How to reset Canon pixma printer

hold the red triangle button and press the power button and remove the finger from the red button while holding the power button press the red button 4 to 5 times. It will work in the first reset but after a time you have to throw the printer because the counting chip installed on its circuit will not allow us to use it. Repairing cost will be equivalent to the price of the printer, trust me I had done it. Thanks please subscribe.

[@paulqmpo]

You earned a subscriber! Thank you!

[@something5769]

Thanks for the sub!

[@MamaDee737]

Thank you so much! Hold stop and power button for 3 seconds than press stop button 5 times while holding on/off button then release. Printer should start moving to reset itself. Repeat process till alert light goes off. This works you just have to be patient. Thanks again!

[@something5769]

Thanks for your valuable feedback 😍

[@scottlewis-87470]

Top top ! Ici pas de bla-bla. on ne voit que l'essentiel. Bravo çà a marché pour moi. MMMEEERRRCCCIII ! ! !

[@something5769]

Dhanyawaad!

[@thetaijicentre9704]

ALERT! Not everyone reads the intro after "..more" ! SO, Everyone Please note that if this process fails ie you were uncertain about what you did. You won't be able to repeat the RESET as it the printer is now a bin job!

[@something5769]

Don't worry if it works it's good and if not works there is an alternative to change its controller board which costs similar to price of printer, so you can decide to repair it or recycle ♻️

[@amadoreyes4030]

The worst printers are the Canon brands, I have bought two and a few days later they show orange light and no document can be printed, I have lost my money, the last one is MG2522

[@something5769]

I understand your problem as I also faced🥱

[@sergiobustamantemedina4676]

No entendí ni madres mudo, pero me sirvió... ya imprime y escanea... Gracias

[@something5769]

Please subscribe and help me also

[@juanacalderon2814]

Ty

[@something5769]

yours welcome

[@Tsithaelias]

U make me spoil my printer without solution

[@something5769]

Sorry for inconvenience 🙏🏽 .But these types of printer have only these types of solutions only

[@something5769]

that is the only way to reset and it works only one or two time.After it you can throw your printer because it is too costlier to repair .See description of video ,how many times you have to press button of printer

[@something5769]

That's the problem of printer. First company sell these types of printer in low cost and takes too much charge for maintenance greater than the price of printer😭

[@Tsithaelias]

Peace out🙏🙏

[@JackLangdon-yf6bb]

There are a dozen printer app what does the one I need look like reset printer to new Wi-Fi

[@something5769]

I am uploading another video for these problems so please subscribe to get notified

[@michaelcatalino3717]

PIXMA MG3220, HOW TO SET UO BLUTOOTH?

[@something5769]

sorry for the inconvenience I dont know about it

[@deborahrist4656]

I have no triangle button, i have a lil triangle and next to it a solid orange light its TS3322. HELP ERRORe03 no paper at all

[@something5769]

please send me model no and printer name details, then i will be able to help you

[@deborahrist4656]

TS3322 cannon pixma

[@kilanidamilare7880]

@deborahrist4656 pleese I’m having an orange light on my TS3451

[@pandeofficial]

Pixma 2470

[@pandeofficial]

Canon Pixma 2470

[@user-jw2yz9yr4h]

Mai to 2 bar patka hu TB jaakar thik hua ye

[@something5769]

Agli bar chhat se phek Dena ise😁

[@guedlove1636]

my printer is giving me the same problem, It's annoying me. help me

[@something5769]

My friend just calm down and take a deep breath and try it- hold the red triangle button and press the power button and remove the finger from the red button while holding the power button press the red button 4 to 5 times. It will work in the first reset but after a time you have to throw the printer because the counting chip installed on its circuit will not allow us to use it. Repairing cost will be equivalent to the price of the printer, trust me I had done it.I hope I lessen your stress.Please SUBSCRIBE as a friend.

[@LyndaKnight]

Please can you help me I get so far then when it comes to printing connection it just stop and nothing happens.

[@thescavenger957]

They never tell you about the "Counting Chip" when you purchase these Canon Pixma printers and they sell them so cheap to make money off us when it comes time to repair. I will be looking to buy other alternative printer brands 🤬

[@something5769]

You got it, their selling strategy

[@michaelcatalino3717]

How. About PIXMA MG3220? /

[@gyoung9127]

How to remove the A5 as that does not match the properties for 8/2 x 11

[@something5769]

just slide the tray given and set according to your paper size

[@mw10259]

SHOULD I JUST AIMLESSLY PUSH RANDOM BUTTONS ?

[@something5769]

hold the red triangle button and press power button and remove finger from red button while holding power button press red button 4 to 5 times. It will work in first reset but after a time you have to throw the printer because the counting chip installed on its circuit will not allow us to use it . Repairing cost will be equivalent to the price of printer ,trust me i had done it. Thanks please subscribe.

