

Glad it helped!

[@cdub3088]

I just used this video to replace mine today. I didn't even realize it was out until I saw your video and went out to check and it was out. Did the repair while I was in the console replacing another part. Thanks for the accurate bulb information. My bulb came out and went in VERY difficult though. Thanks again!

[@HomeownerRepair]

Glad I could help!

[@ziggyz2958]

Thanks man! Your video is a perfect step-by-step procedure, complete with bulb type! I will be doing this on my 2007 Explorer, which coincidentally has the same interior as yours.

[@HomeownerRepair]

Thanks for watching! Don't forget to subscribe!

[@TheRealCardz]

Thanks for the vid from detroit. I replaced my bulb and dashboard bulbs. 2 separate vids. I did the shifter bulb in like 10 minutes!

[@HomeownerRepair]

Glad it helped

[@keithlabumbard]

Thank you for having this video available! I had a problem where the gear shift indicator light was intermittent. After swapping the bulb out, the display is as it should be with no problems. Thank you for helping me to save a bunch of money and teaching me something new.

[@HomeownerRepair]

Glad it helped

[@Miami_mErkstEr]

Thank you very much watched your video and I changed mine like a pro 😊

[@HomeownerRepair]

Glad it helped

[@steveandkristalsmith8460]

Thanks for taking the time to post. It was exactly what I needed. Hardest part is getting that bulb back in by touch alone.

[@HomeownerRepair]

Glad it helped

[@TheScenario303]

Great video. Thanks to you I can shift a lot easier at night

[@HomeownerRepair]

Glad to help

[@jamescarter8699]

THX Guy! Yes I have that problem. Mine a "2010 explorer". My truck is loving these self-fix videos.

[@HomeownerRepair]

Thanks for watching

[@peggyoleary621]

Thank you so much. Great video! It helped me a ton! This problem is not only annoying, but could be a safety issue! I know how to fix that problem now!

[@HomeownerRepair]

Glad it helped!

[@scottd7222]

Thank you. I have this same car. Just replaced the starter at 140000 miles. I'll be doing this next!

[@HomeownerRepair]

Hope this helps you out. Thanks for watching

[@doomguydude]

Thank you so much bro for uploading the video. Now I can also able to change my gear blub easily.

[@HomeownerRepair]

Glad to have helped, thanks for watching!

[@tizo007]

Thank you. It worked!! Your video helped me to fix the light.

[@HomeownerRepair]

Glad it helped!

[@jeffwright7588]

I used your video for my 2010 Ford Sport Trac, exactly like your video showed. No problems at all. Thanks ...

[@HomeownerRepair]

Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.

[@jwon_lee]

I got the shine back thanks to you! This is amazing

[@HomeownerRepair]

Great to hear!

[@shelleyskrepnek5398]

Thank you. Now to see if I can do it myself.

[@HomeownerRepair]

Glad our Ford Explorer video that shows you how to replace the shifter light bulb helped you out. Have a great day!

[@dadsc10]

omg thanks, i have a 2009 mercury mountaineer , this drives me crazy lol, im going to replace the bulb tomorrow :) Thank you

[@HomeownerRepair]

You're welcome!

[@vaughn8404]

Thank you man, mine been out since I purchased this vehicle I didn't even know they came with light lol

[@HomeownerRepair]

Glad I could help

[@ice_ryda]

Just what I needed. Thank you.

[@HomeownerRepair]

Thanks for watching!

[@JohnnyDont]

Thanks for the quick vid man. Just replaced my wife's PRNDL light in secret to see how long it'll be before she notices 😂

[@HomeownerRepair]

lol..another one fixed! Thank you for watching our auto repair video that shows you how to replace the gear shift indicator light on a 2006-2011 Ford Explorer. Have a great day!

[@realemiele.franco736]

Thank you sir for showing us this video. Looks fairly simple. My 2007 Explorer Sport Trac has the same setup. I'm Washington state and yes it's a bit of a pain not knowing what gear you're in especially at night. Much appreciated, will be changing mine soon. 👍🏼

[@HomeownerRepair]

Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.

[@gordonreeder3451]

Bulb type 2721. Got it. You are right, trying to find that information is like finding the Holy Grail. Thanks.

[@HomeownerRepair]

Glad this helped you out.

[@nicolemazurkiewicz5377]

Wrong. 2721 is the model for specific brand. the Bulb specification and size is t5 or W2x4.6d. Simply search for T5 bulbs.

[@joelrivera4792]

for your video can change my focus. Thank you !!! For explore 2006

[@HomeownerRepair]

Glad I could help!

[@msmkay5457]

thank you sir, mine went out this evening i didn’t know what was wrong lol

[@HomeownerRepair]

Thanks for watching. Hope this helped you out.

