Рет қаралды 6,216
Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ib/1AAC...
This video shows you how to install a new right CV axle in your 2012-2017 Toyota Camry. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This repair was done on a 2014 Toyota Camry SE 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry
Tools you will need:
• Pry Bar 1aau.to/o8Q/1AX...
• 14mm Socket 1aau.to/ob67/1A...
• 17mm Socket 1aau.to/ob67/1A...
• 21mm Socket
• 30mm 12-Point Socket 1aau.to/oav/1AA...
• 32mm Socket 1aau.to/oeg/1AA...
• 1/2 Inch Impact Gun 1aau.to/oyp/1AX...
• 1/2 Inch Breaker Bar 1aau.to/orP/1AX...
• Ratchet 1aau.to/ob8G/1A...
• Torque Wrench 1aau.to/oba5/1A...
• Anti-Seize Grease
• Gloves 1aau.to/oa48/1A...
• Safety Glasses
• Floor Jack 1aau.to/oaw8/1A...
• Hammer
• Jack Stands 1aau.to/oai9/1A...
• Rubber Mallet
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.