How to Replace Throttle Body Gasket Chevy C/K1500 1988-2000

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/229/N...
Rough idle, poor performance, and a check engine light are all signs of throttle body problems. If a thorough cleaning didn’t resolve the issues, you may need to replace the gasket. This video shows you how to install a new, engineered to fit TRQ throttle body gasket on your Chevy C/K1500 1988-2000.
• Check here for more videos on the 1988-2002 Chevy K1500 • Chevy K1500 Pickup 198...
This process should be similar on the following vehicles:
1988 Chevrolet K1500 Truck
1989 Chevrolet K1500 Truck
1990 Chevrolet K1500 Truck
1991 Chevrolet K1500 Truck
1992 Chevrolet K1500 Truck
1993 Chevrolet K1500 Truck
1994 Chevrolet K1500 Truck
1995 Chevrolet K1500 Truck
1996 Chevrolet K1500 Truck
1997 Chevrolet K1500 Truck
1998 Chevrolet K1500 Truck
1999 Chevrolet K1500 Truck
Tools you will need:
• 10mm Wrench 1aau.to/oa/1AXA...
• 16mm Wrench
• 17mm Wrench 1aau.to/oa/1AXA...
• Pliers
• Torque Wrench 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
• Razor Blade / Gasket Scraper 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Chevy K1500 Pickup 1988-2002: • Chevy K1500 Pickup 198...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

[@ralphpomm4943]

I just got my gasket on. Everything went perfect. I did watch your video one last time for confidence. Thank you again for this video👍🏼

[@crease725]

Thanks for the video, I just want to know how you're sitting on the engine bay 🤣

[@guillermomejia9715]

I broke my bolt trying to reinstall the tbi looked online at it said 300lb torque and I'm like no way so I looked somewhere else and it says a 92 chevy tbi bolt 89 ft pounds and I'm still on feet about it but went ahead and torqued at 50ft lb they tried 80 then snapped right off only to find it its 12ft lb where can I try to find a replacement bolts?

[@abrahamrodas5955]

Does having the air filter housing that way work? Never seen it that way

[@wildestcowboy2668]

Absolutely Abe it allows all the hot air from the engine to go in an hurt your mpg!

[@loko664]

@@wildestcowboy2668 the truck already does that from factory with the preheater hose that goes from the exhaust manifold to the air cleaner 😂

[@kenfigueroa425]

It just gives it a nice intake noise when you floor it, check the first video on my channel of my 92 350 all stock with just a open air cleaner (or lid flip same thing).

[@jessesu2b447]

What are the first 2 gaskets you removed called?

[@mmafighter1868]

Thanks from Iraq

[@crawlerjunkie4512]

Thank you sir! Toque and everything!!!!

[@johnhawkins2700]

Thanks for the great video it helped me a lot. But now the transmission shifts real hard could the TPS gone bad

[@ninjabrox]

mid cold air intake . I tried it on my 94 c1500 step side and it make weird noises when I hit the gas pedal to far

[@fgoindarkg]

Thanks man. Good video.

[@120115135]

Do the gasket have direction?

[@anthonyriddick-bey7115]

What size was your socket

[@ralphpomm4943]

Thank you sir