How To Replace Main Brush Motor In Ozmo 920,950, T8, T9, N8 Pro, T8AIVI & Many More.
Пікірлер: 154
@kevinjones3665Күн бұрын
Thank you for making this video of this "extremely easy" repair. Couldn't have done it without you!
@reV01Do06 ай бұрын
This video was so helpful! I would never have been able to repair my T8+ without it!
@WHITTIER832 Жыл бұрын
The brush on my N8 Pro+ quit spinning, watched this video, bought the part online for $30 or so bucks at amazon, followed the video and the robot fired right up after assembly. On my Brush Motor, the pinion gear on the motor had stripped due to hair getting in and displacing the lubricant. Thanks Guys, saved me some money in these expensive times!
@ecovacstechnicalsupport5278 Жыл бұрын
Welcome
@sidneyppaiva Жыл бұрын
Dear Ecovacs support. I had a problem with our Deebot N8 Pro+ the main brunch was very noisy. I have decided to buy a new robot an I did it. But After watching your videos I decided to try to fix our old one. I could not find the main motor in USA but I bought one from china. After 20 days the new motor arrived and I assembled the robot today. It was completely disassembled and now IS WORKING PERFECT!! I am writing to thank you for for great video teaching us how to disassemble and assemble the Deebot. Thank you so much! I hope you can get some compensation from You Tube. It was a awesome experience for me. Thanks again for your generosity.
@ecovacstechnicalsupport5278 Жыл бұрын
I'm really glad to hear that you Fix deebot & it's working perfectly fine... that's my real reward 😊😊
@johnsonjoseph98812 ай бұрын
Thank you! I was able to do a repair myself, it was not easy, The gear attached to the motor was half gone, but I managed to make it working by raising the other gear wheel with an additional washer! It works fine now, not sure for how long though 🙂
@randomthoughts-20243 ай бұрын
This video was of so much help in replacing the main brush motor. Without this I would never have even attempted it. Thank you very much. Extremely detailed and also you mentioned all the little things in between which were of great help.
@DanielK-p7h12 күн бұрын
awesome video, my brush stopped spinning. after cleaning the motor it worked perfectly fine although i got two srews left ... but the dude in the video is right its a pain in the ass to dissemble and reassemble.
@user-yg9cu2bo1t Жыл бұрын
Thank you very much for this video. I just completed a replacement following your instructions and I do not think that I could have done it without your guidance. Well done boys! 🎉
@ecovacstechnicalsupport5278 Жыл бұрын
Thanks 🙏🙏🙏
@rickykelly2595 Жыл бұрын
My main brush was feeling bound tightly at random intervals of rotation. His very detailed instructions allowed me to get the motor out and remove my animals hair/grease sludge from the gear box, re-lube and put our Deebot N8 Pro Plus back in action. Very minor differences in some wires and screw locations, but I would have never pulled the motherboard to get to the motor without his instructions. Thank you for this!!
@ecovacstechnicalsupport5278 Жыл бұрын
Waoo superb.... really happy to hear that my videos help you to Solve The Issue 😊😊😊
@rickykelly2595 Жыл бұрын
@ecovacstechnicalsupport5278 thank you. It was very concise and detailed. Deebot got right back to work after reassembly.
@wpacer94 ай бұрын
Thankyou, have never completed anything like this before and your teaching style is so easy and effective
@kellyspencer3598 Жыл бұрын
Thank you for showing how to replace motor. My Deebot is now up and running like it should and you saved us some major monies.
@ecovacstechnicalsupport5278 Жыл бұрын
Please to hear that you Fixed Ur robot....
@AnontheGOAT Жыл бұрын
Update: got the new motor installed and got this baby back on the road! Thank you for this very informative video!
@ecovacstechnicalsupport5278 Жыл бұрын
Welcome 😇😇
@user-dh4je9rh8y6 ай бұрын
Thankyou!! We ordered the motor off eBay and fixed it our selves really appreciate your help!!