[@ashishshinde6374]

S my'n also not working...what to do...?

[@thetaijicentre9704]

NO!!!! DON'T DO THIS ANYONE! If the given instructions ddidnt work, maybe disconnect from power, come back later. ("Have a cup of tea") Reconnect the power supply, then and follow one more time EXACTLY. If that fails then its goodbye printer. [This is a logical device and cannot respond to random acts of FRUSTRATION!!!!!]

[@thetaijicentre9704]

​@@ashishshinde6374 He said that there is limited goes at reset. probably used yr limit now

[@redisename1356]

😂

[@mushana9326]

My canon printer not working i don't Know why i cant Even do anything light not blinking don't Know how to restart it

[@joyzelbaliwan8372]

Same

[@nursingupaslbi2191]

Ma questo finge di sapere e fa perdere tempo. Non si risolve con questo video fatto a caso

[@something5769]

To repair these type of printer is also a time waste. If this technique works then you are lucky else throw it in scrap.

[@dkmondal1649]

When you don't know how to reset the printer then why misleading others. Stop such vested interest income.

[@something5769]

that is the only way to reset and it works only one or two time.After it you can throw your printer because it is too costlier to repair .See description of video ,how many times you have to press button of printer

[@elainepatriciamolinamolina8776]

@@something5769 but in the video you don't even see that you fixed the printer, I did exactly what you did and the same thing happened to me as you did in the video now my printer doesn't want to print

[@something5769]

That's the problem of printer. First company sell these types of printer in low cost and takes too much charge for maintenance greater than the price of printer

[@Nicponadtodlatego]

Badziew

[@something5769]

Yeah I also thinks that this printer is rubbish 😂

[@JitendraKumar-ez6bd]

Arey bhai ye reset kaha hua

[@something5769]

bhai agar tumne ek ya do bar printer reset kiya hai to ye trick kam karegi aur printer print bhi karega.lekin ye permanent solution nahi hai iske bad chahe is printer ko fek do kyonki ye koi kam ka nahi service wala 1500-1800rs repair ka mangega itte mein to ye naya aa jayega.

[@saadmmcsoud1596]

What a joke

[@something5769]

Yeah 😂 this printer is rubbish

[@aichaisha1082]

🙄🙄🙄🙄

[@something5769]

hold the red triangle button and press power button and remove finger from red button while holding power button press red button 4 to 5 times. It will work in first reset but after a time you have to throw the printer because the counting chip installed on its circuit will not allow us to use it . Repairing cost will be equivalent to the price of printer ,trust me i had done it. Thanks please subscribe.

[@thewitchyblbl6036]

Perdida de tiempo, nunca ka arregla

[@something5769]

Si no lo entiendes, consulta la descripción. y si la canon pixma es una perdida de dinero y tiempo

[@619rclark]

No explanation?

[@something5769]

hold the red triangle button and press power button and remove finger from red button while holding power button press red button 4 to 5 times. It will work in first reset but after a time you have to throw the printer because the counting chip installed on its circuit will not allow us to use it . Repairing cost will be equivalent to the price of printer ,trust me i had done it. Thanks please subscribe.

[@lamborghini3072]

😂

[@something5769]

😊

[@sumitsingh-jh8qm]

Kaha hua reset bahi

[@something5769]

reset hua hai bhai par ye printer kharab hone ke bad ek bar hi kam karta hai . iske bad iske motherboard ki chip change karni padti hai jo ki printer se bhi mehanga hai.Plese subscribe

[@Your_local_furry997]

Canons suck

[@something5769]

It's true

[@jaugustin2418]

deges

[@Husera]

Bro what the hell are you doing

[@something5769]

I am resetting printer and for instructions please read description

[@user-yg5ww3tw6s]

WTF you didnt resolve anything!

[@fabianalucas8254]

😕

[@something5769]

what happened why are you sad

[@abircooldude]

Guy got frustrated

[@something5769]

Think before buying cartridge printer

[@rdbmexico4942]

Terrible explanation, all silent. 👎🏻

[@something5769]

Read the description under the video

[@mihirkhandavalli4435]

all the fucking canon printers are, they never worked for me

[@something5769]

i also thinks the same, they are just bin

[@asher6263]

Bullshit, no explanation?

[@something5769]

hold the red triangle button and press power button and remove finger from red button while holding power button press red button 4 to 5 times. It will work in first reset but after a time you have to throw the printer because the counting chip installed on its circuit will not allow us to use it . Repairing cost will be equivalent to the price of printer ,trust me i had done it. Thanks please subscribe.

[@tonydemorier7012]

I don't think this person has a clue what they are doing.

[@something5769]

Yeah because company has also no sense in building these types of shit, they are trash after printing upto the marked cycle encrypted in the bios of printer. Hope it helped you 🙏🏽

[@something5769]

Also read the description given below the video