How to Replace Wheel Bearing 2003-2011 Honda Element

Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ib/1AAX...
This video shows you how to install a wheel bearing on your 2003-2011 Honda Element. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2003 Honda Element
2004 Honda Element
2005 Honda Element
2006 Honda Element
2007 Honda Element
2008 Honda Element
2009 Honda Element
2010 Honda Element
2011 Honda Element
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa4x/1A...
• Impact Screwdriver 1aau.to/obt/1AX...
• Pry Bar 1aau.to/oJv/1AX...
• 19mm Wrench 1aau.to/oL9/1AX...
• 10mm Socket 1aau.to/oaNu/1A...
• 12mm Socket 1aau.to/oa5R/1A...
• 14mm Socket 1aau.to/oa5R/1A...
• 17mm Socket 1aau.to/oa5R/1A...
• 19mm Socket 1aau.to/o3B/1AX...
• 22mm Socket 1aau.to/omn/1AX...
• 36mm Socket 1aau.to/obt/1AA...
• Air Compressor
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/oai/1AX...
• Brake Caliper Hanger 1aau.to/ogC/1AX...
• Trim Tool Set 1aau.to/oVW/1AX...
• Needle nose pliers 1aau.to/oyd/1AX...
• Needle nose pliers 1aau.to/oyd/1AX...
• Snap Ring Pliers
• 1/2 Inch Impact Gun 1aau.to/onY/1AX...
• 1/2 Inch Breaker Bar 1aau.to/op2/1AX...
• Ratchet 1aau.to/obg2/1A...
• Torque Wrench 1aau.to/oanD/1A...
• Drill
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oxw/1AX...
• Gloves 1aau.to/oBk/1AX...
• Safety Glasses 1aau.to/ou8/1AX...
• Floor Jack 1aau.to/oQ4/1AX...
• Hammer 1aau.to/oLW/1AX...
• Jack Stands 1aau.to/oLQ/1AX...
• Punch
• Sledge Hammer 1aau.to/oLW/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/oqa/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@euonymus1980]

Nice video. Only thing I would suggest is when pressing the Hub into the bearing you support something on the back side of the inner race so the Hub does not split your bearing and push it apart

[@LovelyKauai]

Did I miss something? Where is the discussion on how to find and where to place the bearing for the sensor to work? And how about replacing the splash guard?

[@jareddahlseid551]

What lake did this vehicle get towed from?

[@vankoabv]

Don't you know anything about penetration oil like cheap WD40 ( or something pro )to be esier and faster for you to removenthat all rusty bolts and parts ???

[@diegoprieto6423]

The full replacement of the speed sensor is complicated ?

[@jerrygramlich5126]

Outstanding

[@themumbz]

Im currently doing this on mine and im stuck on setting up the knuckle on my press to press the hub out. Is that a rotor you used?

[@enokii]

Hrmm, doesn't seem like a difficult repair...

[@roodleypoodleydoodley]

What kind of grease?

[@TRQ]

+roodley poodley doodley You may use any type of grease, but it is suggested to use one with a synthetic base oil.

[@juliotezen]

Cuál es el número de cojinete