@ecovacstechnicalsupport52786 ай бұрын
Waoooo really happy to hear that
@chloeaus52723 ай бұрын
Took me 3 hours but my t9 is clean and ready for me to order a new motor now that I know I can replace the part. Thanks :)
@nicolasfichaux9454 Жыл бұрын
i am replacing the brush motor; i disassembled the deebot, and i am so grateful for this video to help me re-assemble it back 🙂
@5K4LP-TP11 ай бұрын
I started working in a company doing repairs of all kind of stuff at the beginning. And a customer gave us this product cause the main brush us not turning. Now I might be able to do a diagnostic and repair it if the customer want it. Thanks a lot !
@ecovacstechnicalsupport527811 ай бұрын
If it's not ozmo 950 then just main bruh motor need to replace...if ozmo 950 them might be motherboard n motor together need to replace
@niteshgulati6 ай бұрын
Very helpful video. Thank you for making it. Fixed my 950 at home, saved me a ton of headache.
@mrsynical8725 Жыл бұрын
Thank you was finnecky but your video helped me replace the main brush motor
@ecovacstechnicalsupport5278 Жыл бұрын
Welcome 🤗
@TmanTV38 ай бұрын
Man what an absolute pain. For a piece that inevitably get clogged up you'd think they'd make it as easy to get to and clean. My n8+ kept saying the brush was tangled but nothing was in the brush. Came across a forum saying the motor itself was probably clogged. Followed this vid and opened up the casing and sure enough it was an absolute mess. Make sure you buy some super lub synthetic grease if you plan on cleaning it out as you need to re-lube the gears after washing them off thoroughly. Thank you so much for making these videos because I never would've been able to figure this out on my own.
@ecovacstechnicalsupport52788 ай бұрын
Welcome 😊
@christianstindt458311 ай бұрын
Thank you so much! I replaced the left side brush Motor of my deebot t9. Without your Video, I would never have been able to do it!!
@ecovacstechnicalsupport527811 ай бұрын
Welcome 🤗
@00dalf8 ай бұрын
This video is everything that is great about KZbin! Thanks so much for making it!
@ecovacstechnicalsupport52788 ай бұрын
Welcome 🤗
@avtarsinghhoonjan6660Ай бұрын
Brilliantly explained 👌 👏
@tanmaygangani4763 Жыл бұрын
Great video and quite helpful. This will help a lot of people. Would just like to correct one thing that at 19:13 you mentioned carpet sensor. It is actually the mop plate detection sensor, under water pump with white glue! Your videos are quite educational and interesting! Thanks
@ecovacstechnicalsupport5278 Жыл бұрын
Thanks for correction... some time in flow I just speak but later when customers inform then only I realise that what's the mistake... that's mop plate detection sensor..you r rite.. thanks again ❤
@kyle79711 ай бұрын
Thank you very much. Not only for the main taking it apart bit, but also the putting back together!
@ecovacstechnicalsupport527811 ай бұрын
Most welcome thanks
@benjaminbigscoppel79322 ай бұрын
Thank you for the video guide! You covered it well.
@rowdywabbid Жыл бұрын
This video was very helpful for my T8. I was able to go in and check on the motor, unfortunately the motor was so clogged with dust that it must had burnt out. I managed to order a new motor so hopefully that resolves the issue.
@ecovacstechnicalsupport527810 ай бұрын
Thanks 🙏
@user-jt3zs5sh1v9 ай бұрын
شكرا شرح مفيد لدي مكنسة deebot T8 AIVI كان الصوت صاخبًا واكتشفت بإن الفرشاة الرئيسية لا تعمل وطلبت قطعة من الموقع علي اكسبرس واستمعت إلى شرحك وعملت كامل الخطوات وهي تعمل كالجديدة ، شكرا على مساعدتك 👍
@ecovacstechnicalsupport52789 ай бұрын
شکراً جزیلا ۔۔
@AnontheGOAT Жыл бұрын
Thank you for this video!! The gears inside my motor were completely shredded. All uneven teeth and some of the gears had no teeth left. Looks I’m buying a new motor!
