How to Replace Side View Mirrors 07-11 Honda CR-V

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@EricHillAuthor]

I purchased my replacement mirror through 1A Auto and just installed it. I'm not a natural fix-it myself guy. But after watching the video, I figured I could do it. It took no more than 30 minutes. Wasn't difficult at all. I think what made it a bit easier is I skipped the step about removing the inner door handle and electrical connector. I was able to do this by setting the door panel on a stool so that it didn't hang by its own weight. 1A Auto is a great resource!

[@richardhorner7723]

Thank you for this really helpful and informative video. My wife and I have just successfully replaced the nearside mirror on our CRV - and we're still speaking to each other!

[@lisapalm8767]

This was really helpful. I replaced my side mirror in about 25 minutes thanks to you. Dealer wanted to charge me $350 for part and $190 for 1.5 hours of labor! Mirror and tools cost less than $50! Thank you!

[@1AAuto]

+Lisa Palm Thank you! We are happy we could help!

[@scottsmith-bm6py]

Thank you 1AAuto. You guys rock. Took me a bit over an hour but video was indispensable. Hardest part was getting door panel to slide back in. But by tipping panel away from door at the bottom the lip finally slid in place. Amazingly, the exact same two clips referenced in video stayed behind for me, too. I was able to release the white plastic clip from door with two small blade screwdrivers. And... thank you KZbin, what would we do without you. Scott

[@ericlabs9380]

This video was excellent. With trim tools and parts from 1A Auto, the cost was $75 compared to $400 from the auto body store. Directions were perfect. One note to save steps: when I removed the door trim, I set it down on a chair that was almost the same height, so I did not have to disconnect the door handle assembly from the door or the electrical connector in the lower door. All you need is access to electrical connector by the mirror. Whole process took 20-30 minutes.

[@1AAuto]

+Eric Labs Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@madisonkinsey9764]

Just replaced my broken window with this video. It took me about 30 minutes, and I’ve never fixed anything on my car! Thanks guys, super helpful.

[@1AAuto]

+Madison Kinsey Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

[@adamb.4585]

This made the process a breeze. Thank you!!

[@susanpalmer683]

Thank you 1A Auto! I just replaced my passenger side view mirror. Your video walked me through every step.

[@christophernewkumet3814]

Nice, helpful video. Not sure why you'd have to remove the inner door handle assembly and main electrical connector in the door panel. At that point, can't you just lean the panel against the inside of the door while you remove/replace the mirror assembly?

[@ronaldgartzke8658]

You are right. There is no need to remove the inner door handle and the main electrical connector.

[@Veritow23]

Thanks for the video, I need to buy a side mirror replacement and need to test if it works, this would help me to do it!

[@timlewis48]

Wow. Hard to believe. We bought the mirror at an auto wreckers for $25.00, and the trim removal kit for $15. It took my brother-in-law and I right at thirty minutes to complete the job. The hardest part was repainting the mirror to match the car. Got paint at Pep boys. Thanks 1AAuto!

[@1AAuto]

Thanks for checking us out. 1aauto.com +Timothy Lewis

[@tonkaGuy888]

Excellent demo. Was much easier than I expected with your step by step. Many thanks for posting!

[@1AAuto]

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +tonkaslim

[@kurupt._.6347]

Why do you have to take the entire door panel off of you only need to detach the one mirror cable to take the mirror out?

[@varnelnoel1970]

Great video. Followed each step and replaced my side mirror perfectly!

[@mrjohnlowry]

What about just replacing the side mirror glass on a 2010 CRV, do you have any instructional vids for that?

[@GAZolloYT]

Thanks, this video was very helpful, replaced my mirror in no time.

[@DivineMizE]

YOU guys are my heroes. Best "how to" video! Well filmed, well explained, carefully and slowly. It was perfect, easy to follow and I'm a girl. Only thing I would add is after plugging 1st electrical into new unit, test it just to make sure. Also, the covers with hinges don't need to be removed. You saved me a lot of money! ⭐⭐⭐⭐⭐

[@1AAuto]

+DivineMizE Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@ahe970]

Thanks - u did it in 7 minutes but not sure why they made it so complicated - u have to remove the whole door panel to get to the mirror

[@johnpolowczyk2908]

Great video. My son and i changed the mirror out in about 30 min after watching this post.

[@1AAuto]

+John Polowczyk We are happy we could help!

[@longhuynh5249]

Very professional, thank-you

[@PankeerBaxi]

I have the Mirror Housing on the passenger side that is cracked. Is it possible to install just the housing without replacing the full assembly?

[@raduarfloe8528]

Awesome video!

[@seanbeasley6362]

Thanks a ton!!!! You saved me a ton of money

[@1AAuto]

+sean beasley Thanks for checking us out. 1aauto.com

[@dawnpeitzman1405]

Great video. I will be replacing my side view mirror in the next couple of weeks. Would you record a video on replacing a rear wiper MOTOR on the 2011 CR-V? I am needing to do that as well. Thanks!

[@Elle_Emenopy]

Video was perfect. Took me less than hour and saved me over $600.00. Video is idiot proof!

[@jameslund221]

I bought your 04 crv mirrors, and they don’t adjust up far enough? Do you have any pointers?

[@kira4495]

Thank you, you saved me

[@DrWenChannel]

If my CRV Side View Mirror easily got stuck but can still move, is there a way to lubricate the "inside" of the Side View Mirror so that it can work smoothly again? Thanks!

[@1AAuto]

+@DrWenChannel You would need to remove the mirror from the vehicle completely to be able to lubricate the inside.

[@footage6402]

When repairing stuff like bumpers were can we buy screws or nuts of the same exact ones in case one fell out

[@vladb3610]

Do we really need to remove the door panel ? Sounds a lot of work for just a mirror .

[@footage6402]

Where can you buy some of those covers in case they break?

[@healthfitnessmotivator8336]

I have a 2005 honda crv, Can I upgrade mirror to a newer model?

[@1AAuto]

+Health&Fitness Motivator Thanks for watching! Mirror must be replaced in an option-for-option fashion, so you could not upgrade from a new model.

[@nilminiwijesinghe6562]

Sudath Wijesinghe very good video

[@1AAuto]

+Nilmini Wijesinghe Thank you for your feedback! We are very proud of the videos we release.

[@miglandz007]

Idealnie i krok po kroku !

[@1AAuto]

+lukiluki Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@jeffbaker4092]

will this work on a 2014??

[@vaughanja]

I was successful in doing this, but now my electric widow buttons no longer work on the driver's side, and I can't lock or unlock anything. I'm assuming when I popped the panel back on, something dislodged electrical wiring in the area.

[@laellb]

Looks like the door panel needs to be removed to hook up the power. I'm not concerned with power, so will probably just replace the mirror and adjust manually.

[@jennifervannoland5241]

thank you! i'm a girl and was able to install this. thanks for this vid!

[@cxa011500]

Jesus...seems like a lot of steps. The video was good, but I'll probably still want to pay someone else to do it. Seems like I'll have to buy tools to do it and there are a lot of little parts that could get lost and have to be taken out and put back in the right order.