How to Replace Wheel Hub & Bearing Assembly 2003-2007 Nissan Murano

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a wheel hub and bearing assembly on your 2003-2007 Nissan Murano. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2003 Nissan Murano
2004 Nissan Murano
2005 Nissan Murano
2006 Nissan Murano
2007 Nissan Murano
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 12mm Socket 1aau.to/oa/1AXA...
• 14mm Socket 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• 32mm Socket 1aau.to/oa/1AAS...
• Pliers
• Wire Cutters
• Ratchet 1aau.to/oa/1AXA...
• Swivel
• Torque Wrench 1aau.to/oa/1AXA...
• Drill
• Anti-Seize Grease
• Brake Parts Cleaner
• Hammer 1aau.to/oa/1AXA...
• Wire Brush 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Nissan Murano 2003-2007 1st Generation: • Nissan Murano 2003-200...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@michaelbuffington8518]

Axle bearing x4: 51 ft lbs Axle bolt: 110 ft lbs Brake mount: 129 ft lbs Caliper mounting bolts: 20 ft lbs Lug nuts: 80 ft lbs

[@whoseyourdaaddy]

Thank you good video. Just bought the TRQ rotors, hubs, pads etc...

[@mr.selfdestruct2917]

Torque for axel nut is 129-130 as per nissan in byram nj

[@hassanbourobira4874]

Excellent excellent 👌

[@whoseyourdaaddy]

I noticed there wasn't a torque value for the axle nut?? Is there a safe torque so you don't over tighten??

[@michaelbuffington8518]

@TRQ, why don't you want to put grease on your brake mount bolts?

[@markholyoak9790]

I like the video very much but you forgot the high temp grease on the pads and on the capiler back

[@rayshowalter6265]

why use a rust bucket for quality repair?

[@FifthBoy]

2005=35mm spindle nut.

[@FifthBoy]

2005=36mm hub nut.