@ecovacstechnicalsupport5278 Жыл бұрын
Just replace main brush motor.. Will be ok
@AnontheGOAT Жыл бұрын
@@ecovacstechnicalsupport5278 yup, that’s what I did. You actually replied to my other comment where I thanked you for this video. Vacuum has been running like brand new for over a month now every night. Thanks again.
@arminbashizade92812 ай бұрын
Thanks for this video, it saved me so much money! When I was disassembling a small rubber piece jumped out and I can't figure out where it needs to go 😅 is there anyway I can send you a picture of it? you can probably tell what it is
@smactardian Жыл бұрын
What a great video. Thank you for sharing your expertise.
@ecovacstechnicalsupport5278 Жыл бұрын
Welcome
@zadafro175 ай бұрын
Thank you so much for your help. I sent you a WhatsApp with my issue and you replied pretty much instantly with clear solutions. Thank you!!
@chetansingh95758 ай бұрын
Thank you! This helped me fix the issue.
@ecovacstechnicalsupport52788 ай бұрын
Welcome
@jp.81542 ай бұрын
How long did it take you to replace?
@matthodson5886 ай бұрын
Thanks heaps, used this video to repair my t9
@YUDVAD3 ай бұрын
Thank you! This video helps me a lot !!!
@samwhite4322 ай бұрын
Very helpful video, thanks! I've successfully replaced the main brush motor on my Deebot T9+. However upon reassebly, I found a small rubber wedge that had fallen out of the vaccuum at some point. It measures 14mm long, with a triangle profile of 7mm wide and 8mm high. I don't recall seeing it during disassembly/reassembly and have no good idea of where it has come from. It's a long shot, but do you have any suggestions about where this piece should go? Perhaps somewhere around the main brush enclosure?
@JohnRighetti-le7dr7 ай бұрын
Hey guys, great video thanks so much. Gave me the confidence to give this a try. Only problem is I’ve reassembled back to test and it’s still making a whirring/buzzing sound from around the area where the brush motor is and not turning. Any ideas? Thanks so much 🙏
@ecovacstechnicalsupport52787 ай бұрын
Plz check my videos about side brush motor noise issue.. might be side brush motor issue
@brittneywasson9740Ай бұрын
I can’t thank you enough ❤
@jamestownsend31544 ай бұрын
Thank you for the video. It was very helpful for replacing a T9 AIVI motor - before replacing the motor the vac would stop after a few minutes with error message saying the main brushbar was tangled even though it was not. The issue I am now having though after motor replacement, when the vac hits into a wall, it will sit still for a minute, and then continue on, hit the wall again and sit for another minute. On an open area it seems to clean ok but as soon as it turns/hits something the vac just stops moving even though the brushes are all spinning. Any suggestions?
@scottbucton724914 күн бұрын
How do I get a hold of the spares for the main brush gear box. The gears are stripped in mine
@serdaraltay99122 ай бұрын
Thank you very much, the video helped me to replace the motor, but i have an problem now: when i start the deebot it is cleaning backward and stops with the problem „bumper blocked“. What did i wrong?
@AnannyaK798 ай бұрын
Hi, i have been following your videos and they are amazing, clear n crisp.. My question is which lube should I use to re-lube the gears.. Request please specify the details
@ryanpacker63707 ай бұрын
Super helpful video! I still have an issue though. I've gotten everything back together up to the test phase and now I have a "Please clean drop sensor" error. It seems that the wires and connections are all in good condition and the sensors themselves also look to be in good, clean, and clear condition. Is it possible I missed something, or am I looking at a mainboard issue? Are there any possible suggestions?
