How to Replace Intake Gaskets 2000-06 GMC Yukon

Buy Now!
New Intake Manifold Gasket Set from 1AAuto.com 1aau.to/ic/1AEGS00322
Gaskets help seal joints between components in places where you don’t want air, or fluids leaking out of that seal. Rubber or silicone gaskets may dry out or harden over time, reducing their effectiveness. This video shows you how to install an intake gasket set in your 2000-06 GMC Yukon.
• Buy TRQ at 1AAuto.com: www.1aauto.com/yt/i/1AEGS00322
• Check here for more videos on the 2000-06 GMC Yukon: • GMC Yukon 2000-06 2nd Gen
This process should be similar on the following vehicles:
2000 GMC Yukon XL 1500
2001 GMC Yukon XL 1500
2002 GMC Yukon XL 1500
2003 GMC Yukon XL 1500
2004 GMC Yukon XL 1500
2005 GMC Yukon XL 1500
2006 GMC Yukon XL 1500
Tools you will need:
• Pocket Screwdriver
• 8mm Wrench 1aau.to/ofW/1AXAA00011
• 10mm Socket 1aau.to/oaF8/1AXAA00017
• 8mm Socket 1aau.to/oaF8/1AXAA00017
• Air Compressor
• Trim Tool Set 1aau.to/oRd/1AXXX00006
• Swivel
• Torque Wrench 1aau.to/oagi/1AXAA00044
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags 1aau.to/ovm/1AXSS00035
• Gloves 1aau.to/osL/1AXSS00048
• Safety Glasses 1aau.to/onM/1AXAA00343
• Pick 1aau.to/oBu/1AXAA00037
• Razor Blade / Gasket Scraper 1aau.to/ogw/1AXAA00280
Subscribe: / @trq
Check out our playlist:
GMC Yukon 2000-06 2nd Gen: • GMC Yukon 2000-06 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@shawnmerica1807]

Awesome video, nice clean and very clear with detail!

[@robertpineda577]

The torque for the bolts on the intake manifold is incorrect. 44lbs is too much bolts will snap. Gotta remove 1 now

[@71druss]

Very helpful, thanks for posting

[@bubbasreviews5295]

Awesome job thanks!

[@rigopena2794]

Excelentísimo!!!!

[@JS-jv6rg]

You forgot to reinstall the relay. There are some parts that did not need to be taken off.

[@chrisbarrier6839]

Replacing this gasket will it fix my rough idle on cold starts?

[@dougjerone1537]

Yes

[@SickspeedJ35]

Will a bad gasket cause p0300 code, changed spark plugs and coils are good and still getting misfires and p0300

[@JS-jv6rg]

How common would it be for oil to leak oit from manifold gaskets?

[@thejarv7432]

No thread sealant?

[@elijahroque9916]

How do I repressure the gas is it needed ?

[@nathang1332]

What causes p0300

[@roltyd22]

Is that a fiex fuel engine? Wasnt there a tsb on not to use the red gasket but use the green colored ones because its a different rubber material..

[@budthechud3408]

That's exactly what I was about to ask

[@budthechud3408]

Even though I own a 2004 GMC Yukon and love it's old rusty ass,that factory plastic intake just looks like a hunk of complete shit to me! if anyone has a good line on an affordable aftermarket intake for the L59 vin code z engine please throw a 🐶 a 🦴.