How to Replace Lower Ball Joint 2010-2013 Ford Transit Connect

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ic/1ASB...
New Ball Joint Set from 1AAuto.com 1aau.to/ia/1ASB...
This video shows you how to install a lower ball joint on your 2010-2013 Ford Transit Connect. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This repair was done on a 2013 Ford Transit Connect XL 2.0L Mini Cargo Van 4-Door FWD Automatic and the process should be similar on the following vehicles:
2010 Ford Transit Connect
2011 Ford Transit Connect
2012 Ford Transit Connect
2013 Ford Transit Connect
Tools you will need:
• Pry Bar 1aau.to/oPs/1AX...
• 19mm Wrench 1aau.to/oRW/1AX...
• 15mm Socket 1aau.to/obiA/1A...
• 24mm Socket
• 32mm Socket 1aau.to/ocd/1AA...
• 8mm Socket 1aau.to/oaZh/1A...
• Ball Joint Press
• Brake Caliper Hanger 1aau.to/ohI/1AX...
• Snap Ring Pliers
• Straight Cutters
• Air Chisel
• Ratchet 1aau.to/obsN/1A...
• Socket Driver
• Socket Extensions 1aau.to/obiA/1A...
• Torque Wrench 1aau.to/oawA/1A...
• Copper Anti-Seize
• Gloves 1aau.to/oQv/1AX...
• Safety Glasses
• Center Punch 1aau.to/oki/1AX...
• Floor Jack 1aau.to/oW8/1AX...
• Hammer
• Jack Stands 1aau.to/oPM/1AX...
• Vise
• Wheel Chocks
• Wire Brush 1aau.to/orG/1AX...
Subscribe: / @trq
Check out our playlist:
Ford Transit Connect 1st Generation 2010-2013: • Ford Transit Connect 1...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@mshaneweaver1]

You cut out the most important part. How to get the last quarter inch of the ball joint seated…

[@bakersfieldbatteries9476]

Very well explained Straight to the point Thanks

[@1924ab]

Very well presented.

[@nexpro6985]

Driveshaft is not an axle.

[@gade29]

When axle nut is removed the axle is old rusty and after nut removed video shows shiny new axle b4 he supposedly gets that far. LOL

[@torstenpieplow2676]

Bin in der Englischen Sprache nicht so gut ( ehrlich gesagt schlecht ) aber ich finde das Video erklärt alles super. Tolles Video auch die Erklärung mit dem Ausbau vom Kugelgelenk am Radträger super . Vielen Dank für das informative Video 👍

[@stalkergreg]

07.55 - 08.00 ??? Miracle ?

[@TRQ]

+@stalkergreg Thanks for watching our video! 1aau.to/m/Shop-TRQ