How To Replace Steering Rack & Pinion 2007-2014 Cadillac Escalade

Buy Now!
New Rack & Pinion Assembly from 1AAuto.com 1aau.to/ic/1AST...
The rack and pinion assembly transforms the turning motion of your steering wheel to the push and pull motions that turn the front wheels of your vehicle, as well as adding the power assistance. If the steering rack on your vehicle is leaking, or damaged in some way, you might need to replace it entirely. This video shows you how to install a new TRQ power steering rack and pinion assembly on your 2007-2014 Cadillac Escalade.
• Check here for more videos on the 2007-14 Cadillac Escalade: • Cadillac Escalade 2007...
This process should be similar on the following vehicles:
2007 Cadillac Escalade
2008 Cadillac Escalade
2009 Cadillac Escalade
2010 Cadillac Escalade
2011 Cadillac Escalade
2012 Cadillac Escalade
2013 Cadillac Escalade
2014 Cadillac Escalade
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• Pry Bar 1aau.to/oa/1AXA...
• 24mm Wrench
• 10mm Socket 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 18mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• 22mm Socket 1aau.to/oa/1AXA...
• 24mm Socket
• 8mm Socket 1aau.to/oa/1AXA...
• Adjustable Wrench
• Side Cutters
• Ratchet 1aau.to/oa/1AXA...
• Socket Extensions 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Rust Penetrant
• Hammer 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Cadillac Escalade 2007-14 3rd Gen: • Cadillac Escalade 2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@stevek3270]

This is the best video I have seen for this. Good job.

[@patrickmorrissey2271]

Great job on this video.... I just finished this job.... This one will test you, working on your garage floor.... It's really fun laying on your back, trying to push that torque wrench to 144 ft/lbs... Hahahah! But, it is doable. Great job on this video.... Everything is just what you showed, and what you said..... At least, my 14 Escalade, it was exactly what's in this video....

[@turvonc]

Thank you...just what I needed

[@ILIKE2FIXSTUFF]

I replaced on my 2010 escalade and now steering wheel is extremely sensitive. I touch it and it wanna turn. Is there a way to make steering wheel a bit harder to turn?

[@joshuabrown4864]

@TRQ what is the part number for the seals you put in the rack and pinion. My replacement didn't come with them either.

[@victorsvideos27]

Why was this rack & pinion replaced? What was wrong or what was the symptoms calling for it to be replaced? Great video by the way too!

[@memphistiger4647]

After 230K miles mine actually has a small leak. I was notified after I had my rear main seal replaced. After watching this I can do this myself.

[@elpasitostuntune.p.t.3625]

Can you show me the one for a 2018 Escalade just got the bad news right now been looking for a vid. But there ain't none

[@rafaelretana801]

I need help !! I need to remove rack and pinion from a Cadillac CTS 2011 3.0 asap any videos?

[@ILIKE2FIXSTUFF]

Do I really need to replace the entire rack & pinion because of worn bushings?

[@JeffWatt-nb7qd]

So there is no electrical going to the rack ? What might make the rack want to break your wrists after putting a jump box on and pulling with a tow strap 2000 feet and installing a starter ?

[@joshuabrown4864]

What is the part # for the seals you put in the rack? Thank you in advance

[@darianthompson5975]

Is this the same for the 4th gen(2015-2020?

[@Patriot168]

Thank you Didn't see part in link

[@joseone69]

Tommorrows job for me !

[@pmsrks]

Do you have any instruction on rack replacement on a 2010 SRX

[@TrickTomboy]

Do you have any extra advice for doing this on a 2009 STS? I cannot find a video for the STS.

[@TRQ]

+@TrickTomboy We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

[@CHB_98]

Wow a lot easier than a Acadia

[@AricHunn]

Is this 4wd? Is the process the same for a 2007 tahoe LTZ 4wd?

[@TRQ]

+Aric Hunn The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ

[@cadillacmando6465]

How can I diagnose a bad rack n pinion

[@josecantu4286]

Just saw harbor freight tools... nevermind

[@bill2677]

Hello is it the same for 2012 cadillac escalade hybrid?

[@Jacksonjames4]

What does the title say?

[@JBVantage1]

Is the the same as the CTS 4?

[@Jacksonjames4]

Does it say CTS4

[@joserivas8987]

👍👍

[@gabrielrangel4041]

Thou shalt not covet thy neighbors tools