How To Replace Headlights 2007-2014 GMC Sierra 3500HD

Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 2007-2014 GMC Sierra 3500HD.
• Check here for more videos on the 2007 to 2014 GMC Sierra 3500. • GMC Sierra 3500 3rd Ge...
This process should be similar on the following vehicles:
2007 GMC Sierra 3500 HD
2008 GMC Sierra 3500 HD
2009 GMC Sierra 3500 HD
2010 GMC Sierra 3500 HD
2011 GMC Sierra 3500 HD
2012 GMC Sierra 3500 HD
2013 GMC Sierra 3500 HD
2014 GMC Sierra 3500 HD
Tools you will need:
• 10mm Socket 1aau.to/oa/1AXA...
• 7mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Ratchet 1aau.to/oa/1AXA...
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
GMC Sierra 3500 3rd Generation 2007-14: • GMC Sierra 3500 3rd Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@5025rock]

Well done. Good video work, including lighting, close ups and avoiding obstructions. Concise, explicit, plain narrative corresponds exactly to what’s in view. There are several other tutorials on this subject, however, I found this one to the best on all points for the viewer to actually be able to follow and DIY.

[@tysdrift2404]

Nice I knew there was a faster way thanks a lot👍

[@jeffpuckett816]

Thanks for the how to video, great at that.

[@mason7119]

This is the best and most common sense way of getting at these bulbs. I've seen some other videos and they are a pain to follow. Thank you!

[@TRQ]

+@mason7119 Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@mwniels]

Just what we needed, thanks!

[@manuelayala8851]

Grate buddy, thanks for.sharing the video. That help a lot.

[@TRQ]

+Manuel Ayala Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@Kevin-fq4hf]

Interesting that the bulbs all need to be changed on a new light? would never figure that

[@michaellacy6285]

Key word in this video to remember - “ slide “

[@JimSoutham]

Thank You, Great Job!

[@aprillewis4996]

After changing to new assembly, why would my lights not switch from brights to dim? It's not 11 or 16 fuse. Relay?

[@briancayko]

does this adjust low & high beams both?

[@TRQ]

+@briancayko These will have separate adjusters.

[@ivan-7774]

💯👍

[@russpeaknuckel9525]

$300 to change a light bulb 😅