How to Replace Third Brake Light 2007-2013 Chevy Silverado

Buy Now!
New High Mount Third Brake Light from 1AAuto.com trq.video/ib-1...
New High Mount Third Brake Light from 1AAuto.com trq.video/ia-1...
This video shows you how to install the 3rd brake light housing in your 2007-2013 Chevy Silverado. The third brake light is just as important as your other tail lights. In many cases, a broken or burnt out 3rd brake light alone can fail a safety inspection. Avoid problems and increase safety by replacing your 3rd brake light assembly with one from TRQ designed to fit your specific vehicle.
This repair was done on a 2009 Chevrolet Silverado 1500 LTZ 5.3L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Phillips Head Screwdriver trq.video/oaYV...
• Trim Tool Set trq.video/oTh-...
• Cloth Rags trq.video/owo-...
Subscribe: / @trq
Check out our playlist:
Chevy Silverado 2nd Generation 2007-2014: • Chevy Silverado 2nd Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@hectorjr5128]

Thanks for the help now I should pass the inspection 🤣

[@paulmoody1859]

I need the two screws. Anybody know the GM part number?

[@BenStandOnTen]

Thank you

[@ctrlaltdel138]

Possibly the worst design ever. If it was made from a screen mesh it might collect less water.