@user-sd2es7ky5g7 ай бұрын
My main brush was having issues so I ended up watching this video. I must say it it a very detailed video. After I install pieces back and after putting battery, I ran the test you recommended before putting everything back. It appears that the right wheel is not rolling. I watched your other videos on wheel malfunctioning but for my vacuum the wheels were working perfectly fine before I opened the vacuum to replace main brush motor. How can I fix this issue ? Thanks again
@user-sd2es7ky5g7 ай бұрын
I opened the wheel and checked for the motor getting burned but didn't see any signs of that. Re connected all the wires for the right wheel. What am I missing here ? Thanks once again.
@user-sd2es7ky5g7 ай бұрын
Please help @ecovacstechnicalsupport5278
@MrPierBacco8 ай бұрын
Hi thank you for the very useful content of this channel. I own a Deebot N3 Max, I would like to know if the main brush is the same of other models since I am having difficulties finding a spare part. Thank you!
@ecovacstechnicalsupport52788 ай бұрын
In Malaysia we are not using this model so I not yet seen this model...no worries sir you plz just send some pics of ur deebot & main Brush pics I'll let you know which model you can order...00601137973018
@michaelp92382 ай бұрын
Great video, thank you! Can you provide me the name, link, or model to your electric screwdriver?
@BombayMasti2 ай бұрын
Dear Sir, I have Deebot 950, the right side bruch is making noise when the robot is at the corner, otherwise it works best and there is no noise. I opened the robot, thanks to this video. When the gears are checked, they don't seem to have any issue. When I cleaned and regreased the gears, I can see the gears are slipping. I need a help to get the gears, is it possible?
@DaveTan65Ай бұрын
How about the H77R?
@iwish2seeit19 күн бұрын
Sir I have ECOVACS Deebot T8 purchased in year 2020. Issue with my robot Vaccum cleaner is that its tyre upper layer is deteriorated. In any case I can replace it only…
@devinw90887 күн бұрын
How many cents did you guys save by going with plastic drive gears? Because it wasn’t worth it. Ours is shot after only 3 years. Sounds like a dentist drill as the gearbox is stripped out.
@smylblack5 ай бұрын
Hi, i can't take of front top cover like you did on ozmo 950. It feels like if i pull it harder it will break. Feels like screws holding it.
@someoneelse66414 ай бұрын
where do the 2 coil springs go? they fell out as i was pulling it apart and i cant remember where from.
@pasqualeferro89287 ай бұрын
hi, greetings from Italy. I have the main brush problem, i followed your guide or disassembled everything, i tested the disassembled motor and it works. I reassembled everything but the brush doesn't turn! Do you think it's a problem with the motor that isn't fitted or the motherboard? Thank you!
@southparkgeek124 ай бұрын
I tried to reconnect the "carpet sensor" in my 950, but i can't find where to plug it into. I dont know if i did anything wrong with taking it apart but can find it
@VinodBandodkar-k8q15 күн бұрын
How to know if main brush motor is not working since main brush is not spinning even after cleaning d same
@ingsalinasipn6 ай бұрын
Hi from México, I was wondering if it is similar to a deebot 930? Thanks in advance. u r awesome
@ecovacstechnicalsupport52786 ай бұрын
Ozmo 930 parts are all different from this model sir
@maratkovalyov49502 ай бұрын
Can anyone advise online stores where i can buy ecovac deebot t10 plus main vacuum motor
@pedromoia97618 ай бұрын
Thank you very much for your videos. I have an Deebot X1 Omnia. Can you please tell me the Part Number of the Main Brush Motor assembly, and where can I buy it from? I'm not finding it online, but maybe it's the same motor as previous models.
@ecovacstechnicalsupport52788 ай бұрын
Yes you can order Ozmo 920, 950, T8, T8AIVI, T9 ...any from these model...all using the same motor assembly sir
@zqzqzqz2 ай бұрын
@ecovacstechnicalsupport5278 Thank you so much for making and sharing these incredibly helpful videos! You've helped me repair my robot vac MANY times! I'm hoping you can help answer a question... Under the LDS assembly and housing are 4 small push buttons (outer buttons facing up, inner buttons facing out) wired in series to a 3 pin connector (only the outer two pins are used). Do you know what the function of these buttons are or know what the pinout of the three pin connector is? Asking because the wires broke off very close to the connector during disassembly, and I'm not sure which wire goes to which pin on the connector. Thanks so much for everything!
