How to Replace Left Bank Oil Cooler Line 2010-2015 Lexus RX350

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/120/s/engine-oil-coo...
This video shows you how to install oil cooler lines on your 2010-2015 Lexus RX350. Engine oil cooler lines may become rusty, cracked, or leak after a while, which means you need to replace them.
This process should be similar on the following vehicles:
2010 Lexus RX350
2011 Lexus RX350
2012 Lexus RX350
2013 Lexus RX350
2014 Lexus RX350
2015 Lexus RX350
Tools you will need:
• Pry Bar 1aau.to/oXc/1AXAA00020
• 14mm Wrench 1aau.to/oZo/1AXAA00010
• 10mm Socket 1aau.to/obiU/1AXAA00017
• 14mm Socket 1aau.to/obDT/1AXAA00015
• 17mm Socket 1aau.to/obDT/1AXAA00015
• 21mm Socket 1aau.to/oamS/1AXAA00043
• Trim Tool Set 1aau.to/oagQ/1AXXX00006
• Pliers
• 1/4 Inch Ratchet 1aau.to/obiU/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obDT/1AXAA00015
• Torque Wrench 1aau.to/oaLT/1AXAA00044
• Gloves 1aau.to/oamu/1AXSS00048
• Safety Glasses 1aau.to/oaen/1AXAA00343
• Drain Pan 1aau.to/oBV/1AXAA00320
• Floor Jack 1aau.to/oabd/1AXAA00068
• Jack Stands 1aau.to/oYf/1AXAA00065
• Pick 1aau.to/oSk/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Lexus RX350 2nd Generation 2010-2015: • Lexus RX350 2nd Genera...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@tpp4007]

Hello, thank you for the wonderful detail tutorial. Can you please tell us what is the purpose of the part and why you’re replacing it before you replace it? I think it would be beneficial for your viewers to know the function of the part before replacing it.

[@Derpherppington]

Not sure why u remove all that stuff in front

[@johnconway8999]

I would of put a new alternator in while you had it all apart!!!!