How to Replace Hyundai i30 Interior Door Handle Problem DIY 2007-2012

Рет қаралды 19,028

Күн бұрын

Пікірлер

@neils8443 Жыл бұрын

Really helpful video. Seeing someone demonstrating how to do the job was great. Prob took me about 15 only coz i struggled getting those little clips that hold the door card on out of the door body.

@thepartsfactory4239 Жыл бұрын

Glad it helped

@terryoleary8219 11 күн бұрын

Very helpful video. Just replaced the front drivers side door handle on my 2011 Hyundai Elantra Touring. Elanta Touring is the North American name for the I-30. I didn't unplug the two electrical connectors but I can understand doing so would make filming the the video easier. It was a bit below freezing outside which made it a bit challenging.

@thepartsfactory4239 11 күн бұрын

Glad it helped

@JohnFKelly-jx2tk 8 ай бұрын

Wow! This a handy instruction video. I'm about to order the door handle so I'll let you soon know how the replacement procedure went. Thx, John

@KazTunsted Жыл бұрын

Very helpful video, with step by step instructions. Autolock didn't want to work first up but I just redid it and got it going fine. See even girls can do it.

@ianmorgan5567 Жыл бұрын

Thanks for the video. Worth noting if you are doing the rear doors that there is an additional screw at the back (inside door jamb). Also keep track of which screw goes where as the ones at the bottom and back of handle assembly are different from the rest. Have some grease on hand to lube up the lock and handle cables and nodules as they may otherwise be a bit stiff, especially the lock.

@kanepeeters9980 Жыл бұрын

Super helpful and saved myself about $300 doing it myself

@thepartsfactory4239 Жыл бұрын

Thats what we are all about :P

@salomejoy2409 4 ай бұрын

Thanks mate. The door card wasn't as easy as you made it look but we got there on under 10!

@thepartsfactory4239 4 ай бұрын

Glad it helped

@HusnaMukunzi Жыл бұрын

Are the two wires different the balck and grey or could you just buy one and exchange it with the other

@TrungLe-lw4zm Жыл бұрын

Thanks for sharing this video. I’ve just replaced mine

@bodjac89 4 ай бұрын

Hi can you confirm if this would be the same/similar process to changing the handles on a Hyundai Getz (2006)?

@thepartsfactory4239 4 ай бұрын

Way easier on a getz

@forsythbruce8866 10 ай бұрын

So beautifully explained; brilliant, thank you!,

@thepartsfactory4239 10 ай бұрын

You're very welcome!

@geffenaumann Жыл бұрын

Super clear and helpful. Thanks!

@thepartsfactory4239 Жыл бұрын

Glad it was helpful!

@alkinloch Жыл бұрын

Great video, really helpful and clear, thanks 👍👍

@thepartsfactory4239 Жыл бұрын

Glad it was helpful!

@swc1231 9 ай бұрын

Good video. But when will the part be back in stock???

@thepartsfactory4239 8 ай бұрын

A few weeks back in stock

@swc1231 8 ай бұрын

Hi. Any progress on when part will be back in stock?

@thepartsfactory4239 8 ай бұрын

About 30 days

@monael-chami798 13 күн бұрын

Thankyou so much God bless you ❤

@thepartsfactory4239 11 күн бұрын

You are so welcome

@rosbl3185 Жыл бұрын

Hi there, I’ve done the replacement with a new part but the automatic lock and unlock doesn’t want to engage - it effectively just stays in the locked position. Any tips or tricks here?

@thepartsfactory4239 Жыл бұрын

Sounds like that cable isn't on properly. Or it's reversed. The cables might be the wrong way around

@rosbl3185 Жыл бұрын

@@thepartsfactory4239 the cables appear to be on the right way as it works with the old unit when I swap it back over. Is there a rubber catch/ block at the top of the lock mechanism that may have slipped off which helps with how far in the lock unit can go?

@Ksandros.M Жыл бұрын

@@rosbl3185 I have the same issue, did you manage to fix it?

@AH-qv3wf Жыл бұрын

I'm having this problem too - were you able to fix it in the end?

@donadams-jz6dc Жыл бұрын

@@AH-qv3wf Just replaced the handle and had the same problem with the automatic lock. Found the metal barrel on the cable end was very tight when inserted into the plastic recess in the new handle. Placed a tiny smidgen of grease on the barrel and re-insert fully into the plastic retainer making sure the cable can swings down into the plastic retainer otherwise the cable will kink when it is engaged in the locked position. NB it helps to have the cable in the fully extended unlocked position to start with.