@ecovacstechnicalsupport52782 ай бұрын
When deebot go under sofa or bed etc...if place not enough so top cover Will Press down or Press back From from....these buttons function that time...U can try..press top cover you will feel clicking soundsor press from front top cover you will feel same click....when we Press this so deebot will reverse back from that places so it won't get stuck easily this type places
@zqzqzqz2 ай бұрын
@@ecovacstechnicalsupport5278 Thank you SO MUCH for quick and helpful reply! I really appreciate it!
@pedromoia97615 ай бұрын
Hello Sir. After replacing the main brush motor on my Deebot x1 omni, I cannot see anymore the video from the front of my robot through the app. Black screen. I think it is related with the flat connector you mention in this video not from the top camera but the front one. See 5:09. How can I know if despite I don't have the video in the app, the sensor is working correctly for the robot to correctly avoid obstacles, etc? Is there any test I can perform?
@katherineng93798 ай бұрын
I'm having trouble removing the cover to get to the motherboard. I disconnected all the cords, does it require a bit of force? It looks like you were able to remove it easily
@ecovacstechnicalsupport52788 ай бұрын
Yesterday I just uploaded a new video in that I mentioned this part once again... Will be helpful for you if you want to remove Top cover of ur deebot
@BDavid7606 ай бұрын
Thanks for the video. Do you know where i can find a replacement pcb for the tiny pcb that takes the ribbon cable to the top right of the motherboard? I broke the tiny plastic locking piece then bent the pins where the ribbon connects in to.
@ecovacstechnicalsupport52786 ай бұрын
Need to check online sellers
@ecovacstechnicalsupport52786 ай бұрын
In Malaysia I can provide
@xpmakerlab10 ай бұрын
Thanks for the video. can you please share a link to buy this main brush motor with gearbox (what you replace here). I really appreciate any help you can provide.
@ecovacstechnicalsupport527810 ай бұрын
Actually parts you need to check online because I bought from china direct..but Amazon Ali Xpress in different countries different sellers selling online...U just check the model no...this motor assembly can use in various models...Ozmo 920, 950, T8, T8aivi, T9,T10,even in Omni also is same assembly
@user-qe7wl7fm4l2 ай бұрын
สุดยอดเลย
@lancelenhart22763 ай бұрын
Does the T20 have the same set up? It seems like my T20 main brush is not spinning
@lancelenhart22763 ай бұрын
Also what motor does it take
@jeanbennett2531 Жыл бұрын
Thank you for this video! I fixed the main brush and it's working perfectly. I buttoned it up, put it on the floor and it runs backwards. Once it runs into something I get a drop sensor error. Can you tell me what wires might be crossed?
@ecovacstechnicalsupport527811 ай бұрын
Tap the bumper bit Hard bumper sensor I think stuck in assembly...whith taping it will come out...or u can remove bumper n clean inside all dust n remove that sensor manually with fingers.... there's video also available at this topic
@eudaxia7 ай бұрын
Hello, I have a T8 AIVI-- changed the main brush motor and it still doesn't spin. I have installed a new main brush as noted in your other video and the roller guides are not burned out. Any suggestions?
@ecovacstechnicalsupport52787 ай бұрын
If new motor not turning then motherboard got short circuit with main Brush motor..need to replace motherboard together with motor
@countrycamper11 ай бұрын
Great video - thank you. After reassembly, my ecovacs seems to be running backwards! I checked the mainboard plugs against the photos I took during disassembly. Can't see anything wrong. Have you see this behaviour before?
