How to replace the front rocker arm/fork for JOYOR electric scooter Scooter Repair JOYOR S5 S8S S10S

[@efstratosps9380]

U are the Best i have s5 thanks for all

[@efrainlarios5951]

Where did you get those ratchets for the wheels?

[@tomodiero7524]

I don't care what anyone says these scooters are a deal for $700. They are built like a tank, it's an engineering marvel.

[@tahazohair]

Can you do rear suspension, also where to get the parts

[@Ahmed-bh8mq]

Hallo, where can i get the special tool for the damper?

[@Unholyftw89]

Hello. Please, is it possible to buy "the tool" somewhere? I will be changing the shock absorbers so im afraid i will need it.

[@marksungalon6419]

Hi there i have joyor s10s abd do u know where i can buy parts if somethibg went wrong with mine im from united states.

[@eduardoaraya8385]

Para el s10s se quita igual??

[@angelboyette208]

I have a s10 s the adjustable handlebar it keeps going down when I ride. Any suggestions? And I did tighten the. Stem Quick Release Clamp to so…

[@alexstewart4045]

You figured that out yet I know what’s up with it it’s a tiny middle bolt on the front of it. If it comes completely loose your whole clamp and a plastic thing in the middle will fall out.

[@angelboyette208]

I have a s10 s electric scooter I need tires do you know somewhere that I can get tires off routing tires because I have street tires on it now

[@Mechanic0007]

kzbin.info/www/bejne/rYeTc6uPj9KnaK8 you need a special wrench. #18mm. you can handmake one

[@Margwood_85ms]

THANKS, i have a joyor s10s and i dont know how remove the motor

[@Mechanic0007]

kzbin.info/www/bejne/movMc4GCbZyhb7s

[@kamilsabat4611]

Hello ! In advance thank you for the video. Could you please let me know what is the size of the puller ? m30x?? I am looking for information concerning thread pitch (m30x1.5 or m30x2 or m30x3?)

[@Mechanic0007]

The diameter of the large screw is 30mm is correct, but which size does 1.5/2/3 refer to?

[@kamilsabat4611]

@@Mechanic0007 Thank you. The pitch of a lead screw is simply the distance (spacing) between adjacent threads. Please see at google how to measure - usually the entire parameter of the thread is represented as: EXAMPLE M30x1.5 what state 30mm of diameter and 1.5 mm pitch.

[@SCOOTERREPAIR-kf2fn]

@@Mechanic0007 I think it's 1.5, because I measured the value between 1.5-1.8, which is less than 2.0

[@kamilsabat4611]

@@SCOOTERREPAIR-kf2fn Thank you for the comment and help ! However, my scooter has different size of the fork's threaded holes. After dimensioning and fitting couple of bolts: There is M32x2 if anybody else would like to know. There is no puller with this size on the market. Does yours is custom made ?

[@SCOOTERREPAIR-kf2fn]

@@kamilsabat4611 The factory gave it to me, I don't know if it is a special size

[@jihadsikder4491]

thank you sir