How to Replace Tailgate Lock Actuator 1998-2002 Lincoln Navigator

Рет қаралды 3,100

Күн бұрын

Shop for New Auto Parts at 1AAuto.com trq.video/c-21-bq
This video shows you how to install a tailgate lock actuator on your 1998-2002 Lincoln Navigator. Power door lock systems typically use some sort of actuated motor to drive the lock mechanism. If the actuator breaks, then the door lock will no longer operate electronically.
This repair was done on a 2000 Lincoln Navigator Base 5.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
1998 Lincoln Navigator
1999 Lincoln Navigator
2000 Lincoln Navigator
2001 Lincoln Navigator
2002 Lincoln Navigator
Tools you will need:
• Phillips Bit in a Ratchet
• 8mm Socket trq.video/oaZU...
• Trim Tool Set trq.video/o5F-...
• Ratchet trq.video/obtn...
• Socket Extensions trq.video/objs...
• 3/8 Inch Drill Bit
• Gloves trq.video/oRt-...
• Painter's Tape
• Safety Glasses
• Hammer
• Pick trq.video/oKM-...
Subscribe: / @trq
Check out our playlist:
1998-2002 Lincoln Navigator 1st Gen: • 1998-2002 Lincoln Navi...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.