@ecovacstechnicalsupport527811 ай бұрын
Many times... mostly is assembled slightly wrong specifically from front that's why bumper stucks with top cover... sometimes technicians forget to fix front anti drop clip which touch the bumper
@mrgold3591 Жыл бұрын
I live in the southwest USA and can't find a Ecovacs Deebot N8 repair shop near New Mexico? This is my second Ecovacs that only lasted under 2 years before needing repairs (950 first Ecovacs).
@ehsankeshtgar673410 ай бұрын
Hi and thanks for the video. does deebot have any wifi module ? my debot is no longer shows its current location on the map. it also fails to find its location. I thought it might be because of its wifi module or something?!
@ecovacstechnicalsupport52788 ай бұрын
This type issue normally happens when LDS or D-Tof assembly giving error...need to do some service of LDS/D-Tof assembly.. hopefully will solve the issue
@ehsankeshtgar67348 ай бұрын
@@ecovacstechnicalsupport5278Thanks, I'm good at electronics, is it something that I can fix myself ?
@kaiyetl11 ай бұрын
Hi, is OMNI X1 turbo also shares the same motor?
@ecovacstechnicalsupport527811 ай бұрын
Yes main brush motor assembly is same...not the whole part just motor with its gears are same
@Bitt3rh0lz10 ай бұрын
Many thanks for this video! I have a Ozmo 950 and the main brush motor has just recently burned out because it sucked in a cat toy and got stuck. I am now running the Bot with the vacuum slot instead of the brush slot (works reliable and gets all the stray cat hairs likle a champ agaon). My question: Is there any problems I can expect from the burned out motor or should I be able to run it this way just fine for the forseeable future?
@ecovacstechnicalsupport527810 ай бұрын
In Ozmo 950 model my experience is that 70% cases motherboard & main Brush motor together need to replace...but U can try to replace main Brush motor only first if it starts working then ur luck...if not then see if you want to replace motherboard..more can continue using like this also no issue
@Bitt3rh0lz10 ай бұрын
@@ecovacstechnicalsupport5278 Thanks for the advice! So far it runs great with the vacuum insert instead of the brush.
@valeriupacuraru94409 ай бұрын
Hello. Does it also work for Deebot R98?
@ecovacstechnicalsupport52788 ай бұрын
Dr98 is easy... because wheel no need to take out in this model..
@GRAHAMAUS4 ай бұрын
Excellent video, thanks. Just working through doing this on my N8 Pro. Have to say, it's a fucking stupid design that there's no access panel for that motor.
@Katanalein Жыл бұрын
If the motor is still working, what else could it be that is preventing it from spinning? Does the mainboard need to be replaced?
@ecovacstechnicalsupport5278 Жыл бұрын
You mean side brushes main brush turning vacuum fan also spinning but deebot not moving forward...after few seconds deebot itself gives error what's the issue... Some time just says plz help me out... means D-Tof assembly issue....
@Katanalein Жыл бұрын
@@ecovacstechnicalsupport5278 I mean the main roller brush. My T8 Aivi is cleaning, side brushes are rotating, there is no error message in the App but the main roller brush is not rotating. So I used your video guide to open the robot and I replaced the motor like shown but it didn't solve the problem. I tested the removed motor with a power supply and it is working. so it seem like the motor for the main roller brush in the robot doesn't get power.
@osamaallari6750 Жыл бұрын
Thank you very much, but after I replaced the main brush motor I faced a new problem, the vacuum suddenly stopped after 2 or 3 min working and totally shutdown then I have to return to the charging station to restart again can you help me with this problem
@ecovacstechnicalsupport5278 Жыл бұрын
Can plz WhatsApp a video clip at 00601137973018
@EliteTheReal Жыл бұрын
you think its possible to fix the motor or just order a new one? i cleaned it and its still goes on and off
@EliteTheReal Жыл бұрын
nvm i fixed it by switching the motor bearings and now it works again! ill uplaod a video on the t10plus soon
@ecovacstechnicalsupport5278 Жыл бұрын
Motor assembly need to replace sir
@mohitdadoo Жыл бұрын
From where do I get the motor assembly in india
@ecovacstechnicalsupport5278 Жыл бұрын
Sir h need to find online like Amazon, alibaba etc..
