How to Replace Headlight Bulbs 2011-2018 Ram 1500

[@1AAuto]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money

[@bradbyers7505]

Thank you for the great demonstration. You saved me from deluding myself into thinking I could do this at home.

[@1AAuto]

+@bradbyers7505 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@markp5493]

Thanks for the thorough tutorial. I appreciated it. After doing this twice, due to errors I made in replacing headlamp assemblies, I found it was quite a bit easier to remove the grill. This eliminates the long extension and trying to start a bolt using a magnet

[@fordstoolreviews9964]

Automakers be like.....headlights are easy to replace. So let's put plastic with plastic retention clips in the front to make them harder.....Genius. 🤦‍♂️

[@marcelorodz]

That was a time that you just open the hood and with a #10 wrench, you were able to replace it.. Now you need a Technician course to replace a single light bulb

[@merlinnwolffe8534]

Take the front end of your truck apart. Try to remember where you put all the parts. Disconnect 17 plugs for unrelated items. Try not to destroy all of the plastic clips on the covers. Yeah, a real "user friendly" vehicle.

[@JimmyJones-w3p]

Jesus H. Christ! I miss my '75 f-100 custom. This is fucking stupid. A 30 second job turned into a 3-5 minute job. This world's going to hell engineers just don't know shit man. Glad I could vent to the void.

[@drewlyman9995]

Thanks for the video. It helped me to change a bulb in the driveway of an Airbnb 2500 miles from home with just the ratchet set I keep under the back seat. Thanks!

[@ChillinWithForrest]

Thank you for the detailed video man 🤘🏻I’m Not the handiest person when it comes to cars but this Definitely saved me a lot of money by not going to the dealership

[@phprofYT]

Thanks for the instructions. nearly 10 years on the original 2 bulbs is pretty good.

[@davidemerson1233]

Same for drivers side? Saw a video on drivers side where he removed grille.

[@MrChinook183]

My low beam light where 9005 bulbs and the round disk where not installed on my 2016 Ram 1500, there were 5 screw 5/16 screws which I had to removed the access the bulb. Everything else was spot on. I can’t figure out how to post photos of the back of my headlight assembly.

[@VencislavMarkov]

When an engineer is an idiot, he makes a major overhaul out of a simple operation, such as changing a light bulb.

[@bradvanpay7499]

And with a heated garage and all the right tools makes it easy to do, I was just about ready to go to my work and use the heated parking garage change out one bulb, but after seeing this video it made me decide to call CarX and have it done for a hundred bucks. Thanks anyway

[@joerobilotta2199]

Is the driver side the same processes

[@Robotron2084Guide]

The young unsuspecting kid at Autozone…. Would you like me to install those new headlamps for you. Why yes, yes I would. ….3 hours later.

[@jelendrez3729]

great video. does the tire need to be removed to have access under the fender?

[@tarekkalimat]

Clear and simply. You are a great instructor sir. Thank you

[@patrickvaresi618]

I Moisture in my driver side headlight how do I take care of it

[@splash_zoe9399]

Why my Ram1500 has different bulbs sizes and different wiring?

[@psracefan]

Where did the bottom bolt go? We never saw it reinstalled, unless I missed it.

[@aarondavison3640]

If you have a Ram Rebel, remove your grill. It makes the whole process easier and faster and you won’t break your grill or your headlight assembly 😑

[@ghettotoyota]

Thanks for the comprehensive vid

[@Chadnmurfreesboro]

What he doesn't mention is that the wheel and tire are in the way of being able to see that retention clip. Unless you have a generous lift kit or you remove the wheel and tire, you won't be able to see that clip, no matter which side you turn the wheel to it's stop.... That trap door is 2.5 inches from the tire tread. #$-@*"€π√¢∆£!!!

[@billhummel949]

Thanks! Good video! Wasn’t too difficult

[@jameskinchen2148]

Yeah, OK. I’ll get right on it. As soon as I finish cracking the bank safe.

[@darkzak47]

Thank you! Sick and tired of paying a mechanic 200 dollars to do a job that probably takes him 30 minutes.

[@TheDrywallogist]

Isn't that the easiest side? I heard it takes 3 hrs to do both sides.

[@Mike-q7l]

Yeah because everyone has a magnet land around to retrieve the bolts this is fucking ridiculous

[@waltpettis1480]

Turn the wheel all the way left or right.

[@davidemerson1233]

I had to remove 5 8mm screws to get to bulb

[@jamesmilsap6496]

Just be glad you don't own a beamer check on that price

[@jacobyoder4166]

You got too close up with the camera, I can't see where on the vehicle you are so I went to a different video. Just wanted to let you know. Otherwise great video. Thank you.

[@whitehorse7516]

Oh thank you

[@jointglobalceo]

Why tf Is this this hard

[@ryeinaldobettahavmamony7656]

What is this world coming to

[@blairgreensides1252]

Insanity

[@marmay6874]

aa a owner of 2019 classic I must say,what a stupid design,simple task of changing front bulb,turn to be a complcated,too long time consuming proces lol

[@rustylamphear8699]

Why don't any of you so called experts ever do the drivers side ya know the side that is actually difficult