[@jerryrigsit5400]

Thx, I was thinking the knob had to come off. Now I know

[@HomeownerRepair]

Thank you for watching our auto repair video that shows you how to replace the gear shift indicator light on a 2006-2011 Ford Explorer. Have a great day!

[@AKOMADAYHoliday]

You helped me tremendously.....I have 2007 Mercury Mountaineer

[@HomeownerRepair]

Glad this helped you out.

[@estevan6970]

Thx man i was having same problem and now light shifter working again

[@HomeownerRepair]

Glad I could help

[@randomletters2948]

Thank you for the video. It is very helpful and informative. The only thing I would recommend is not touch any bulb with bare fingers. The oil from your skin will cause hot spots on the bulb and shorten its life. Use a paper towel, napkin, etc, or disposable gloves.

[@HomeownerRepair]

I really appreciate your kind words and the helpful advice! Thank you for contributing to the discussion!

[@mr.2cents.846]

Good job. Thanks for uploading. I am dreaming of a 2010 Sport Trac Adrenalin with V8, 4WD and Navigation package. And in lightning blue. 🔵

[@HomeownerRepair]

Thanks for wathcing.

[@CLIFFORDHENRY2012]

Great video

[@HomeownerRepair]

Glad you enjoyed it

[@Nick-1117]

OMG THANK YOU SO MUCH!!!🎉

[@HomeownerRepair]

Thanks for watching! Don't forget to subscribe!

[@myzteziz9]

Amazing Video thank you 👏🏻

[@HomeownerRepair]

No problem 👍

[@escogt50]

Thank you!

[@HomeownerRepair]

Thanks for watching! Don't forget to subscribe!

[@neilharness3662]

Just followed your video for my 2010 expedition. Your description is perfect. Got the bulbs from ford. Replaced them but unfortunately it’s still not lighting up. Do you think it’s a fuse? Everything else in the car works

[@neilharness3662]

It was the #10 fuse. 15 amp

[@HomeownerRepair]

Ahh...Glad this video helped you out. Have a great day!

[@JavierJaurez]

Thanks man

[@HomeownerRepair]

You're welcome. Thank you for watching our auto repair video that shows you how to replace the shifter light bulb in a Ford Explorer. Have a great day!

[@a-ahad]

Thanks man, this was helpful. Would it be possible for you to show how to replace led behind the AC/fan knobs, right below the deck? Does that part have 1 led or 2, because my right side (AC knob) is lit up but left side (Fan knob) is dead.

[@HomeownerRepair]

Thanks for watching. I will keep this request in mind in the event that we need to make this repair in the future.

[@rogerdrinks9831]

Thanks guy

[@HomeownerRepair]

Thanks for watching! Don't forget to subscribe!

[@mikelore1633]

Thank you

[@HomeownerRepair]

You're welcome

[@luvzpln]

Thank you !!!!

[@HomeownerRepair]

You're welcome!

[@lilibetha2899]

THANK YOU

[@HomeownerRepair]

Thanks for watching

[@gracieknaphus]

Thanks!!!!

[@HomeownerRepair]

Thanks for watching! Don't forget to subscribe!

[@granttaskerud5367]

Thanks

[@HomeownerRepair]

Welcome

[@oliviogil-ws2np]

thanks to much

[@HomeownerRepair]

You're very welcome! I'm glad you found it helpful.

[@SweetPea1970]

Ok, the gray part above the console cover and below the black radio face, is that separate for the black part? i bought the same year and the left side of the area is messed up. I would like to take it off to repair it. 6:39 minutes

[@HomeownerRepair]

You might have to.

[@johnrichardcubidesrojas8398]

Excelente muchas gracias 👌

[@HomeownerRepair]

Thanks for watching

[@henrylozada1525]

Excelente!!!!

[@HomeownerRepair]

Thanks for watching

[@casa5104]

Thanks 👍👌

[@HomeownerRepair]

No problem 👍

[@thereal1loudmerc335]

I've been shifting my mountaineer without that light for years, lol! I'm just wondering if the same 2721 light bulb as an LED can fit up in there? Might be too big.

[@HomeownerRepair]

If it is around the same year it should be the same.

[@billboudreau6512]

Good info Tony How do you upgrade halogen bulbs in the rear on 2007 Ford Expedition ?

[@HomeownerRepair]

To upgrade the taillight bulbs on your Ford Explorer, you should ba able to buy and replace them with LED bulbs. It should be a direct replacement.

[@briannabrianna5248]

Hello could you tell me how to remove the gear shift knob itself or upload a video please and thank you!!

[@HomeownerRepair]

I'll keep this request in mind in the event that we need to perform this repair.

