How to Replace Valve Cover Gasket 2007-2011 Toyota Camry (2.4L L4)

Buy Now!
New Valve Cover Gasket Set from 1AAuto.com 1aau.to/ie/1AEG...
This video shows you how to install a new valve cover gasket from TRQ on your 2007-2011 Toyota Camry (2.4L V4). Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket set will make sure the oil stays inside the engine where it belongs!
This process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obwh/1A...
• 10mm Socket 1aau.to/obrg/1A...
• Trim Tool Set 1aau.to/oak3/1A...
• Vise-Grips
• Pliers
• E5 Socket
• Ratchet 1aau.to/obRa/1A...
• Torque Wrench 1aau.to/oaUD/1A...
• Cloth Rags 1aau.to/oHM/1AX...
• Gloves 1aau.to/oaAq/1A...
• RTV
• Safety Glasses
• Razor Blade / Gasket Scraper
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@joed2762]

Thank you for the video. It helps me remember where everything goes when I’m finished

[@gabrielguzman6388]

Why is the sealant only placed in that area?

[@binayshrestha-p3u]

Such a great video. With the help of this video anyone can save 100’s of bucks 🙏

[@hoyle7780]

Thanks this helped a TON! Tip though make sure the old gasket is completely gone because you may spend 30 min cussing wondering why the valve cover wont go back on properly lol

[@alphonsotownsend8208]

Thanks for your time and effort.

[@Mackey-q3v]

Great job, impressive.😊

[@arthurgao2108]

Nice video. Thanks!

[@trentonmiranda8477]

is the rtv sealant required?

[@Rrichie19]

Very nice, thank you!

[@100Bubbie]

My mechanic quoted me $132 plus tax

[@njsongwriter]

Wasn't the four cylinder in the 2010n& 2011 Camry the 2.5 liter AR-FE engine?

[@Blongster]

Very instructional video but here's some criticism: You are going way too fast. Try to go at a slower pace and never assume we know what we're doing. Maybe list some of the recommended tools we need and how many bolts we need to take out and get an overhead angle as best as you can on where their located.

[@ernestomoreno2596]

Good morning TRQ. Thank you for posting this video, very helpful. I have a question hopefully you can help me. I have a 2011 Toyota Camry I believe is 2.5 engine. The engine light came on and I put the scanner . The scanner read a couple of codes which I forgot the number I don’t have the report with me right now but it supposedly something wrong with ignition coil 4 and catalytic. I did change the ignition coil however, I did buy a used ignition coil and the one that I bought input it on #2 and the #2 I put it in #4. The engine still on and after I scanned again keep reading the same code. Please help. Thank you

[@joerosburns5639]

Really good video! Thanks!

[@tommytran7695]

I have someone quoted me today $100 for labor to change the valce gasket. Im in Garden Grove California

[@jessicaalvarez2927]

I did this and the exact same steps but now mine car won’t turn on. Any idea what can be causing this?

[@jamgay]

thorough instruction, Thanks

[@easy288]

I would have like to see the oil leakage in the video.

[@xierxu]

Can you show how to install the timing chain kit?

[@arthurgao2108]

Is RTV kind of gasket maker?

[@dekebell3307]

Thanks for sharing this!

[@yosephisrael6833]

What is an e5?

[@bonnon0brian]

@TRQ what is a fair price to charge to do this job for someone in your opinion. I told a friend of a friend, someone I have no affiliation with 600.00 plus parts. They said I was over charging which I thought was laughable. But wanted a second opinion.

[@bonnon0brian]

Disregard I thought originally this was entire head gasket video not just valve cover.

[@Jumhosani]

hi wich rtv did you used?

[@musicremixes847]

10:58 torq instr

[@danny-hh2gc]

Great video

[@asturian2937]

Hey Guy, "One of a kind" "EXCELLENT" video! Was totally floored at the excellence of your video. No other have I ever seen like yours with amazement. May Force Be With You always.... :)