Рет қаралды 23,578
In this video i will show you how i reseal wire/spoke rims, thw items that you need are:
1 to 2 tubes of GE caulking
Caulk gun
2" paint brush
Stiff welding wire brush
Flat head screwdriver
Piece of flexible cardboard(cereal box)
Grinder with wire wheel
Step 1 - take off the old existing seal with the flat head screwdriver
Step 2 - use the grinder with a wire wheel to get rid of the seal left behind
Step 3 - use the welding wire brush to help get at the old seal by the nipples of the spokes
Step 4 - get the caulking into the gun and put caulking on to the nipples first like a circle
Step 5 - grab the paint brush and dab the caulking around the nipples, this helps to push the caulking into the nipple amd helps to take out the air bubbles
Step 6 - grab the caulking and zig zag a layer of caulking on to the nipples
Step 7 - out of the cereal box cardboard make a spreader like i did in the video amd evenly spread the caulking(make sure not to go too deep)
Step 8 - let the rim SIT FOR 4 DAYS BEFORE MOUNTING A TIRE ON IT.
Thanks watching, subscribe and like the video if it helped you out!