[@DavidHernandez-dr8qy]

I have a 2007 Ford Explorer Eddie Bauer I bought the 2721 and it is bigger than the one that was already in ? Is there a different size the 2721 doesn’t fit

[@HomeownerRepair]

Not sure, it's a pretty small bulb. The dealer might be able to tell you what it has.

[@GodStang03]

Some people said a 74 is the correct size so I think Ford used two different sizes.

[@beronicabarron2564]

I have a 2010 ford edge the shift gear light sometimes turn on what can it be? Do I replace the bulb?

[@HomeownerRepair]

It might just be loose in there.

[@donaldpowell6182]

How do you replace the instrument cluster light where it shows the speed odometer and rpm

[@HomeownerRepair]

I currently do not have a video on this. I'll keep this in mind in the event that we need to made this repair in the future.

[@xxmichellexx4291]

Will this be the same for a 2010 ford taurus?

[@HomeownerRepair]

I am not 100% sure, but see if the brake lights are working intermittently. If they are you may have to replace the brake light switch.

[@xxmichellexx4291]

@@HomeownerRepair Hi thank you for replying I'm not exactly great at cars. But I bought my ford taurus and the light prndl indicator doesnt light up along with my steering wheel lights don't light up which I assume is just a fuse. I'm just trying to figure it out because there's no info/videos about this issue on my car anywhere

[@xxmichellexx4291]

The prndl lights show up on my dashboard but it doesn't like where I switch gears in the middle compartment like your video

[@ud5928]

It will be the same steps for a Ford Expedition 2007?

[@HomeownerRepair]

It might be a similar procdure

[@slow4.o]

This video was very informative, I do have a question though. Do you think it would be possible if I were to tap into the wires for the bulb and power some led strips as footwell lights under the dash? This would allow the lights to come on when the vehicle is unlocked because I believe this bulb receives power when the doors are unlocked and when the car is on. It would be very helpful if you were able to help me out, thanks!

[@HomeownerRepair]

It might work

[@luisgregoryhinojosa]

Curious is there a way to change all the light indicators in a Ford Explorer 05 Eddie Bauer ? Would Loved if inside would be all white color! Green 🤮

[@HomeownerRepair]

Thanks for watching

[@eshankoty]

Watching this 6 months later after it was posted. All is well except actually turning the bulb and pulling it out. Very tight spot for my fingers. Is there a technique to it?

[@HomeownerRepair]

Not really ..it's just in a tight spot

[@isaakbean9101]

Yes wedge a screw driver between the bulb while turning with your fingers and the screw driver at the same time, I had to do this technique not only to take out but get back in as well

[@isaakbean9101]

Flat head is required*

[@rosac805]

Light bulb is stuck can't pull out? Any ideas?

[@HomeownerRepair]

Yo might have to gingerly grab it with something without breaking it. Maybe a pair of needle nose pliers.

[@christaprice30]

I have the same problem BUT I replaced the bulb and the fuse and it still won’t come on 🙁

[@HomeownerRepair]

You may have to test the circuit to see where you are loosing power.

[@JuanMartinez-sy1fc]

good nigth, change the bulb and it doesn't turn on with the new bulb

[@HomeownerRepair]

You may want to test the socket and the circuit to see if there is power going to the shift light indictor bulb socket. Also check the fuse on that circuit to see if it is good. Hope this helps you out.

[@walterwhite1]

Always use gloves when you’re handling an incandescent bulb

[@HomeownerRepair]

Thank you for watching our auto repair video that shows you how to replace the gear shift indicator light on a 2006-2011 Ford Explorer. Have a great day!

[@SleepingWolfGaming]

Man how tf did he make this look so easy. I cant even take the light bulb from the black electrical line 😂

[@SleepingWolfGaming]

And I broke the light bulb LMAO

[@SleepingWolfGaming]

Anyone doing this. This is a 8/10 job

[@simpgodd4646]

How did u manage to get the bulb out? I broke mine as well

[@HomeownerRepair]

Thanks for watching

[@HomeownerRepair]

It's not that hard to do. Just a little patience.

[@charlieray2349]

how you get your fingers in there so damn well?😂

[@HomeownerRepair]

It's tight...lol

[@Bshady37]

Mine comes off and on when i hit it

[@HomeownerRepair]

You may want to check the bulb to see if it is loose in the socket.

[@armystrong2006]

lasted a month no light again

[@HomeownerRepair]

That is weird! Changed mine never looked back. I would buy another bulb and try replacing it again. Maybe you just received a bad light bulb.

[@armystrong2006]

Wow my hub on driver side going out again changed three years ago the other are fine as for the light found a bad connector