How to Replace Harmonic Balancer 2003-2008 Toyota Corolla

Buy Now!
New Engine Crankshaft Vibration Damper from 1AAuto.com 1aau.to/ia/1AEH...
This video shows you how to install a harmonic balancer on your 2003-2008 Toyota Corolla. For many vehicles, the harmonic balancer not only helps balance the engine, but also drives the accessory belt. If your engine is vibrating, or belts are slipping, you might need a new harmonic balancer.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 10mm Socket 1aau.to/oa2v/1A...
• 19mm Socket 1aau.to/oabw/1A...
• 1/2 Inch Impact Gun 1aau.to/oqZ/1AX...
• Ratchet 1aau.to/obtZ/1A...
• Gloves 1aau.to/oSi/1AX...
• Safety Glasses 1aau.to/oKC/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@williamlynch6095]

You should have replaced the crank seal that's crazy

[@Vantowesome]

Hey quick question here, a 1zzfe harmonic balancer will fit in a 3zzfe engine?

[@prestontaylor517]

Any tips on lossening it? It’s not even letting go with my impact

[@TheMaxadams]

Those bolts are usually always seized are super hard to get off there's no way you can just zip it off like that easy but I seen a guy that he said you heat the bolt up red-hot and you should be able to get it off then cuz they make a special tool you can use to get it off but that usually doesn't work neither it's so tight.

[@johnmcminn9455]

My bolt came right out on my 2004 just like the video I was surprised because my tensioner pully assembly bolt was too bloated with rust to unscrew to the fire wall. So I replaced the pully and dampner And left the arm ...forever

[@chikaijita1597]

What was wrong with it