@ginarys6 ай бұрын
What about the side brushes?
@ecovacstechnicalsupport52786 ай бұрын
If you open deebot top cover then just remove motherboard screw n remove side brush motor screw...can replace same way...just one connector need to disconnect
@ginarys6 ай бұрын
@@ecovacstechnicalsupport5278 thank you!!!
@mbalihall1335 Жыл бұрын
The little red clip that holds the side brush has snapped on my Deebot T8 AIVI !! I think I need to replace the whole side brush motor , I’ve looked on the channel but I can’t seem to find a video addressing side brush motor issues. Anyone have experience with this ? Please help . Thanks
@ecovacstechnicalsupport5278 Жыл бұрын
Side brushe holder broken...in this case side brushe motor assembly need to replace...it comes in a assembly
@mbalihall133511 ай бұрын
Thanks ! Would it be possible to make a video of how to replace the side brush assembly ??? Please. I have looked through your videos but cannot find one replacing side brush motor!
@a.iskandar42026 ай бұрын
where is your shop?
@ecovacstechnicalsupport52786 ай бұрын
Amara buliverd service residency batu caves Malaysia
@happyhusky4283 Жыл бұрын
Do you know if this is a new or discontinued product ? ECOVACS Robotics - DEEBOT N10 MAX+ Vacuum and Mop Robot - BLACK
@ecovacstechnicalsupport5278 Жыл бұрын
Actually in different regions they are selling different models...N10 just lounged in Malaysia few months before... means it's one of the latest model
@happyhusky4283 Жыл бұрын
@@ecovacstechnicalsupport5278 ok. I bought one of $450 from Best Buy in USA , but I can’t find this product on ECOVACS website .. so I’m confused about this product 😕
@MaxPowder-db7on Жыл бұрын
😍
@putthinan Жыл бұрын
How can I order the main branch motor ?? Pls,tel me.
@ecovacstechnicalsupport5278 Жыл бұрын
Actually you need to surch online like Ali Xpress, Amazon etc... good this is one motor can use in various models so easy to find
@putthinan Жыл бұрын
Hi. Sorry again, I need you help.! I have now replaced the motor. finished but when reassembled The machine cannot work as before. The machine travels in a circle alternating left and right. cannot work in a straight line as before And the main wheel doesn't fall down when lifting the machine. My machine is a 920 Deebot ozmo, what should I do next?
@putthinan Жыл бұрын
@@ecovacstechnicalsupport5278 and the machine can’t back to the stand charger.!?
@fahdalosaimi5202 Жыл бұрын
فكيت كل شي عشان توصل للماطور
@ecovacstechnicalsupport5278 Жыл бұрын
نعم کل شی
@SeattleShelby10 ай бұрын
I can’t believe ECOVACS buried the weakest component in the system deep inside the device in a such a way that the whole damned thing has to be completely disassembled to replace it. That’s quite a departure from iRobot’s design, where everything is modular and easily replaced.
@ecovacstechnicalsupport527810 ай бұрын
Just only in new model got this design..older model all ok no Hassel to replace any parts...but it's ok.. won't spoil daily... maybe once a year need service...for ur car also you go to service centre right... so it's ok normal...but if you have free time U can do at home..if need any help can get my help anytime...☺️
@Texas_Painter4 ай бұрын
I thought I did everything right with no wires sticking out…. And now I’m getting the bumper is stuck error…😢 What do I do @Ecovacs_Technical_Support ? I have a T8.
@ecovacstechnicalsupport52784 ай бұрын
Plz send a small video clip at 00601137973018
@kyle79711 ай бұрын
Thank you very much. Not only for the main taking it apart bit, but also the putting back together!
@ecovacstechnicalsupport527811 ай бұрын
Welcome 🤗
@kyle79711 ай бұрын
Thank you very much. Not only for the main taking it apart bit, but also the putting back together!